EN 13458-2-2002 en Cryogenic vessels - Static vacuum insulated vessels - Part 2 Design fabrication inspection and testing《冷冻容器 静态真空绝缘容器 第2部分 设计 制造 检查和试验》.pdf

《EN 13458-2-2002 en Cryogenic vessels - Static vacuum insulated vessels - Part 2 Design fabrication inspection and testing《冷冻容器 静态真空绝缘容器 第2部分 设计 制造 检查和试验》.pdf》由会员分享，可在线阅读，更多相关《EN 13458-2-2002 en Cryogenic vessels - Static vacuum insulated vessels - Part 2 Design fabrication inspection and testing《冷冻容器 静态真空绝缘容器 第2部分 设计 制造 检查和试验》.pdf（110页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 13458-2:2002 Cryogenic vessels Static vacuum insulated vessels Part 2: Design, fabrication, inspection and testing The European Standard EN 13458-2:2002 has the status of a British Standard ICS 23.020.40 BS EN 13458-2:2002 This British Standard, having been prepared under the

2、direction of the Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 29 November 2002 BSI 29 November 2002 ISBN 0 580 40880 9 National foreword This British Standard is the official English language version of EN 13458

3、-2:2002. The UK participation in its preparation was entrusted to Technical Committee PVE/18, Cryogenic vessels, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement

4、international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not

5、 purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European com

6、mittee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to

7、 107 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13458-2 November 2002 ICS 23.020.40 English version Cryogenic vessels -

8、 Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing Rcipients cryogniques - Rcipients fixes isols sous vide - Partie 2: Conception, fabrication, inspection et essais Kryo-Behlter - Ortsfeste vakuum-isolierte Behlter - Teil 2: Bemessung, Herstellung und Prfung This

9、European Standard was approved by CEN on 12 August 2002. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical reference

10、s concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its

11、 own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, S

12、pain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2002 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN nation

13、al Members. Ref. No. EN 13458-2:2002 EEN 13458-2:2002 (E) 2 Contents page Foreword .3 1 Scope .4 2 Normative references.4 3 Terms, definitions and symbols .6 4 Design 8 5 Fabrication .54 6 Inspection and testing 61 Annex A (normative) Elastic stress analysis.68 Annex B (normative) Additional require

14、ments for 9 % Ni steel.77 Annex C (informative) Pressure strengthening of vessels from austenitic stainless steels79 Annex D (normative) Pressure limiting systems.90 Annex E (normative) Further use of the material cold properties to resist pressure loads.91 Annex F (informative) Specific weld detail

15、s 95 Annex G (normative) Additional requirements for flammable fluids .99 Annex H (informative) Non-design requirements for flammable fluids .100 Annex I (normative) Outer jacket relief devices 101 Annex J (informative) Increased material property for austenitic stainless steel103 Annex K (normative

16、) Base materials 104 Annex L (informative) Other materials .105 Annex ZA (informative) Clauses of this European Standard addressing essential requirements or other provisions of EU directives106 Bibliography 107EN 13458-2:2002 (E) 3 Foreword This document (EN 13458-2:2002) has been prepared by Techn

17、ical Committee CEN/TC 268 “Cryogenic vessels“, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2003, and conflicting national standards shall be with

18、drawn at the latest by May 2003. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integ

19、ral part of this document. In this European Standard the annexes A, B E, G, I and K are normative and the annexes C, D, F, H and J are informative. EN 13458 consists of the following Parts under the general title, Cryogenic vessels Static vacuum insulated vessels Part 1: Fundamental requirements Par

20、t 2: Design, fabrication, inspection and testing Part 3: Operational requirements According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, Fran

21、ce, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.EN 13458-2:2002 (E) 4 1 Scope This European Standard specifies requirements for the design, fabrication, inspection and testing of static vacuum insulated

22、 cryogenic vessels designed for a maximum allowable pressure of more than 0,5 bar. This European Standard is applicable to static vacuum insulated cryogenic vessels for fluids as specified in EN 13458-1, and does not apply to vessels designed for toxic fluids. For static vacuum insulated cryogenic v

23、essels designed for a maximum allowable pressure of not more than 0,5 bar this standard can be used as a guide. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places

24、 in the text, and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referr

25、ed to applies (including amendments). EN 287-1, Approval testing of welders Fusion welding Part 1: Steels. EN 287-2, Approval testing of welders Fusion welding Part 2: Aluminium and aluminium alloys. EN 288-3:1992, Specification and approval of welding procedures for metallic materials Part 3: Weldi

26、ng procedure tests for the arc welding of steels. EN 288-4:1992, Specification and approval of welding procedures for metallic materials Part 4: Welding procedure tests for the arc welding of aluminium and its alloys. EN 288-8, Specification and approval of welding procedures for metallic materials

27、Part 8: Approval by a pre- production welding test. EN 473, Qualification and certification of NDT personnel General principles. EN 875:1995, Destructive tests on welds in metallic materials Impact tests Test specimen location, notch orientation and examination. EN 895:1995, Destructive tests on wel

28、ds in metallic materials Transverse tensile test. EN 910:1996, Destructive tests on welds in metallic materials Bend tests. EN 1252-1:1998, Cryogenic vessels Materials Part 1: Toughness requirements for temperatures below 80 C. EN 1252-2, Cryogenic vessels Materials Part 2: Toughness requirements fo

29、r temperatures between 80 C and 20 C. EN 1418, Welding personnel Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanised and automatic welding of metallic materials. EN 1435, Non-destructive examination of welds Radiographic examination of welded joi

30、nts. EN 1626, Cryogenic vessels Valves for cryogenic service. EN 1797, Cryogenic vessels Gas/material compatibility. EN 10028-4, Flat products made of steels for pressure purposes Part 4: Nickel alloy steels with specified low temperature properties.EN 13458-2:2002 (E) 5 EN 10028-7:2000, Flat produc

31、ts made of steels for pressure purposes Part 7: Stainless steels. prEN 10216-5, Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes. prEN 10217-7, Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel

32、 tubes. EN 12300, Cryogenic vessels Cleanliness for cryogenic service. EN 13068-3, Non-destructive testing Radioscopic testing Part 3: General principles of radioscopic testing of metallic materials by X- and gamma rays. EN 13133, Brazing Brazer approval. EN 13134, Brazing Procedure approval. EN 134

33、45-3, Unfired pressure vessels Part 3: Design. EN 13445-4, Unfired pressure vessels Part 4: Fabrication. EN 13458-1:2002, Cryogenic vessels Static vacuum insulated vessels - Part 1: Fundamental requirements. prEN 13458-3, Cryogenic vessels Static vacuum insulated vessels Part 3: Operational requirem

34、ents. prEN 13648-1, Cryogenic vessels Safety devices for protection against excessive pressure Part 1: Fundamental requirements prEN 13648-3, Cryogenic vessels Safety devices for protection against excessive pressure Part 3: Determination of required discharge Capacity and sizing. prEN ISO 4126-2, S

35、afety devices for protection against excessive pressure Part 2: Bursting disc safety devices (ISO/DIS 4126-2:1996). EN ISO 6520-1:1998, Welding and allied processes Classification of geometrical imperfections in metallic materials Part 1: Fusion welding (ISO 6520-1:1998). ISO 1106-1, Recommended pra

36、ctice for radiographic examination of fusion welded joints - Part 1: Fusion welded butt joints in steel plates up to 50 mm thick. SA-353/A353M, Specification for pressure vessel plates, alloy steel, 9 percent nickel, double-normalized and tempered. SA-479/SA-479M, Specification for stainless steel b

37、ars and shapes for use in boilers and other pressure vessels. SA-522/SA-522M, Specification for forged or rolled 8 and 9% nickel alloy steel flanges, fittings, valves and parts for low-temperature service. SA-553/SA-553M, Specification for pressure vessel plates, alloy steel quenched and tempered 8

38、and 9 percent nickel.EN 13458-2:2002 (E) 6 3 Terms, definitions and symbols 3.1 Terms and definitions For the purposes of this European Standard, the following terms and definitions apply. 3.1.1 static vessel stationary unit capable of receiving, storing (under pressure) and dispensing cryogenic flu

39、ids. The vessel is not intended to be used for transporting liquid product 3.1.2 inner vessel pressure vessel proper intended to contain the cryogenic fluid 3.1.3 outer jacket gas-tight enclosure which contains the inner vessel and enables a vacuum to be established 3.1.4 automatic welding welding i

40、n which the parameters are automatically controlled. Some of these parameters may be adjusted to a limited extent, either manually or automatically, during welding to maintain the specified welding conditions 3.1.5 maximum allowable pressure, p s maximum pressure for which the equipment is designed,

41、 as specified by the manufacturer, defined at a location specified by the manufacturer, being the location of connection of protective or limiting devices or the top of the equipment NOTE p sis equivalent to PS used in article 1, 2.3 of the PED. 3.1.6 relief plate/plug plate or plug retained by atmo

42、spheric pressure only which allows relief of excess internal pressure 3.1.7 bursting disc device non-reclosing pressure relief device ruptured by differential pressure. It is the complete assembly of installed components including where appropriate the bursting disc holder 3.2 Symbols NOTE Throughou

43、t this European Standard p sis equivalent to PS used in article 1, 2.3 of the PED and p T is equivalent to PT used in Annex I of the PED. For the purposes of this standard, the following symbols apply: c allowances mm d i diameter of opening mm d a outside diameter of tube or nozzle mm f narrow side

44、 of rectangular or elliptical plate mm b l buckling length mmEN 13458-2:2002 (E) 7 n number - p design pressure as defined by 4.2.3.2 j) and 4.3.3.2 bar p e allowable external pressure limited by elastic buckling bar p k strengthening pressure bar p p allowable external pressure limited by plastic d

45、eformation bar p T pressure test (see 4.2.3.2 g) bar r radius e.g. inside knuckle radius of dished end and cones mm s minimum wall thickness mm s e actual wall thickness mm v factor indicative of the utilisation of the permissible design stress in joints or factor allowing for weakenings - x (decay-

46、length zone) distance over which governing stress is assumed to act mm A area mm 2 A 5 elongation at fracture C design factors - D shell diameter mm D a outside diameter e.g. of a cylindrical shell mm D i internal diameter e.g. of a cylindrical shell mm E Youngs modulus N/mm 2 I moment of inertia of

47、 stiffening ring mm 4 K material property (see 4.3.2.3.1) N/mm 2 K 20 see 4.3.2.3.2 K t see 4.3.2.3.3 K design a value defined by the manufacturer for a particular design case R radius of curvature e.g. inside crown radius of dished end mm S safety factor at design pressure - k S safety factor again

48、st elastic buckling at design pressure - p S safety factor against plastic deformation at design pressure - T S safety factor against plastic deformation at proof test pressure -EN 13458-2:2002 (E) 8 Z auxiliary value - v Poissons ratio - u out of roundness k design stress value N/mm 2 4 Design 4.1

49、Design options 4.1.1 General The design shall be carried out in accordance with one of the options given in 4.1.2, 4.1.3 or 4.1.4. In the case of 9 % Ni steel, the additional requirements of annex B shall be satisfied. For carbon and low alloy steels the requirements of EN 1252-2 shall be satisfied. When further use of cold properties is considered the requirements of annex E shall be satis