EN 13616-1-2016 en Overfill prevention devices for static tanks for liquid fuels - Part 1 Overfill prevention devices with closure device《液体石油燃料用固定罐的防溢出设备-第1部分 溢出带封口装置的防护装置》.pdf

《EN 13616-1-2016 en Overfill prevention devices for static tanks for liquid fuels - Part 1 Overfill prevention devices with closure device《液体石油燃料用固定罐的防溢出设备-第1部分 溢出带封口装置的防护装置》.pdf》由会员分享，可在线阅读，更多相关《EN 13616-1-2016 en Overfill prevention devices for static tanks for liquid fuels - Part 1 Overfill prevention devices with closure device《液体石油燃料用固定罐的防溢出设备-第1部分 溢出带封口装置的防护装置》.pdf（40页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN 13616-1:2016Overfill prevention devices forstatic tanks for liquid fuelsPart 1: Overfill prevention devices withclosure deviceBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 13616-1:2016 BRITISH STANDARDNational forewordThis British Standard is the UK imp

2、lementation of EN 13616-1:2016. Together with BS EN 13616-2:2016 and BS EN 16657:2016, it supersedes BS EN 13616:2004 which is withdrawn.The UK participation in its preparation was entrusted by Technical Committee PVE/393, Equipment for storage tanks and filling stations, to Subcommittee PVE/393/3,

3、Overfill prevention devices.A list of organizations represented on this subcommittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Instituti

4、on 2016. Published by BSI Standards Limited 2016ISBN 978 0 580 83539 1ICS 23.020.10Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2016.Amendments/corrig

5、enda issued since publicationDate Text affectedBS EN 13616-1:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13616-1 June 2016 ICS 23.020.10 Supersedes EN 13616:2004English Version Overfill prevention devices for static tanks for liquid fuels -Part 1: Overfill prevention devices with closur

6、e device Dispositifs limiteurs de remplissage pour rservoirs statiques pour carburants liquides - Partie 1: Dispositifs limiteurs de remplissage avec dispositif de fermeture berfllsicherungen fr ortsfeste Tanks fr flssige Brenn- und Kraftstoffe - Teil 1: berfllsicherungen mit Schlieeinrichtung This

7、European Standard was approved by CEN on 8 April 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

8、concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN membe

9、r into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, Fran

10、ce, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOM

11、ITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13616-1:2016 EBS EN 13616-1:2016EN 13616-1:2016 (E) 2 Contents Page European foreword . 4 1 Scope

12、 5 2 Normative references 5 3 Terms and definitions . 5 4 Requirements . 6 4.1 General 6 4.1.1 Vapour tight 6 4.1.2 Non vapour tight 6 4.2 Effectiveness . 6 4.2.1 General 6 4.2.2 Operational flow range and operational pressure range . 6 4.2.3 Pressure surge range . 7 4.2.4 Closure level range . 7 4.

13、2.5 Operational leak rate . 7 4.3 Construction 7 4.4 Durability against wear from closure cycles . 8 5 Test methods 8 5.1 General 8 5.2 Chemical suitability test . 8 5.3 Temperature range test 8 5.4 Component pressure tests . 9 5.5 Function tests . 9 5.5.1 General 9 5.5.2 Final closure level test .

14、9 5.5.3 Operational leak rate after final closure level test 10 5.5.4 Pressure surge test 10 5.6 Mechanical strength 10 5.7 Vapour tight Non vapour tight test procedure . 11 5.7.1 Vapour tight test procedure . 11 5.7.2 Non vapour tight test procedure 11 5.8 Durability test 11 6 Assessment and verifi

15、cation of constancy of performance - AVCP 11 6.1 General . 11 6.2 Type testing 11 6.2.1 General . 11 6.2.2 Test samples, testing and compliance criteria 12 6.2.3 Test reports 13 6.2.4 Shared other party results 13 6.2.5 Cascading determination documentation of the product type testing results 14 6.3

16、 Factory production control (FPC) 15 6.3.1 General . 15 6.3.2 Requirements 15 6.3.3 Product specific requirements 18 6.3.4 Procedure for modifications 18 BS EN 13616-1:2016EN 13616-1:2016 (E) 3 6.3.5 One-off products, pre-production products (e.g. prototypes) and products produced in very low quanti

17、ty . 19 7 Classification 19 8 Marking, labelling and packaging . 20 8.1 Identification 20 8.2 Instruction plate . 20 8.3 Technical documentation 20 Annex A (normative) Equipment for use in a hazardous area 21 A.1 General . 21 A.2 Avoidance or reduction of ignition sources 21 A.3 Electrical equipment

18、 . 21 A.4 Non-electrical equipment 21 A.5 Electrostatic discharge . 21 Annex B (normative) Test rigs layouts. 22 Annex C (normative) Additional information on diameter and flow rate 23 Annex D (informative) Environmental checklist 24 Annex ZA (informative) Clauses of this European Standard addressin

19、g the provisions of the EU Construction Products Regulation . 26 ZA.1 Scope and relevant characteristics 26 ZA.2 Procedure for AVCP of overfill prevention devices with closure device 27 ZA.2.1 System(s) of AVCP . 27 ZA.2.2 Declaration of performance (DoP) . 28 ZA.2.2.1 General . 28 ZA.2.2.2 Content

20、. 28 ZA.2.2.3 Example of DoP . 29 ZA.3 CE marking and labelling . 31 Annex ZB (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2014/34/EU 33 Bibliography . 34 BS EN 13616-1:2016EN 13616-1:2016 (E) 2 Contents Page European foreword . 4 1 Scope 5

21、 2 Normative references 5 3 Terms and definitions . 5 4 Requirements . 6 4.1 General 6 4.1.1 Vapour tight 6 4.1.2 Non vapour tight 6 4.2 Effectiveness . 6 4.2.1 General 6 4.2.2 Operational flow range and operational pressure range . 6 4.2.3 Pressure surge range . 7 4.2.4 Closure level range . 7 4.2.

22、5 Operational leak rate . 7 4.3 Construction 7 4.4 Durability against wear from closure cycles . 8 5 Test methods 8 5.1 General 8 5.2 Chemical suitability test . 8 5.3 Temperature range test 8 5.4 Component pressure tests . 9 5.5 Function tests . 9 5.5.1 General 9 5.5.2 Final closure level test . 9

23、5.5.3 Operational leak rate after final closure level test 10 5.5.4 Pressure surge test 10 5.6 Mechanical strength 10 5.7 Vapour tight Non vapour tight test procedure . 11 5.7.1 Vapour tight test procedure . 11 5.7.2 Non vapour tight test procedure 11 5.8 Durability test 11 6 Assessment and verifica

24、tion of constancy of performance - AVCP 11 6.1 General . 11 6.2 Type testing 11 6.2.1 General . 11 6.2.2 Test samples, testing and compliance criteria 12 6.2.3 Test reports 13 6.2.4 Shared other party results 13 6.2.5 Cascading determination documentation of the product type testing results 14 6.3 F

25、actory production control (FPC) 15 6.3.1 General . 15 6.3.2 Requirements 15 6.3.3 Product specific requirements 18 6.3.4 Procedure for modifications 18 BS EN 13616-1:2016EN 13616-1:2016 (E) 3 6.3.5 One-off products, pre-production products (e.g. prototypes) and products produced in very low quantity

26、 . 19 7 Classification 19 8 Marking, labelling and packaging . 20 8.1 Identification 20 8.2 Instruction plate . 20 8.3 Technical documentation 20 Annex A (normative) Equipment for use in a hazardous area 21 A.1 General . 21 A.2 Avoidance or reduction of ignition sources 21 A.3 Electrical equipment .

27、 21 A.4 Non-electrical equipment 21 A.5 Electrostatic discharge . 21 Annex B (normative) Test rigs layouts. 22 Annex C (normative) Additional information on diameter and flow rate 23 Annex D (informative) Environmental checklist 24 Annex ZA (informative) Clauses of this European Standard addressing

28、the provisions of the EU Construction Products Regulation . 26 ZA.1 Scope and relevant characteristics 26 ZA.2 Procedure for AVCP of overfill prevention devices with closure device 27 ZA.2.1 System(s) of AVCP . 27 ZA.2.2 Declaration of performance (DoP) . 28 ZA.2.2.1 General . 28 ZA.2.2.2 Content .

29、28 ZA.2.2.3 Example of DoP . 29 ZA.3 CE marking and labelling . 31 Annex ZB (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2014/34/EU 33 Bibliography . 34 BS EN 13616-1:2016EN 13616-1:2016 (E) 4 European foreword This document (EN 13616-1:201

30、6) has been prepared by Technical Committee CEN/TC 393 “Equipment for storage tanks and for filling stations”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest

31、 by December 2016, and conflicting national standards shall be withdrawn at the latest by 2017-07-11. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such

32、 patent rights. This document, together with EN 13616-2 and EN 16657, supersedes EN 13616:2004. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship wi

33、th EU Directive(s), see informative Annex ZA or ZB, which is an integral part of this document. According to EN 13616:2004, the following fundamental changes are given: splitting of EN 13616:2004; the new EN 13616, under the general title Overfill prevention devices for static tanks for liquid fuels

34、, will consist of the following parts: Part 1: Overfill prevention devices with closure device; Part 2: Overfill prevention devices without closure device. parameters regarding explosion safety updated; informative Annex C concerning environmental aspects added; the requirements for overfill prevent

35、ion devices without closure device on static tanks are in EN 13616-2; the requirements for overfill prevention devices without closure device on the tank vehicle were moved to EN 16657, Tanks for the transport of dangerous goods Transport tank equipment for overfill prevention devices for static tan

36、ks. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,

37、 Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13616-1:2016EN 13616-1:2016 (E) 5 1 Scope This European Standard contains req

38、uirements, test and assessment methods, marking, labelling and packaging applicable to overfill prevention devices with closure device. The devices are usually composed by sensor, evaluation device, closure device. Overfill prevention devices intended to be used in/with underground and/or above grou

39、nd, non-pressurized, static tanks designed for liquid fuels. NOTE Liquid fuel means liquids for internal combustion engines, heating/cooling boilers and generators. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable

40、for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1127-1:2011, Explosive atmospheres Explosion prevention and protection Part 1: Basic concepts and methodology EN 148

41、79-4:2007, Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Part 4: Linings on metallic components EN 60079-14, Explosive atmospheres Part 14: Electrical installations design, selection and erection (IEC 60079-14) EN I

42、SO 80079-36:2016, Explosive atmospheres Part 36: Non-electrical equipment for explosive atmospheres Basic method and requirements (ISO 80079-36:2016) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 overfill prevention device device installed

43、in a supply system, which automatically stops the delivery, preventing the liquid level in the tank exceeding a final closure level 3.2 initial closure level lower level than final closure level at which the overfill prevention device stops the liquid flow and which level it can be reopened 3.3 fina

44、l closure level level at which the overfill prevention device prevents any further product, apart from a permissible leak rate, entering the storage tank BS EN 13616-1:2016EN 13616-1:2016 (E) 4 European foreword This document (EN 13616-1:2016) has been prepared by Technical Committee CEN/TC 393 “Equ

45、ipment for storage tanks and for filling stations”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2016, and conflicting national standards shall

46、 be withdrawn at the latest by 2017-07-11. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document, together with EN 13616-2 and

47、 EN 16657, supersedes EN 13616:2004. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA or ZB, which i

48、s an integral part of this document. According to EN 13616:2004, the following fundamental changes are given: splitting of EN 13616:2004; the new EN 13616, under the general title Overfill prevention devices for static tanks for liquid fuels, will consist of the following parts: Part 1: Overfill pre

49、vention devices with closure device; Part 2: Overfill prevention devices without closure device. parameters regarding explosion safety updated; informative Annex C concerning environmental aspects added; the requirements for overfill prevention devices without closure device on static tanks are in EN 13616-2; the requirements for overfill prevention devices without closure device on the tank vehicle were moved to EN 16657, Tanks for the transport of dangerous goods Transport tank equipment for overfill prevention dev