EN 13107-2004 4390 Safety requirements for cableway installations designed to carry persons - Civil engineering works《载人用索道装置的安全要求 民用工程设施》.pdf

《EN 13107-2004 4390 Safety requirements for cableway installations designed to carry persons - Civil engineering works《载人用索道装置的安全要求 民用工程设施》.pdf》由会员分享，可在线阅读，更多相关《EN 13107-2004 4390 Safety requirements for cableway installations designed to carry persons - Civil engineering works《载人用索道装置的安全要求 民用工程设施》.pdf（61页珍藏版）》请在麦多课文档分享上搜索。

1、Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 23 December 2004, Uncontrolled Copy, (c) BSIBRITISH STANDARD BS EN 13107:2004 Safety requirements for cableway installations designed to carry persons Civil engineering works The European Standard EN 13107:2004 has the status

2、of a British Standard ICS 45.100 Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 23 December 2004, Uncontrolled Copy, (c) BSIBS EN 13107:2004 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 29 October 2004 BSI 29 Oct

3、ober 2004 ISBN 0 580 44688 3 National foreword This British Standard is the official English language version of EN 13107:2004. The UK participation in its preparation was entrusted to Technical Committee MCE/20, Aerial ropeways, which has the responsibility to: A list of organizations represented o

4、n this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by

5、using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunit

6、y from legal obligations. aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summa

7、ry of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 57 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments Licensed Copy: Wang

8、 Bin, ISO/Exchange China Standards Information Centre, 23 December 2004, Uncontrolled Copy, (c) BSIEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN13107 October2004 ICS45.100 Englishversion Safetyrequirementsforcablewayinstallationsdesignedtocarry personsCivilengineeringworks Prescriptionsdescuritp

9、ourlesinstallationscbles transportantdespersonnesOuvragesdegniecivil SicherheitsanforderungenfrSeilbahnenfrden PersonenverkehrBauwerke ThisEuropeanStandardwasapprovedbyCENon12August2004. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an

10、Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemad

11、ebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,La

12、tvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2004CEN Allrightsofexploitationi

13、nanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN13107:2004:E Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 23 December 2004, Uncontrolled Copy, (c) BSIEN 13107:2004 (E) 2 Contents page 1 Scope 4 2 Normative references 4 3 Terms and definitions .6 4

14、Symbols and abbreviations 6 5 General requirements7 6 Hazard scenarios and safety measures 8 7 Actions and environmental influences8 8 Limit states .24 9 Verifications .25 10 Type of construction .37 11 Type of civil engineering works .39 12 Protection of workers43 Annex A (normative) Documentation

15、46 Annex B (informative) Extracts from ENV 1991-1:1994 .49 Annex C (informative) Adeviations55 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2000/9/EC relative to cableway installations designed to carry persons .56 Licensed Copy: W

16、ang Bin, ISO/Exchange China Standards Information Centre, 23 December 2004, Uncontrolled Copy, (c) BSIEN 13107:2004 (E) 3 Foreword This document (EN 13107:2004) has been prepared by Technical Committee CEN/TC 242 “Safety requirements for passenger transportation by rope”, the secretariat of which is

17、 held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2005, and conflicting national standards shall be withdrawn at the latest by April 2005. This document has been prepared under

18、 a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This European Standard forms part of the st

19、andards programme adopted by CEN Technical Board in relation to safety requirements for passenger transportation by rope. This programme comprises the following standards : 1) Safety requirements for cableway installations designed to carry persons - Terminology 2) Safety requirements for cableway i

20、nstallations designed to carry persons - General requirements 3) Safety requirements for cableway installations designed to carry persons - Calculations 4) Safety requirements for cableway installations designed to carry persons - Ropes 5) Safety requirements for cableway installations designed to c

21、arry persons - Tensioning devices 6) Safety requirements for cableway installations designed to carry persons - Drive systems and other mechanical equipment 7) Safety requirements for cableway installations designed to carry persons - Carriers 8) Safety requirements for cableway installations design

22、ed to carry persons Electrical equipment other than for drive systems 9) Safety requirements for cableway installations designed to carry persons - Civil engineering works 10) Safety requirements for cableway installations designed to carry persons - Pre-commissioning inspection, maintenance and ope

23、rational inspection and checks 11) Safety requirements for cableway installations designed to carry persons - Recovery and evacuation 12) Safety requirements for cableway installations designed to carry persons - Operation 13) Safety requirements for cableway installations designed to carry persons

24、- Quality assurance This series of standards form a complete set with regard to the design, manufacture, production, maintenance and operation of all installations for passenger transportation by rope. In respect to ski-tows the drafting of this European Standard has been guided by the works of the

25、International Organisation for Transportation by Rope (OITAF). According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France

26、, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 23 December 2004, Uncontrolle

27、d Copy, (c) BSIEN 13107:2004 (E) 4 1 Scope This document specifies the safety requirements applicable to civil engineering works for installations for passenger transportation by rope. It is essential that its requirements are met by taking into account the various types of installations and their e

28、nvironment. It includes requirements relating to the prevention of accidents and the protection of workers. It does not apply to installations for transportation of goods by rope nor to inclined lifts. This document is applicable to: new cableways ; alterations of existing cableways as far as the sa

29、fety of civil engineering works or part of it is involved. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (in

30、cluding any amendments) applies. ENV 1090-1, Execution of steel structures Part 1 : General rules and rules for buildings. ENV 1090-2, Execution of steel structures - Part 2: Supplementary rules for cold formed thin gauge components and sheeting. EN 1537, Execution of special geotechnical work - Gro

31、und anchors. EN 1709, Safety requirements for cableway installations designed to carry persons - Pre-commissioning inspection, maintenance, operational inspection and checks. prEN 1907:2004, Safety requirements for cableway installations designed to carry persons Terminology. EN 1908, Safety require

32、ments for cableway installations designed to carry persons - Tensioning devices. EN 1909, Safety requirements for cableway installations designed to carry persons Recovery and evacuation. ENV 1991-1:1994, Eurocode 1 : Basis of design and actions on structures - Part 1 : Basis of design. EN 1991-1-1,

33、 Eurocode 1: Basis of design and actions on structures - Part 1-1: Actions on structures - Densities, self-weight and imposed loads. EN 1991-1-2, Eurocode 1: Actions on structures - Part 1-2: General actions - Actions on structures exposed to fire. EN 1991-1-3, Eurocode 1 - Actions on structures - P

34、art 1-3: General actions - Snow loads. EN 1991-1-5, Eurocode 1 : Basis of design and actions on structures - Part 1-5 : Actions on structures - Thermal actions. EN 1991-2, Eurocode 1: Actions on structures - Part 2: Traffic loads on bridges. ENV 1991-2-4, Eurocode 1 : Basis of design and actions on

35、structures - Part 2-4 : Actions on structures - Wind actions. Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 23 December 2004, Uncontrolled Copy, (c) BSIEN 13107:2004 (E) 5 ENV 1991-2-6, Eurocode 1 : Basis of design and actions on structures - Part 2-6 : Actions on structu

36、res - Actions during execution. ENV 1991-2-7, Eurocode 1 : Basis of design and actions on structures - Part 2-7 : Actions on structures - Accidental actions due to impact and explosions. ENV 1991-4, Eurocode 1 : Basis of design and actions on structures - Part 4 : Actions in silos and tanks. ENV 199

37、1-5, Eurocode 1 : Basis of design and actions on structures - Part 5 : Actions induced by cranes and machinery. ENV 1992-1-1, Eurocode 2 : Design of concrete structures - Part 1: General rules and rules for buildings. ENV 1992-2, Eurocode 2 : Design of concrete structures - Part 2 : Concrete bridges

38、. ENV 1992-3, Eurocode 2 : Design of concrete structures - Part 3 : Concrete foundations. ENV 1993-1-1, Eurocode 3 : Design of steel structures - Part 1-1 : General rules and rules for buildings. ENV 1993-2, Eurocode 3: Design of steel structures - Part 2: Steel bridges. ENV 1993-3-1, Eurocode 3 : D

39、esign of steel structures - Part 3-1 : Towers, masts and chimneys - Towers and masts. ENV 1994-2, Eurocode 4 : Design of composite steel and concrete structures - Part 2 : Composite bridges. ENV 1995, Eurocode 5 : Design of timber structures. ENV 1996, Eurocode 6 : Design of masonry structures. ENV

40、1997, Eurocode 7 : Geotechnical design. ENV 1997-1, Eurocode 7 : Geotechnical design - Part 1 : General rules. ENV 1998, Eurocode 8 : Design provisions for earthquake resistance of structures. ENV 1998-3, Eurocode 8 : Design provisions for earthquake resistance of structures - Part 3 : Towers, masts

41、 and chimneys. ENV 1999, Eurocode 9 : Design of aluminium structures. EN 12223, Non-destructive testing - Ultrasonic examination - Specification for calibration block No. 1 EN 12397, Safety requirements for cableway installations designed to carry persons Operation. EN 12408, Safety requirements for

42、 cableway installations designed to carry persons Quality assurance. EN 12927-1, Safety requirements for cableway installations designed to carry persons Ropes - Part 1 : Selection criteria for ropes and their end fixings. EN 12927-2, Safety requirements for cableway installations designed to carry

43、persons Ropes - Part 2 : Safety factors. EN 12927-3, Safety requirements for cableway installations designed to carry persons Ropes Part 3 : Long splicing of 6 strand hauling, carrying hauling and towing ropes. EN 12927-4, Safety requirements for cableway installations designed to carry persons Rope

44、s - Part 4 : End fixings. Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 23 December 2004, Uncontrolled Copy, (c) BSIEN 13107:2004 (E) 6 EN 12927-5, Safety requirements for cableway installations designed to carry persons Ropes Part 5 : Storage, transportation, installatio

45、n and tensioning. EN 12927-6, Safety requirements for cableway installations designed to carry persons Ropes Part 6 : Discard criteria. EN 12927-7, Safety requirements for cableway installations designed to carry persons Ropes Part 7 : Inspection, repair and maintenance. EN 12927-8, Safety requireme

46、nts for cableway installations designed to carry persons Ropes Part 8 : Magnetic rope testing (MRT). EN 12929-1, Safety requirements for cableway installations designed to carry persons - General requirements - Part 1 : Requirements applicable to all installations. EN 12929-2, Safety requirements fo

47、r cableway installations designed to carry persons General requirements Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes. EN 12930, Safety requirements for cableway installations designed to carry persons Calculations. EN 13223, Safety requirements

48、for cableway installations designed to carry persons - Drive systems and other mechanical equipment. EN 13243, Safety requirements for cableway installations designed to carry persons Electrical equipment other than for drive systems. ENV 13670-1, Execution of concrete structures - Part 1: Common. prEN 13796-1, Safety requirements for cableway installations designed to carry persons Carriers - Part 1 : Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers. prEN 13796-2, Safety