EN 13842-2004 en Oil fired forced convection air heaters - Stationary and transportable for space heating《燃油式强制对流空气加热器 固定和可移动的空间加热器》.pdf

《EN 13842-2004 en Oil fired forced convection air heaters - Stationary and transportable for space heating《燃油式强制对流空气加热器 固定和可移动的空间加热器》.pdf》由会员分享，可在线阅读，更多相关《EN 13842-2004 en Oil fired forced convection air heaters - Stationary and transportable for space heating《燃油式强制对流空气加热器 固定和可移动的空间加热器》.pdf（44页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 13842:2004 Oil fired forced convection air heaters Stationary and transportable for space heating The European Standard EN 13842:2004 has the status of a British Standard ICS 97.100.40 BS EN 13842:2004 This British Standard was published under the authority of the Standards Po

2、licy and Strategy Committee on 4 August 2004 BSI 4 August 2004 ISBN 0 580 44197 0 National foreword This British Standard is the official English language version of EN 13842:2004. The UK participation in its preparation was entrusted to Technical Committee RHE/10, Heating boilers, which has the res

3、ponsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “

4、International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with

5、 a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related internati

6、onal and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 40, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was la

7、st issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN13842 July2004 ICS97.100.40 Englishversion OilfiredforcedconvectionairheatersStationaryand transportableforspaceheating Gnrateursdairchaudconvectionforcefonctionnant aufiouldomestiqu

8、eFixesettransportablespourle chauffagedeslocaux lbefeuerteWarmlufterzeugerOrtsfestundortsbeweglich frdieRaumheizung ThisEuropeanStandardwasapprovedbyCENon13May2004. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofana

9、tionalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undert

10、heresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,Luxembo

11、urg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2004CEN Allrightsofexploitationinanyformandbyanymeansr

12、eserved worldwideforCENnationalMembers. Ref.No.EN13842:2004:EEN 13842:2004 (E) 2 Contents page Foreword3 1 Scope 4 2 Normative references 4 3 Terms and definitions .5 4 Requirements of construction8 5 Constructional and operating requirements.12 6 Test methods15 7 Marking and instructions 27 Annex A

13、 (informative) Flue connections31 Annex B (normative) Classification according to the evacuation of the combustion products 32 Annex C (normative) Measurements .33 Bibliography 40 EN 13842:2004 (E) 3 Foreword This document (EN 13842:2004) has been prepared by Technical Committee CEN/TC 57 “Central h

14、eating boilers”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2005, and conflicting national standards shall be withdrawn at the latest by Janua

15、ry 2005. This document includes a Bibliography. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Gree

16、ce, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 13842:2004 (E) 4 1 Scope This document specifies the requirements and test methods for the safety and efficiency of

17、 oil-fired air heaters using only forced draught oil burners, hereafter referred to as “appliances”. This document applies to stationary and portable appliances. It also applies to appliances intended for outdoor installation. Provision of the heated air may be by means of ducting or may be directly

18、 into the heated space. For the purpose of this document the heat generation is by the combustion of liquid fuel oils as defined in EN 267 (gas oil with a viscosity at the burner inlet of 1,6 mm/s (cSt) up to 6 mm/s (cSt) at 20 C). Alternatively, if the manufacturer requests, the fuel of kerosene ma

19、y be used as defined in EN 304. Kerosene with a viscosity at the burner of 1,3 mm 2 /s (cSt) to 2,9 mm 2 /s (cSt) at 20 C) or other suitable liquid fuel oils may also be used. This document does not apply to: appliances intended for use in a single unit residential dwelling; appliances of the conden

20、sing type; appliances with atmospheric burners without a fan to assist the transportation of combustion air; dual purpose air conditioning appliances (heating and cooling); appliances where the air is heated by an intermediate fluid; appliances fitted with manual or automatic flue dampers; appliance

21、s having multiple heating units with a single flue; appliances fitted with more than one flue outlet. This document is applicable to appliances which are intended to be type tested. NOTE Requirements for appliances which are not type tested would need to be subject to further consideration. 2 Normat

22、ive references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 230, Monobloc oil burners Safet

23、y, control and regulation devices and safety times. EN 267, Forced draught oil burners Definitions, requirements, testing, marking. EN 304:1992, Heating boilers Test code for heating boilers for atomizing oil burners. prEN 50156-1, Electrical equipment for furnaces and ancillary equipment Part 1: Re

24、quirements for application design and installation. EN 60335-1:2002, Household and similar electrical appliances Safety Part 1: General requirements (IEC 60335-1:2001, modified). EN 60529, Degrees of protection provided by enclosures (IP code) (IEC 60529:1989). EN 13842:2004 (E) 5 EN 60730-2-1, Auto

25、matic electrical controls for household and similar use Part 2: Particular requirements for electrical controls for electrical household appliances (IEC 60730-2-1:1989, modified). EN 60730-2-9, Automatic electrical controls for household and similar use Part 2-9: Particular requirements for temperat

26、ure sensing controls (IEC 60730-2-9:2000, modified). EN ISO 1182:2002, Reaction to fire tests for building products - Non-combustibility test (ISO 1182:2002). 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 Appliance and its constituent parts

27、 3.1.1 stationary air heater fixed appliance designed for the heating and possibly ventilation of a building 3.1.2 forced convection air heater appliance designed to provide space heating from a central source by distributing heated air, by means of an air moving device, either through ducting or di

28、rectly into the heated space. The appliance may consists of the following components: combustion chamber; heat exchanger; fan with drive motor; housing (casing); air control device; integrated oil burner or atomising oil burner of the monobloc-type according to EN 267. The appliance may consist of s

29、everal assemblies which are joined together 3.1.3 portable warm air heaters appliance with a heat exchanger in accordance with 3.1.2 but designed to be portable or moveable. It may contain a built-in fuel tank 3.1.4 oil burner burner that is intended to assure the thermal function of the appliance a

30、nd is generally called the burner 3.1.5 Combustion products circuit 3.1.5.1 combustion chamber enclosure inside which combustion of the air-fuel mixture takes place 3.1.5.2 heat exchanger part of the appliance designed to transfer heat from the combustion products to the transport air EN 13842:2004

31、(E) 6 3.1.5.3 flue outlet part of the appliance that connects with a flue to evacuate the products of combustion 3.2 Adjusting, control and safety devices 3.2.1 automatic burner control system system comprising automatic start and stop sequencing flame detector device and flame supervision NOTE See

32、also EN 230 3.2.2 automatic shut-off valve valve designed to open the fuel supply to the burner when energised and to close automatically when de-energised 3.2.3 control thermostat device controlling the operation of the appliance (by on/off, high/low or modulating control) and enabling the temperat

33、ure to be kept automatically, within a given tolerance, at a predetermined value 3.2.4 overheat cut-off device device that shuts off and locks out the fuel supply to the burner when the temperature of the delivered air exceeds a certain pre-set value, and that requires manual intervention to restore

34、 the fuel supply. This should be before the appliance is damaged and/or before safety is put into question. This device is pre-set and sealed by the manufacturer (see 4.8.3.2) 3.2.5 fan delay control control that starts and/or stops the air delivery fan when the temperature of the delivered air reac

35、hes a certain predetermined value 3.2.6 temperature sensing element; temperature sensor component that detects the temperature of the environment to be supervised or controlled 3.2.7 modulating control automatic control by which the heat input of the appliance can be varied in a continuous manner be

36、tween the nominal heat input and a minimum value 3.2.8 high/low control automatic control which permits an appliance to operate either at the nominal heat input or at a fixed reduced heat input 3.3 Operation of the appliance 3.3.1 volumetric flow rate volume of fuel consumed by the appliance in unit

37、 time during continuous operation Symbol: V NOTE Litres per hour (l/h), cubic decimetres per hour (dm 3 /h). EN 13842:2004 (E) 7 3.3.2 mass flow rate mass of fuel consumed by the appliance in unit time during continuous operation Symbol: m NOTE Kilograms per hour (kg/h). 3.3.3 heat input quantity of

38、 energy used in unit time corresponding to the volumetric or mass flow rates, the calorific value to be used being the net calorific value Symbol: Q 0NOTE Kilowatts (kW). 3.3.4 nominal heat input value of heat input declared by the manufacturer Symbol: Q NNOTE Kilowatts (kW). 3.3.5 nominal heat outp

39、ut value of heat output declared by the manufacturer, which is the time related quantity of heat transferred to the delivered air. It is calculated as the heat input less the heat lost to the products of combustion leaving the flue Symbol: Q NOTE Kilowatts (kW). 3.3.6 delivered air volume time relat

40、ed volume of air leaving the appliance corrected to standard conditions of absolute pressure 1 013,25 mbar and temperature of 15 C NOTE Cubic metres per second (m 3 /s) or cubic metres per hour (m 3 /h). 3.3.7 delivered air pressure static pressure available within the duct system provided by the ap

41、pliance fan related to the delivered air volume NOTE Pascals (Pa) or millibar (mbar); 1 Pa = 1 N/m 2 ; 1 mbar = 100 N/m 2 . 3.3.8 controlled shut-down process where the power to the fuel shut off valves and/or the burner motor is removed immediately, e.g. as a result of the action of a controlling f

42、unction 3.3.9 safety shut-down process which is effected immediately following the response of a safety limiter or sensor or detection of a fault in the burner control system and which puts the burner out of operation by immediately removing the power to the fuel shut-off valves, the ignition device

43、 and/or the burner motor EN 13842:2004 (E) 8 3.3.10 lock-out safety shut-down condition of the system, such that a restart can only be accomplished by a manual reset of the system and by no other means 3.3.11 running condition of the system condition in which the burner is in normal operation under

44、the supervision of the programming unit and its flame detector 3.4 Conditions of operation and measurement 3.4.1 cold condition condition of the appliance required for some tests and obtained by allowing the unlit appliance to attain thermal equilibrium at room temperature 3.4.2 hot condition condit

45、ion of the appliance required for some tests and obtained by heating to thermal equilibrium at the nominal heat input specified by the manufacturer, any thermostat remaining fully open 3.4.3 equivalent resistance resistance to flow in millibars, measured at the outlet of the appliance, which is equi

46、valent to that of the actual flue Units: Pascal (Pa), Millibar (mbar) 3.5 Reference conditions - for calorific values, temperature 15 C; - for fuel and air volumes dry, brought to 15 C and absolute temperature of 1 013,25 mbar. 4 Requirements of construction 4.1 General When the appliance is install

47、ed in accordance with the manufacturers instructions, all components, including the heat exchanger, shall withstand the mechanical, chemical and thermal conditions to which they may be subjected in the course of normal use. If condensation occurs, this shall not affect the operational safety. With t

48、he exception of the outlet of the flue system, any condensate formed shall not drop outside the appliance. Asbestos or materials containing asbestos shall not be used. Solder that contains cadmium shall not be used. Where appropriate, materials used on the appliance shall be non-combustible in accordance with the requirements of EN ISO 1182. 4.2 Accessibility for maintenance and use Parts that are intended to be removable for maintenance or cleaning shall be readily accessible and capable of correct assembly and difficult t