EN 13165-2012 en Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - Specification (Incorporates Amendment A2 2016)《建筑保温产品 工厂生产硬质聚氨酯泡沫(.pdf

《EN 13165-2012 en Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - Specification (Incorporates Amendment A2 2016)《建筑保温产品 工厂生产硬质聚氨酯泡沫(.pdf》由会员分享，可在线阅读，更多相关《EN 13165-2012 en Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - Specification (Incorporates Amendment A2 2016)《建筑保温产品 工厂生产硬质聚氨酯泡沫(.pdf（58页珍藏版）》请在麦多课文档分享上搜索。

1、Thermal insulation productsfor buildings Factory maderigid polyurethane foam (PU)products SpecificationBS EN 13165:2012+A2:2016BSI Standards PublicationBS EN 13165:2012+A2:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 13165:2012+A2:2016. It supersedes BS

2、EN 13165:2012+A1:2015, which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by g1g2.The UK participati

3、on in its preparation was entrusted to Technical Committee B/540, Energy performance of materials components and buildings.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a

4、contract. Users are responsible for its correct application. The British Standards Institution 2016. Published by BSI Standards Limited 2016ISBN 978 0 580 91258 0ICS 91.100.60Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under th

5、e authority of the Standards Policy and Strategy Committee on 28 February 2013.Amendments/corrigenda issued since publicationDate Text affected31 March 2015 Implementation of CEN amendment A1:201530 June 2016 Implementation of CEN amendment A2:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN

6、 13165:2012+A2 June 2016 ICS 91.100.60 Supersedes EN 13165:2012+A1:2015 English Version Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - Specification Produits isolants thermiques pour le btiment - Produits manufacturs en mousse rigide de polyurthane (

7、PU) - Spcification Wrmedmmstoffe fr Gebude - Werkmig hergestellte Produkte aus Polyurethan-Hartschaum (PU) - Spezifikation This European Standard was approved by CEN on 6 October 2012 and includes Amendment 1 approved by CEN on 15 December 2014 and Amendment 2 approved by CEN on 23 February 2016. CE

8、N members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on app

9、lication to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC M

10、anagement Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, La

11、tvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Ma

12、rnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13165:2012+A2:2016 EEN 13165:2012+A2:2016 (E) 2 Contents Page European foreword 4 1 Scope 7 2 Normative references 7 3 Terms, definitions, symbols, units

13、 and abbreviated terms . 8 4 Requirements . 12 5 Test methods 18 6 Designation code . 21 7 Assessment and Verification of the Constancy of Performance (AVCP) . 21 8 Marking and labelling . 22 Annex A (normative) Determination of the declared values of thermal resistance and thermal conductivity . 24

14、 A.1 General 24 A.2 Input data. 24 A.3 Declared values . 24 Annex B (normative) !Product type determination“ (!PTD“) and factory production control (FPC) . 26 Annex C (normative) Determination of the aged values of thermal resistance and thermal conductivity 30 C.1 General 30 C.2 Sampling and test s

15、pecimen preparation 30 C.3 Determination of the initial value of thermal conductivity . 31 C.4 Determination of the accelerated aged value of thermal conductivity . 32 C.5 Fixed increment procedure . 35 C.6 Declaration of the aged values of thermal resistance and thermal conductivity 37 Annex D (nor

16、mative) PU multi-layered insulation products . 39 D.1 General 39 D.2 Requirements . 39 D.3 Test methods 40 D.4 Evaluation of conformity 40 Annex E (informative) Additional properties 41 E.1 General 41 E.2 Bending strength . 41 E.3 Shear behaviour 41 E.4 Compressive stress at 2% deformation 41 E.5 Lo

17、ng term water absorption by diffusion 41 E.6 Freeze-thaw resistance . 41 E.7 Apparent density . 42 Annex ZA (informative) !Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation“ . 43 Bibliography . 54 BS EN 13165:2012+A2:2016g8g17g3g883g885g883g888g88

18、7g483g884g882g883g884g938g4g884g483g884g882g883g888g3g525g8g5262EN 13165:2012+A2:2016 (E) 3 Tables Table 1 Tolerances on length and width . 13 Table 2 Classes for thickness tolerances . 13 Table 3 Deviation from flatness 13 Table 4 Test conditions for dimensional stability under specified temperatur

19、e and humidity conditions . 14 Table 5 Levels for dimensional stability for test conditions 1, 2, 3 . 15 Table 6 Levels for dimensional stability for test condition 4 15 Table 7 Levels for deformation under specified compressive load and temperature conditions 15 Table 8 Levels for compressive stres

20、s or compressive strength 16 Table 9 Levels for tensile strength perpendicular to faces 16 Table 10 Levels for one sided wetting behaviour 17 Table 11 Test methods, test specimens and conditions 20 Table A.1 Values for k for one sided 90 % tolerance interval with a confidence level of 90 % . 25 Tabl

21、e B.1 Minimum number of tests for !PTD“ and minimum product testing frequencies 26 Table B.2 Minimum product testing frequencies for the reaction to fire characteristics . 28 Table C.1 #Safety increments to be added to the measured accelerated aged value of thermal conductivity$ . 33 Table C.2 #Incr

22、ements for calculating the aged value of thermal conductivity$ 37 Table E.1 Test methods, test specimens, conditions and minimum testing frequencies 42 Table ZA.1 Relevant clauses for factory made rigid polyurethane foam and intended use . 44 Table ZA.2 Systems of AVCP . 45 Table ZA.3.1 Assignment o

23、f AVCP tasks for factory made rigid polyurethane foam products under system 1 for reaction to fire and system 3 (see Table ZA.2) . 46 Table ZA.3.2 Assignment of AVCP tasks for factory made rigid polyurethane foam products under system 3 (see Table ZA.2) 47 Table ZA.3.3 Assignment of AVCP tasks for f

24、actory made rigid polyurethane foam products under combined system 4 for reaction to fire and system 3 (see Table ZA.2). 47 Figures Figure C.1 Flow chart of the alternative ageing procedures 31 Figure C.2 Illustration of the acceleration test 34 Figure ZA.1 !Example CE marking information of product

25、s under AVCP system 1 and system 3“ . 53 BS EN 13165:2012+A2:2016g8g17g3g883g885g883g888g887g483g884g882g883g884g938g4g884g483g884g882g883g888g3g525g8g5263EN 13165:2012+A2:2016 (E) 4 European foreword This document (EN 13165:2012+A2:2016) has been prepared by Technical Committee CEN/TC 88 “Thermal i

26、nsulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2016, and conflicting national standards shall be withdrawn at

27、the latest by March 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on 2014-

28、12-15, and Amendment 2, approved by CEN on 2016-02-23. This document supersedes #EN 13165:2012+A1:2015$. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“ and #$. This document has been prepared under a mandate given to CEN by the European Commission

29、 and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Construction Products Regulation (CPR), see informative Annex ZA, which is an integral part of this standard.“ Compared with EN 13165:2008, the main changes are: a) better harm

30、onisation between the different standards of the package (EN 13162 to EN 13171) on definitions, requirements, classes and levels; b) new normative annex on multi-layered products; c) changes on some editorial and technical content and addition of information on some specific items for PU products su

31、ch as: PU product term, dimensional stability, point load (cancelled), water absorption, water vapour transmission; d) addition of links to EN 15715, Thermal insulation products Instructions for mounting and fixing for reaction to fire testing Factory made products; e) changes to the Annex ZA. !Amen

32、dment 1 modifies EN 13165:2012 identifying those clauses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulation (CPR). This amendment introduces: f) an addition to the foreword; g) an addition in 3.2; h) a new subclause 4.3.11; BS EN 13

33、165:2012+A2:2016g8g17g3g883g885g883g888g887g483g884g882g883g884g938g4g884g483g884g882g883g888g3g525g8g5264EN 13165:2012+A2:2016 (E) 5 i) modification of Clause 7; j) modification of Clause 8; k) modification of Annex B; l) a new Annex ZA.“ #Compared with EN 13165:2012+A1:2015 the main changes are: d

34、etermination of the aged values of thermal resistance and thermal conductivity (acceleration factor); new blowing agent.$ This standard is one of a series of standards for thermal insulation products used in buildings, but this standard may be used in other areas where appropriate. In pursuance of R

35、esolution BT 20/1993 Revised, CEN/TC 88 has proposed defining the standards listed below as a package of documents. The package of standards comprises the following group of interrelated standards for the specifications of factory made thermal insulation products, all of which come within the scope

36、of CEN/TC 88: EN 13162, Thermal insulation products for buildings Factory made mineral wool (MW) products Specification EN 13163, Thermal insulation products for buildings Factory made expanded polystyrene (EPS) products Specification EN 13164, Thermal insulation products for buildings Factory made

37、extruded polystyrene foam (XPS) products Specification EN 13165, Thermal insulation products for buildings Factory made rigid polyurethane foam (PU) products Specification EN 13166, Thermal insulation products for buildings Factory made phenolic foam (PF) products Specification EN 13167, Thermal ins

38、ulation products for buildings Factory made cellular glass (CG) products Specification EN 13168, Thermal insulation products for buildings Factory made wood wool (WW) products Specification EN 13169, Thermal insulation products for buildings Factory made expanded perlite board (EPB) products Specifi

39、cation EN 13170, Thermal insulation products for buildings Factory made products of expanded cork (ICB) Specification EN 13171, Thermal insulation products for buildings Factory made wood fibre (WF) products Specification The reduction in energy used and emissions produced during the installed life

40、of insulation products exceeds by far the energy used and emissions made during the production and disposal processes. BS EN 13165:2012+A2:2016g8g17g3g883g885g883g888g887g483g884g882g883g884g938g4g884g483g884g882g883g888g3g525g8g5265EN 13165:2012+A2:2016 (E) 6 According to the CEN/CENELEC Internal R

41、egulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland

42、, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13165:2012+A2:2016g8g17g3g883g885g883g888g887g483g884g882g883g884g938g4g884g483g884g882g883g888g3g525g8g5266EN 13165:201

43、2+A2:2016 (E) 7 1 Scope This European Standard specifies the requirements for factory made rigid polyurethane foam (PU) products, with or without facings or coatings, which are used for the thermal insulation of buildings. PU includes both PIR and PUR products. The products are manufactured in the f

44、orm of boards. !This European Standard includes PU multi-layered insulation products, see Annex D.“ Products covered by this standard are also used in prefabricated thermal insulation systems and !composite insulation products“; the performance of systems incorporating these products is not covered.

45、 This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. This standard does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The

46、 levels required for a given application are to be found in regulations or non-conflicting standards. Products with a declared thermal resistance lower than 0,25 m2g1668K/W or a declared thermal conductivity greater than 0,060 W/(mg1668K) at 10 C are not covered by this European Standard. This stand

47、ard does not cover in situ insulation products and products intended to be used for the insulation of building equipment and industrial installations (covered by EN 14308). 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indisp

48、ensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 822, Thermal insulating products for building applications Determination of length and width EN 823, Thermal

49、 insulating products for building applications Determination of thickness EN 824, Thermal insulating products for building applications Determination of squareness EN 825, Thermal insulating products for building applications Determination of flatness EN 826, Thermal insulating products for building applications Determination of compression behaviour EN 1604, Thermal insulating products for building applications Determination of dimensional stability under spe