EN 13631-12-2004 en Explosives for civil uses - High explosives - Part 12 Specifications of boosters with different initiating capability《民用爆炸物品 高能炸药 第12部分 不同起爆威力的起爆具规格》.pdf

《EN 13631-12-2004 en Explosives for civil uses - High explosives - Part 12 Specifications of boosters with different initiating capability《民用爆炸物品 高能炸药 第12部分 不同起爆威力的起爆具规格》.pdf》由会员分享，可在线阅读，更多相关《EN 13631-12-2004 en Explosives for civil uses - High explosives - Part 12 Specifications of boosters with different initiating capability《民用爆炸物品 高能炸药 第12部分 不同起爆威力的起爆具规格》.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 13631-12:2004 Explosives for civil uses High explosives Part 12: Specifications of boosters with different initiating capability The European Standard EN 13631-12:2004 has the status of a British Standard ICS 71.100.30 BS EN 13631-12:2004 This British Standard, was published u

2、nder the authority of the Standards Policy and Strategy Committee on 19 November 2004 BSI 19 November 2004 ISBN 0 580 44788 X National foreword This British Standard is the official English language version of EN 13631-12:2004. The UK participation in its preparation was entrusted to Technical Commi

3、ttee CII/61, Explosives for civil uses, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may b

4、e found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are

5、 responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and

6、keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 5 and a back cover. The BSI copyright notice displayed in this document

7、indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN1363112 November2004 ICS71.100.30 Englishversion ExplosivesforcivilusesHighexplosivesPart12: Specificationsofboosterswithdifferentinitiatingcapabili

8、ty ExplosifsusagecivilExplosifsPartie12: Dterminationdelacapacitdamoragedesrelaisde dtonation ExplosivstoffefrzivileZweckeSprengstoffeTeil12: FestlegungvonVerstrkungsladungenmit unterschiedlicherZndfhigkeit ThisEuropeanStandardwasapprovedbyCENon23August2004. CENmembersareboundtocomplywiththeCEN/CENE

9、LECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinth

10、reeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark

11、,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG Managem

12、entCentre:ruedeStassart,36B1050Brussels 2004CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN1363112:2004:EEN 13631-12:2004 (E) 2 Contents Page Foreword3 1 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 Description .4 4.1 Explosive 4 4

13、.2 Mass and diameter.4 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 93/15/EEC5 EN 13631-12:2004 (E) 3 Foreword This document (EN 13631-12:2004) has been prepared by Technical Committee CEN /TC 321 “Explosives for civil uses”, the s

14、ecretariat of which is held by AENOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2005, and conflicting national standards shall be withdrawn at the latest by May 2005. This document has b

15、een prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This European Standard is

16、 one of a series of standards on Explosives for civil uses - High Explosives. The other parts of this series are: prEN 13631-1 Part 1: Requirements. EN 13631-2 Part 2: Determination of thermal stability of explosives EN 13631-3 Part 3: Determination of sensitiveness to friction of explosives EN 1363

17、1-4 Part 4: Determination of sensitiveness to impact of explosives EN 13631-5 Part 5: Determination of resistance to water EN 13631-6 Part 6: Determination of resistance to hydrostatic pressure EN 13631-7 Part 7: Determination of safety and reliability at extreme temperatures EN 13631-10 Part 10: Ve

18、rification of the means of initiation EN 13631-11 Part 11: Determination of transmission of detonation EN 13631-13 Part 13: Determination of density EN 13631-14 Part 14: Determination of velocity of detonation prEN 13631-15 Part 15: Calculation of thermodynamic properties EN 13631-16 Part 16: Detect

19、ion and measurement of toxic gases According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,

20、Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 13631-12:2004 (E) 4 1 Scope This document specifies a series of boosters for testing purposes. 2 Normative references The follow

21、ing referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13857-1:2003, Explosives for civil uses - Part 1: Termin

22、ology 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 13857-1:2003 apply. 4 Description Three boosters of different initiating capability are defined by their composition (base explosive type and content), density, mass and diameter. 4.1 Explosive A p

23、entaerythritol tetranitrate (PETN)-based plastic explosive shall be used. The PETN content shall be a mass fraction of 82 % to 88 %. The density of the plastic explosive shall be 1,45 g/cm 3to 1,55 g/cm 3 . 4.2 Mass and diameter The boosters shall conform to Table 1. Table 1 Mass and diameter Type M

24、ass g Diameter mm I (small) 20 2 20 2 II (medium) 200 20 44 4 III (large) 1 000 100 75 7 EN 13631-12:2004 (E) 5 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 93/15/EEC. This European Standard has been prepared under a mandate given

25、to CEN by the European Commission and the European Free Trade Association to provide a means of conforming to Essential Requirements of the new approach Directive 93/15 EEC. Once this standard is cited in the Official Journal of the European Communities under that Directive and has been implemented

26、as a national standard in at least one Member State, compliance with the normative clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with II.1(m) and II.2.A(a) of that Directive and associated EFTA regulations. WARNING : Other requirements

27、 and other EU Directives may be applicable to the product(s) falling within the scope of this standard. BS EN 13631-12:2004 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK

28、view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve

29、 the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fa

30、x: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services.

31、 Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, un

32、less otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its

33、products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other

34、benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at

35、 http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval s

36、ystem or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.