EN 13241-2003 en Industrial commercial garage doors and gates - Product standard performance characteristics (Incorporates Amendment A2 2016).pdf

《EN 13241-2003 en Industrial commercial garage doors and gates - Product standard performance characteristics (Incorporates Amendment A2 2016).pdf》由会员分享，可在线阅读，更多相关《EN 13241-2003 en Industrial commercial garage doors and gates - Product standard performance characteristics (Incorporates Amendment A2 2016).pdf（32页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 13241:2003g44g81g70g82g85g83g82g85g68g87g76g81g74g3Industrial, commercial, garage doors and gates Product standard, performanceICS 91.090g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44

2、g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58+A2:2016Jg88g79y 2003g70g82g85g85g76g74g72g81g71g88g80g3characteristicsBS EN 13241:2003 Incorporating corrigenda July 2003 and February 2017BS EN 13241:2003+A2:2016ISBN 978 0 580 96275 2Amendments/corrigenda issued since publicationAmd. No.

3、 Date Comments14656 Incorporating corrigendum No. 112 September 2003 Correction to 4.3.731 July 2011 Implementation of CEN amendment A1:201131 October 2016 Implementation of CEN amendment A2:2016. This also renumbers BS EN 13241-1:2003+A1:2011 as BS EN 13241:2003+A2:201628 February 2017 Identifiers

4、in Amendments/corrigenda table correctedThis British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 July 2003 The British Standards Institution 2017. Published by BSI Standards Limited 2017National forewordThis British Standard is the UK implementatio

5、n of EN 13241:2003+A2:2016, incorporating corrigendum July 2003. It supersedes BS EN 13241-1:2003+A1:2011, which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. F

6、or example, text altered by CEN amendment A1 is indicated by g1g2.The UK participation in its preparation was entrusted by Technical Committee B/538, Doors, windows, shutters, hardware and curtain walling, to Subcommittee B/538/5, Industrial and commercial garage doors and gates. A list of organizat

7、ions represented on this subcommittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligation

8、s.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13241:2003+A2 September 2016 ICS 91.090 Supersedes EN 13241-1:2003+A1:2011 English Version Industrial, commercial, garage doors and gates - Product standard, performance characteristics Portes et portails industriels, commerciaux et de garage -

9、Norme de produit, caractristiques de performance Tore - Produktnorm, Leistungseigenschaften This European Standard was approved by CEN on 12 June 2003 and includes Amendment 1 approved by CEN on 22 February 2011 and Amendment 2 approved by CEN on 11 July 2016. CEN members are bound to comply with th

10、e CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Managemen

11、t Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status

12、as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, N

13、etherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All

14、 rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13241:2003+A2:2016 E#EN 13241:2003+A2:2016$ (E) 2 Contents Page European foreword 4 Introduction . 5 1 #Scope$ 6 1.1 General . 6 1.2 Exclusions . 6 1.3 Specific applications . 7 2 Normative

15、references . 7 3 Terms and definitions 8 4 Requirements 8 4.1 General . 8 4.2 Mechanical aspects 9 4.2.1 General . 9 4.2.2 Force for manual operation 9 4.2.3 Mechanical resistance 9 4.2.4 Mechanical durability . 9 4.2.5 Geometry of glazing/glass components . 9 4.2.6 Protection against cutting 10 4.2

16、.7 Protection against tripping . 10 4.2.8 Safe openings 10 4.2.9 Release of dangerous substances 10 4.3 Power operation 10 4.3.1 General 10 4.3.2 Protection against crushing, shearing and drawing-in . 10 4.3.3 Operating forces 11 4.3.4 Electrical safety 11 4.3.5 Electromagnetic compatibility (EMC) 1

17、1 4.3.6 Alternative requirements 12 4.3.7 Upgrading of manually operated doors 12 4.4 Additional requirements for specific performance characteristics . 13 4.4.1 General 13 4.4.2 Water tightness 13 4.4.3 Resistance to wind load 13 4.4.4 Noise 14 4.4.5 Thermal resistance . 14 4.4.6 Air permeability 1

18、4 4.4.7 Durability of the performance characteristics . 14 4.5 Instructions for installation, operation and maintenance . 14 5 Marking and labelling 14 6 Evaluation of conformity 15 6.1 General 15 6.2 Initial type test . 15 6.3 Test on site . 16 6.4 Production control 16 Annex A (informative) Form f

19、or designation and classification of performances . 17 BS EN 13241:2003+A2:2016#EN 13241:2003+A2:2016$ (E) 3 Annex B (normative) Procedure for the determination of values for thermal resistance 18 B.1 Introduction 18 B.2 Procedure . 18 Annex C (informative) Safety factors to be considered in door de

20、sign in respect of their resistance to wind load 20 Annex ZA (informative) Relationship of this European Standard with the Construction Products Directive 21 Annex ZB (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“ . 26 Annex ZC (

21、informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2004/108/EC“ 27 Bibliography 28 BS EN 13241:2003+A2:2016#EN 13241:2003+A2:2016$ (E) 4 European foreword This document (#EN 13241:2003+A2:2016$) has been prepared by Technical Committee CEN/TC 33

22、“Doors, windows, shutters, building hardware and curtain walling“, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2017, and conflicting national s

23、tandards shall be withdrawn at the latest by June 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document includes Amendme

24、nt 1, approved by CEN on 2011-02-22 and Amendment 2, approved by CEN on 2016-07-11. This document supersedes #EN 13241-1:2003+A1:2011$. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“ and #$. This document has been prepared under a mandate given to

25、 CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annexes ZA, ZB and ZC, which are integral parts of this document. !Annex ZB is revised taking into account the “new”

26、 Machinery Directive.“ Annexes A and C are informative. Annex B is normative. This document includes a Bibliography. #deleted text$ #The main changes introduced by the 2ndAmendment to this new edition of the present text concern the title and the scope according to the ECs request and the CEN/TC 33

27、decisions D1010 (April 2014), D1074 and D1089 (April 2015).$ According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia

28、, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13241:2003+A2:2016#E

29、N 13241:2003+A2:2016$ (E) 5 Introduction With the aim of clarifying the intentions of this European Standard and avoiding doubts when reading it, the following assumptions were made when producing it: a) components without specific requirements are: designed in accordance with the usual engineering

30、practice and calculation codes, including all failure modes; of sound mechanical and electrical construction; made of materials with adequate strength and of suitable quality; general electrical hazards are dealt with according to electrical safety standards such as EN 602041. b) components are kept

31、 in good repair and working order, so that the required characteristics remain during the economical working life despite wear; c) with the exception of the items listed below, a mechanical device is built according to good practice and the requirements of this European Standard: negotiations occur

32、between the manufacturer and the purchaser concerning particular conditions for the use and places of use for the door related to health and safety; the place of use/installation to be adequately lit; the place of use/installation to allow safe use of the door. These assumptions do not restrict the

33、need for adequate information for use in this European Standard. BS EN 13241:2003+A2:2016#EN 13241:2003+A2:2016$ (E) 6 1 #Scope 1.1 General This European Standard specifies the safety and performance requirements, except resistance to fire and smoke control characteristics, for industrial, commercia

34、l, garage doors and gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises. Fire resisting and/or smoke contr

35、ol characteristics for industrial, commercial, garage doors and gates are covered by EN 16034. This European Standard also covers commercial doors such as rolling shutters and rolling grilles used in retail premises which are mainly provided for the access of persons rather than vehicles or goods. T

36、hese doors can include pass doors incorporated in the door leaf which are also covered by this European Standard. These devices can be manually or power operated. This European Standard does not cover operation in environments where the electromagnetic disturbances are outside the range of those spe

37、cified in EN 61000-6-3. 1.2 Exclusions This European Standard does not apply to the following which are intended for a different use: lock gates and dock gates; doors on lifts; doors on vehicles; armoured doors; doors mainly for the retention of animals; theatre textile curtains; horizontally moving

38、 power operated doors mainly intended for pedestrian use in accordance with EN 16361; revolving doors of any size; railway barriers; barriers used solely for vehicles. This European Standard does not cover the radio part of doors. If a radio operating device is used, the relevant ETSI standards shou

39、ld be applied in addition. This European Standard does not contain any specific requirement for doors which are moving because of energy stored by dedicated means from human power such as manually tensioned springs. This European Standard does not contain any specific requirements for doors on escap

40、e routes. The ability to open the door leaf safely and easily cannot normally be achieved by industrial, commercial and garage doors due to size, weight and/or mode of operation. BS EN 13241:2003+A2:2016#EN 13241:2003+A2:2016$ (E) 7 The noise emission of powered doors and gates is not considered to

41、be a relevant hazard. Therefore this European Standard does not contain any specific requirements on noise in relation to the Machinery Directive. 1.3 Specific applications This European Standard should also apply to power operated doors which have been created by the addition of power operation to

42、an installed manual door in respect of the relevant requirements. Annex ZA does not apply to this kind of door. It also identifies requirements and classes of performance for additional characteristics considered to be of importance to the trade. When a door is part of the load carrying structure of

43、 the building the requirements of this European Standard can apply on a voluntary basis in addition to the requirements for the load carrying structure, which are not dealt with in this European Standard. Annex ZA does not apply for this kind of doors.$ 2 Normative references #The following document

44、s, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.$ EN 418, Safety of machinery

45、Emergency stop equipment, functional aspects Principles for design EN 1037, Safety of machinery Prevention of unexpected start-up ENV 1991-2-4, Eurocode 1: Basis of design and actions on structures Part 2-4 : Actions on structures Wind actions EN 12424:2000, Industrial, commercial and garage doors a

46、nd gates Resistance to wind load Classification EN 12425, Industrial, commercial and garage doors and gates Resistance to water penetration Classification EN 12426, Industrial, commercial and garage doors and gates Air permeability Classification EN 12427, Industrial, commercial and garage doors and

47、 gates Air permeability Test method EN 12428, Industrial, commercial and garage doors and gates Thermal transmittance Requirements for the calculation EN 12433-1, Industrial, commercial and garage doors and gates Terminology Part 1: Types of doors EN 12433-2, Industrial, commercial and garage doors

48、and gates Terminology Part 2: Parts of doors EN 12444, Industrial, commercial and garage doors and gates Resistance to wind load Testing and calculation EN 12445:2000, Industrial, commercial and garage doors and gates Safety in use of power operated doors Test methods EN 12453:2000, Industrial, comm

49、ercial and garage doors and gates Safety in use of power operated doors Requirements BS EN 13241:2003+A2:2016#EN 13241:2003+A2:2016$ (E) 8 EN 12489, Industrial, commercial and garage doors and gates Resistance to water penetration Test method EN 12604:2000, Industrial, commercial and garage doors and gates Mechanical aspects Requirements EN 12605:2000, Industrial, commercial and garage doors and gates Mechanical aspects Test methods EN 12635:2002, Industrial, commercial and garage d