EN 13274-5-2001 en Respiratory Protective Devices - Methods of Test - Part 5 Climatic Conditions《呼吸保护装置的试验方法 第5部分 气候条件》.pdf

《EN 13274-5-2001 en Respiratory Protective Devices - Methods of Test - Part 5 Climatic Conditions《呼吸保护装置的试验方法 第5部分 气候条件》.pdf》由会员分享，可在线阅读，更多相关《EN 13274-5-2001 en Respiratory Protective Devices - Methods of Test - Part 5 Climatic Conditions《呼吸保护装置的试验方法 第5部分 气候条件》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD Respiratory protective devices - Methods of test - Part 5: Climatic conditions The European Standard EN 13274-52001 has the status of a British Standard ICs 13.340.30 BS EN 132 74-5: 200 1 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BS EN 13274-5:2001 Amd.

2、 No. National foreword Date Comments This British Standard is the official English language version of The UK participation in its preparation was entrusted by Technical Committee PH/4, Respiratory protection, to Subcommittee PH/4/9, Test methods and interpretation, which has the responsibility to:

3、EN 13274-5:2001. - - aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. - A list o

4、f organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence I

5、ndex”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself

6、 confer immunity from legal obligations. This British Standard, having been prepared under the direction of the Health and Environment Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 June 2001 Summary of pages This document comprises a front

7、 cover, an inside front cover, the EN title page, pages 2 to 7 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. O BSI 06-2001 ISBN O 580 37527 7 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM a EN 13274-5 April 2001 ICs 13.340.30 Eng

8、lish version Respiratory protective devices - Methods of test - Part 5: CI i mat ic conditions Appareils de protection respiratoire - Mthodes dessai - Partie 5: Conditions climatiques Atemschutzgerte - Prfverfahren - Teil 5: Klimabedingungen 0 This European Standard was approved by CEN on 16 March 2

9、001. CEN members are bound to comply with the CENICENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained

10、 on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre

11、has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMM

12、ITTEE FOR STANDARDIZATION COMITE EUROPEEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels O 2001 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13274-52001 E Page 2 EN 13274-5

13、:2001 Contents Page Foreword . 3 Introduction 4 1 Scope . 4 2 Normative references . 4 3 Terms and definitions . 4 4 Prerequisites . 4 5 General test requirements . 5 6 Procedure 5 6.1 General . 5 6.2 Temperature 5 6.4 Duration of exposure . 6 Annex ZA (informative) Clauses of this European Standard

14、 addressing essential requirements or other provision of EU Directives 7 6.3 Relative humidity . 5 O BSI 06-2001 Page 3 EN 13274-512001 Foreword This European Standard has been prepared by Technical Committee CENiTC 79, Respiratory protective devices, the Secretariat of which is held by DIN. This Eu

15、ropean Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2001, and conflicting national standards shall be withdrawn at the latest by October 2001. This European Standard has been prepared under a mandate

16、 given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this standard. EN 13274-5 is one of several parts, which are as foll

17、ows: Part 1: Determination of inward leakage and total inward leakage; Part 2: Practical performance tests; o Part 3: Determination of breathing resistance; Part 4: Flame tests; Part 5: Climatic conditions; Part 6: Determination of carbon dioxide content of inhalation air; Part 7: Determination of p

18、article filter penetration; Part 8: Determination of dolomite dust clogging of particle filters. According to the CENKENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark,

19、 Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. o O BSI 06-2001 Page 4 EN 13274-512001 Introduction This standard is intended as a supplement to the specific device standards for respiratory pro

20、tective devices. Climatic conditions are specified for complete or pa - number of specimens; - selection of conditioning phases; - sequence of conditioning phases, where more than one is required; - specification of any observations to be carried out; - orientation and position of specimen during co

21、nditioning; - condition of specimen, e.g. packaged, sealed, fully assembled. e O BSI 06-2001 Page 5 EN 13274-5:2001 5 General test requirements O Unless otherwise specified, the values stated in this European Standard are expressed as nominal values. Except for temperature limits, values which are n

22、ot stated as maxima or minima shall be subject to a tolerance Of I5 %. Unless otherwise specified, the ambient temperature for testing shall be between 16 OC and 32 OC and the temperature limits shall be subject to an accuracy of Il OC. 6 Procedure 6.1 General In order to ensure that there is no the

23、rmal shock during the conditioning of the specimens, the temperature gradient shall be less than 2 “C/min between phases at different temperatures, or between the beginning and the end of a thermal cycle. A phase for climatic conditioning shall be composed of the three parameters: temperature, relat

24、ive humidity and duration, that is one of each of those given in 6.2 to 6.4. For example: (30 f 3) OC, wet atmosphere, (24 f 1) h. A cycle may consist of one or more phases. Each specimen shall be placed in the conditioning environment such that air is free to circulate around it, and such that no c

25、omponent of the specimen has its weight supported by another, unless specifically intended by the manufacturer. Separate specimens shall not be touching. 6.2 Temperature The temperatures used for climatic conditioning shall be chosen from the following. 6.2.1 Manufacturers highest recommended temper

26、ature. 6.2.2 (70 f 3) “C. 6.2.3 (60 f 3) OC. 6.2.4 (30 f 3) OC. 6.2.5 Ambient temperature 16 OC to 32 OC. 6.2.6 (-6 f 3) OC. a 6.2.7 (-15 I 3) OC. 6.2.8 (-30 f 3) OC. 6.2.9 Manufacturers lowest recommended temperature. 6.3 Relative humidity The relative humidities for climatic conditioning shall be

27、chosen from the following. 6.3.1 Manufacturers highest recommended relative humidity. 6.3.2 Wet atmosphere (see 3.3). 6.3.3 Ambient conditions (see 3.1). 6.3.4 Dry atmosphere (see 3.2). O BSI 06-2001 Page 6 EN 13274-5:2001 6.4 Duration of exposure The durations of exposure for climatic conditioning

28、shall be chosen from the following. 6.4.1 (72 f 3) h. 6.4.2 (24 f 1) h. 6.4.3 (17 i: 3) h. 6.4.4 2 12 h. 6.4.5 (10 f 6) h. 6.4.6 24 h. 6.4.7 (3 f 1) h. e O BSI 06-2001 Page 7 EN 13274-52001 Annex ZA (informative) Clauses of this European Standard addressing essential requirements or other provision

29、of EU Directives This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association and supports essential requirements of EU Directive 89/686/EEC. WARNING Other requirements and other EU Directives may be applicable to the produc

30、t(s) falling within the scope of this standard. The clauses of this standard are likely to support requirements in Clauses 1.3.2 and 3.10.1 of Annex II of Directive 89/686/EEC. Compliance with this standard provides one means of conforming with the specific essential requirements of the Directive co

31、ncerned and associated EFTA regulations. O BSI 06-2001 BS EN 1 3 2 74-5 : 2 O O 1 BSI 389 Chiswick High Road London w4 4AL BSI - British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the .

32、nternational level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or iditions. t is the constant aim of BSI to improve the quality of our products and services

33、. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Fel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individ

34、ual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. Standards ar

35、e also available from the BSI website at htto:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of info

36、rmation on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020

37、8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Further information about BSI

38、 is available on the BSI website at htto:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be

39、reproduced, stored in a retrieval system or transmitted in any form or by any means - electronic, photocopying, recording or otherwise - without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, a

40、nd size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.