EN 13108-20-2016 en Bituminous mixtures - Material specifications - Part 20 Type Testing《沥青混合物-材料规范-第20部分 型式试验》.pdf

《EN 13108-20-2016 en Bituminous mixtures - Material specifications - Part 20 Type Testing《沥青混合物-材料规范-第20部分 型式试验》.pdf》由会员分享，可在线阅读，更多相关《EN 13108-20-2016 en Bituminous mixtures - Material specifications - Part 20 Type Testing《沥青混合物-材料规范-第20部分 型式试验》.pdf（36页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN 13108-20:2016Bituminous mixtures Material specificationsPart 20: Type TestingBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 13108-20:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 13108-20:2016.It supersedes BS

2、 EN 13108-20:2006 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee B/510/1, Asphalt products.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessarypr

3、ovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2016. Published by BSI StandardsLimited 2016ISBN 978 0 580 82052 6ICS 93.080.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was publish

4、ed under the authority of theStandards Policy and Strategy Committee on 30 June 2016.Amendments issued since publicationDate Text affectedBS EN 13108-20:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13108-20 June 2016 ICS 93.080.20 Supersedes EN 13108-20:2006English Version Bituminous mix

5、tures - Material specifications - Part 20: Type Testing Mlanges bitumineux - Spcifications pour le matriau - Partie 20: preuve de formulation Asphaltmischgut - Mischgutanforderungen - Teil 20: Typprfung This European Standard was approved by CEN on 27 February 2016. CEN members are bound to comply w

6、ith the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Man

7、agement Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same s

8、tatus as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Ma

9、lta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 C

10、EN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13108-20:2016 EBS EN 13108-20:2016EN 13108-20:2016 (E) 2 Contents Page European foreword . 4 Introduction 6 1 Scope 7 2 Normative references 7 3 Terms and definitions 10 4 Requirements

11、 for Type Testing 10 4.1 General . 10 4.2 Validity . 11 4.2.1 Period of validity 11 4.2.2 Changes in aggregate 11 4.2.3 Change in bitumen . 11 4.2.4 Change in Reclaimed Asphalt . 12 4.2.5 Change in additive 12 5 Constituent materials . 12 6 Bituminous Mixtures 12 6.1 General . 12 6.2 Application . 1

12、2 6.3 Sampling and testing . 13 6.4 Composition . 13 6.5 Specimen preparation 13 6.5.1 General . 13 6.5.2 Laboratory validation . 13 6.5.3 Production validation . 13 7 Type Test Report 14 7.1 General . 14 7.2 Constituents . 14 7.3 Mix formulation 14 7.4 Temperatures 15 7.5 Test results . 15 Annex A

13、(normative) Properties and test methods for constituent materials . 16 Annex B (normative) Summary of properties and test methods for bituminous mixtures . 17 B.1 Asphalt Concrete (EN 13108-1) 17 B.2 Asphalt Concrete for Very Thin Layers, BBTM (EN 13108-2) 18 B.3 Soft Asphalt (EN 13108-3) . 19 B.4 H

14、ot Rolled Asphalt (EN 13108-4) . 19 B.5 Stone Mastic Asphalt (EN 13108-5) . 20 B.6 Mastic asphalt (EN 13108-6) 21 B.7 Porous Asphalt (EN 13108-7) 21 B.8 Asphalt for Ultra-Thin Layers, AUTL (EN 13108-9) . 22 Annex C (normative) Methods of specimen preparation 23 C.1 General . 23 BS EN 13108-20:2016EN

15、 13108-20:2016 (E) 3 C.2 Compaction energy 23 C.3 Reference density . 23 C.4 Compaction degree 24 C.5 Void content 24 Annex D (normative) Test procedures and conditions 26 D.1 Test procedures and conditions 26 D.2 Bulk density, maximum density, void content, voids filled with bitumen and voids in mi

16、neral aggregate . 26 D.3 Water sensitivity . 26 D.4 Resistance to abrasion by studded tyres . 26 D.5 Bitumen aggregate affinity for application of porous asphalt on airfields 26 D.6 Resistance to permanent deformation by wheel-tracking test . 27 D.7 Resistance to permanent deformation by tri-axial c

17、ompression test . 27 D.8 Stiffness 28 D.9 Fatigue 29 D.10 Marshall test for application on airfields . 29 D.11 Resistance to fuel for application on airfields 29 D.12 Resistance to de-icing fluid for application on airfields . 29 D.13 Binder drainage. 29 D.14 Indentation and resistance to permanent

18、deformation of mastic asphalt 29 D.15 Permeability . 30 D.16 Particle loss of porous asphalt . 30 D.17 Mixture SATS Durability index 30 D.18 Low temperature properties 30 D.19 Fracture toughness (potential for crack propagation) . 30 D.20 Friction after polishing (FAP) 31 Annex E (informative) Speci

19、al requirements for airfields . 32 BS EN 13108-20:2016EN 13108-20:2016 (E) 4 European foreword This document (EN 13108-20:2016) has been prepared by Technical Committee CEN/TC 227 “Road materials”, the secretariat of which is held by DIN. This European Standard shall be given the status of a nationa

20、l standard, either by publication of an identical text or by endorsement, at the latest by December 2016, and conflicting national standards shall be withdrawn at the latest by March 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent r

21、ights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13108-20:2006. Compared with EN 13108-20:2006, the following changes have been made: a) update to align with other parts of EN 13108 series, test methods and CPR require

22、ments; b) enhanced guidance on period of validity of Type Test Report and triggers for review; c) requirement for retention of technical documentation under CPR. This European Standard is one of a series as listed below: EN 13108-1, Bituminous mixtures Material specifications Part 1: Asphalt Concret

23、e EN 13108-2, Bituminous mixtures Material specifications Part 2: Asphalt Concrete for Very Thin Layers (BBTM) EN 13108-3, Bituminous mixtures Material specifications Part 3: Soft Asphalt EN 13108-4, Bituminous mixtures Material specifications Part 4: Hot Rolled Asphalt EN 13108-5, Bituminous mixtur

24、es Material specifications Part 5: Stone Mastic Asphalt EN 13108-6, Bituminous mixtures Material specifications Part 6: Mastic Asphalt EN 13108-7, Bituminous mixtures Material specifications Part 7: Porous Asphalt EN 13108-8, Bituminous mixtures Material specifications Part 8: Reclaimed Asphalt EN 1

25、3108-9, Bituminous mixtures Material specifications Part 9: Asphalt for Ultra-Thin Layer (AUTL) EN 13108-20, Bituminous mixtures Material specifications Part 20: Type Testing EN 13108-21, Bituminous mixtures Material specifications Part 21: Factory Production Control According to the CEN/CENELEC Int

26、ernal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland,

27、Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, BS EN 13108-20:2016EN 13108-20:2016 (E) 5 Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13108-20:2016EN 13108-20:2016 (E) 6 Introduction This European Standard

28、 for Type Testing has been written as part of the system for the Assessment and Verification of the Constancy of Performance (AVCP) of bituminous mixtures. It is designed to be used in conjunction with the product standards EN 13108-1 to 7 and EN 131089 and is called up by these standards as part of

29、 AVCP. The Type Testing procedure has the function of providing assurance that a particular mix formulation complies with requirements in the product standard. The Type Testing procedure is designed to be applied to all harmonized elements of harmonized European Standards for bituminous mixtures whe

30、ther or not regulatory marking is to be applied. The system can also be extended to non-harmonized elements. NOTE Products CE marked in accordance with appropriate harmonized European Standards might be presumed to have the performances stated with the CE marking. It is the responsibility of the man

31、ufacturer, under Factory Production Control, to ensure that the bituminous mixture continues to be produced in accordance with the declared mix formulation. BS EN 13108-20:2016EN 13108-20:2016 (E) 7 1 Scope This European Standard specifies the Type Testing procedure for use in Assessment and Verific

32、ation of the Constancy of Performance (AVCP) of bituminous mixtures for use in roads, airfields and other trafficked areas. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references

33、, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 932-3, Tests for general properties of aggregates Part 3: Procedure and terminology for simplified petrographic description EN 933-1, Tests for geometrical p

34、roperties of aggregates Part 1: Determination of particle size distribution - Sieving method EN 933-10, Tests for geometrical properties of aggregates Part 10: Assessment of fines - Grading of filler aggregates (air jet sieving) EN 10976:2013, Tests for mechanical and physical properties of aggregat

35、es Part 6: Determination of particle density and water absorption EN 1097-7, Tests for mechanical and physical properties of aggregates Part 7: Determination of the particle density of filler Pyknometer method EN 1426, Bitumen and bituminous binders Determination of needle penetration EN 1427, Bitum

36、en and bituminous binders Determination of the softening point Ring and Ball method EN 12591, Bitumen and bituminous binders Specifications for paving grade bitumens EN 12595, Bitumen and bituminous binders Determination of kinematic viscosity EN 12596, Bitumen and bituminous binders Determination o

37、f dynamic viscosity by vacuum capillary EN 12697-1, Bituminous mixtures Test methods for hot mix asphalt Part 1: Soluble binder content EN 12697-2, Bituminous mixtures Test methods Part 2: Determination of particle size distribution EN 12697-3, Bituminous mixtures Test methods for hot mix asphalt Pa

38、rt 3: Bitumen recovery: Rotary evaporator EN 12697-4, Bituminous mixtures Test methods Part 4: Bitumen recovery: Fractionating column EN 12697-5, Bituminous mixtures Test methods for hot mix asphalt Part 5: Determination of the maximum density EN 12697-6, Bituminous mixtures Test methods for hot mix

39、 asphalt Part 6: Determination of bulk density of bituminous specimens BS EN 13108-20:2016EN 13108-20:2016 (E) 8 EN 12697-8, Bituminous mixtures Test methods for hot mix asphalt Part 8: Determination of void characteristics of bituminous specimens EN 12697-11, Bituminous mixtures Test methods for ho

40、t mix asphalt Part 11: Determination of the affinity between aggregate and bitumen EN 12697-12, Bituminous mixtures Test methods for hot mix asphalt Part 12: Determination of the water sensitivity of bituminous specimens EN 12697-16, Bituminous mixtures Test methods for hot mix asphalt Part 16: Abra

41、sion by studded tyres EN 12697-17, Bituminous mixtures Test methods for hot mix asphalt Part 17: Particle loss of porous asphalt specimen EN 12697-18, Bituminous mixtures Test methods for hot mix asphalt Part 18: Binder drainage EN 12697-19, Bituminous mixtures Test methods for hot mix asphalt Part

42、19: Permeability of specimen EN 12697-20, Bituminous mixtures Test methods for hot mix asphalt Part 20: Indentation using cube or cylindrical specimens (CY) EN 12697-21, Bituminous mixtures Test methods for hot mix asphalt Part 21: Indentation using plate specimens EN 12697-22, Bituminous mixtures T

43、est methods for hot mix asphalt Part 22: Wheel tracking EN 12697-24:2012, Bituminous mixtures Test methods for hot mix asphalt Part 24: Resistance to fatigue EN 12697-25, Bituminous mixtures Test methods for hot mix asphalt Part 25: Cyclic compression test EN 12697-26, Bituminous mixtures Test metho

44、ds for hot mix asphalt Part 26: Stiffness EN 12697-30, Bituminous mixtures Test methods for hot mix asphalt Part 30: Specimen preparation by impact compactor EN 12697-31, Bituminous mixtures Test methods for hot mix asphalt Part 31: Specimen preparation by gyratory compactor EN 12697-32, Bituminous

45、mixtures Test methods for hot mix asphalt Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor EN 12697-33, Bituminous mixtures Test methods for hot mix asphalt Part 33: Specimen prepared by roller compactor EN 12697-34, Bituminous mixtures Test methods for hot mix asphalt Pa

46、rt 34: Marshall test EN 12697-35, Bituminous mixtures Test methods for hot mix asphalt Part 35: Laboratory mixing EN 12697-39, Bituminous mixtures Test methods for hot mix asphalt Part 39: Binder content by ignition BS EN 13108-20:2016EN 13108-20:2016 (E) 9 EN 12697-41, Bituminous mixtures Test meth

47、ods for hot mix asphalt Part 41: Resistance to de-icing fluids EN 12697-43, Bituminous mixtures Test methods for hot mix asphalt Part 43: Resistance to fuel EN 12697-44, Bituminous mixtures Test methods for hot mix asphalt Part 44: Crack propagation by semi-circular bending test EN 12697-45, Bitumin

48、ous mixtures Test methods for hot mix asphalt Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test EN 12697-46, Bituminous mixtures Test methods for hot mix asphalt Part 46: Low temperature cracking and properties by uniaxial tension tests EN 12697-49, Bituminous mixtures Test metho

49、ds for hot mix asphalt Part 49: Determination of friction after polishing EN 13043, Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas EN 13108-1, Bituminous mixtures Material specifications Part 1: Asphalt Concrete EN 13108-2, Bituminous mixtures Material specifications Part 2: Asphalt Concrete