EN 13146-6-2012 en Railway applications - Track - Test methods for fastening systems - Part 6 Effect of severe environmental conditions《铁路应用 轨道 紧固系统的试验方法 第6部分 恶劣环境条件的影响》.pdf

《EN 13146-6-2012 en Railway applications - Track - Test methods for fastening systems - Part 6 Effect of severe environmental conditions《铁路应用 轨道 紧固系统的试验方法 第6部分 恶劣环境条件的影响》.pdf》由会员分享，可在线阅读，更多相关《EN 13146-6-2012 en Railway applications - Track - Test methods for fastening systems - Part 6 Effect of severe environmental conditions《铁路应用 轨道 紧固系统的试验方法 第6部分 恶劣环境条件的影响》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 13146-6:2012Railway applications Track Test methods for fasteningsystemsPart 6: Effect of severe environmentalconditionsBS EN 13146-6:2012 BRITISH STANDARDNational foreword

2、This British Standard is the UK implementation of EN 13146-6:2012.It supersedes BS EN 13146-6:2002 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee RAE/2, Railway Applications - Track.A list of organizations represented on this committee can beobtained o

3、n request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012. Published by BSI StandardsLimited 2012ISBN 978 0 580 68151 6ICS 45.080Compliance with a British

4、 Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 April 2012.Amendments issued since publicationDate Text affectedBS EN 13146-6:2012EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13

5、146-6 April 2012 ICS 93.100 Supersedes EN 13146-6:2002English Version Railway applications - Track - Test methods for fastening systems - Part 6: Effect of severe environmental conditions Applications ferroviaires - Voie - Mthodes dessai pour les systmes de fixation - Partie 6: Effet rsultant de con

6、ditions environnantes rigoureuses Bahnanwendungen - Oberbau - Prfverfahren fr Schienenbefestigungssysteme - Teil 6: Auswirkung von extremen Umwelteinflssen This European Standard was approved by CEN on 26 November 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which

7、stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This Europ

8、ean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are

9、 the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden

10、, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Mem

11、bers. Ref. No. EN 13146-6:2012: EBS EN 13146-6:2012EN 13146-6:2012 (E) 2 Contents Page Foreword 31 Scope. 52 Normative references 5 3 Terms and definitions 54 Principle 55 Apparatus . 55.1 Salt spray equipment . 55.2 Tools 56 Test specimens 57 Procedure . 68 Test report 6BS EN 13146-6:2012EN 13146-6

12、:2012 (E) 3 Foreword This document (EN 13146-6:2012) has been prepared by Technical Committee CEN/TC 256 “Railway applications”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsem

13、ent, at the latest by October 2012, and conflicting national standards shall be withdrawn at the latest by October 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identify

14、ing any or all such patent rights. This document supersedes EN 13146-6:2002. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. In this revision of EN 13146-6:2002 the scope has been enlarged to include embedded rail with

15、mechanical fastenings. This European Standard is one of the series EN 13146 “Railway applications Track Test methods for fastening systems“ which consists of the following parts: Part 1: Determination of longitudinal rail restraint; Part 2: Determination of torsional resistance; Part 3: Determinatio

16、n of attenuation of impact loads; Part 4: Effect of repeated loading; Part 5: Determination of electrical resistance; Part 6: Effect of severe environmental conditions; Part 7: Determination of clamping force; Part 8: In service testing; Part 9: Determination of stiffness. These support the requirem

17、ents in the series EN 13481 “Railway applications Track Performance requirements for fastening systems“. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croat

18、ia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13146-6:2012EN

19、13146-6:2012 (E) 4 Introduction This part of EN 13146 includes the only test procedure to find the effect of severe environmental conditions which is generally available at present. BS EN 13146-6:2012EN 13146-6:2012 (E) 5 1 Scope This European Standard specifies a laboratory test procedure for findi

20、ng the effect of exposure to severe environmental conditions on the fastening system. This test procedure applies to a complete fastening assembly including embedded rail with mechanical fastenings. It is not applicable to embedded rail systems relying on adhesive components to secure the rail. 2 No

21、rmative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendment

22、s) applies. EN 13481-1:2012, Railway applications Track Performance requirements for fastening systems Part 1: Definitions EN ISO 9227, Corrosion tests in artificial atmospheres Salt spray tests (ISO 9227) 3 Terms and definitions For the purposes of this document, the terms and definitions given in

23、EN 13481-1:2012 apply. 4 Principle The complete fastening assembly is exposed to a salt spray and the effect on ease of dismantling, and reassembly, and condition of individual components is recorded. 5 Apparatus 5.1 Salt spray equipment This shall conform with EN ISO 9227 for the NSS (neutral salt

24、spray) test. 5.2 Tools Manually operated tools normally used for installing and removing the clamping device from the fastening assembly. 6 Test specimens Each specimen shall consist of a complete fastening assembly with a baseplate or a section of sleeper, bearer or element of slab track where no b

25、aseplate is used. This shall include a short length of rail of the section for which the fastening is designed. For fastening assemblies for embedded rail, the length of the test specimen shall be equal to the nominal sleeper spacing in EN 13481-1:2012, 3.1. BS EN 13146-6:2012EN 13146-6:2012 (E) 6 7

26、 Procedure Visually examine and record the condition of each component. Then fit the rail to the section of sleeper or baseplate using the fastening components as they are to be assembled in track. Subject to the neutral salt spray in accordance with EN ISO 9227 for 300 h. Remove the clamping device

27、 using the tools provided; visually examine all the components and record their condition. Then reassemble the fastening system using the tools provided. Record any failure to dismantle or reassemble the fastening with the tools provided. 8 Test report The test report shall include at least the foll

28、owing information: a) number, date of issue and title of this European Standard; b) name and address of laboratory performing the test; c) date test performed; d) name, designation and description of fastening assembly, including individual components, tested; e) origin of test specimens; f) support

29、 used for assembly; g) rail section used in test; h) tools provided to assemble and dismantle the assembly; i) change in appearance (if any) of each component during test; j) any failure to dismantle or re-assemble the fastening assembly with the tools provided. This page deliberately left blankBSI

30、is the independent national body responsible for preparing British Standards and other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. BSI is incorporated by Royal Charter. British Standards and other standardis

31、ation products are published by BSI Standards Limited.British Standards Institution (BSI)raising standards worldwideBSI389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards and PASs are periodically updated by amendment or revision. Users of British Standards an

32、d PASs should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using British Standards would inform the Secretary of the technical c

33、ommittee responsible, the identity of which can be found on the inside frontcover. Similary for PASs, please notify BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers BSI Subscribing Members an individual updating service called PLUS which ensures that subscribers auto

34、matically receive the latest editions of British Standards and PASs.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders for BSI, international and

35、 foreign standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, BSI will supply the British Standard implementation of the relevant international standard, unless otherwise requested.I

36、nformation on standardsBSI provides a wide range of information on national, Europeanand international standards through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: BSI Subscribing Members are kept up to date with standards developments and receive substantial discou

37、nts on the purchase priceof standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards and PASs via British Standards Online can be found at information abou

38、t British Standards is available on the BSI website at www.bsi- the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that own copyright in the information used (such as the international

39、standardisation bodies) has formally licensed such information to BSI for commerical publication and use. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopyi

40、ng, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Department.Tel: +44 (0)20 8996 7070Email: