EN 13084-7-2012 en Free-standing chimneys - Part 7 Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners《独立式烟囱 第7部分 用于单层壁钢.pdf

《EN 13084-7-2012 en Free-standing chimneys - Part 7 Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners《独立式烟囱 第7部分 用于单层壁钢.pdf》由会员分享，可在线阅读，更多相关《EN 13084-7-2012 en Free-standing chimneys - Part 7 Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners《独立式烟囱 第7部分 用于单层壁钢.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 13084-7:2012Free-standing chimneysPart 7: Product specifications of cylindricalsteel fabrications for use in single wall steelchimneys and steel linersBS EN 13084-7:2012 BR

2、ITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 13084-7:2012.It supersedes BS EN 13084-7:2005 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee B/506/14, Structural Chimneys and Flues.A list of organizations represented

3、 on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 71230 2

4、ICS 91.060.40Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 May 2013.Amendments issued since publicationDate Text affectedBS EN 13084-7:2012EUROPEAN STANDARD N

5、ORME EUROPENNE EUROPISCHE NORM EN 13084-7 December 2012 ICS 91.060.40 Supersedes EN 13084-7:2005English Version Free-standing chimneys - Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners Chemines autoportantes - Partie 7: Spcifica

6、tions de produit applicables aux fabrications cylindriques en acier pour chemines en acier paroi simple et parois intrieures en acier Freistehende Schornsteine - Teil 7: Produktfestlegungen fr zylindrische Stahlbauteile zur Verwendung in einschaligen Stahlschornsteinen und Innenrohren aus StahlThis

7、European Standard was approved by CEN on 27 October 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical referenc

8、es concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN me

9、mber into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, F

10、rance, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES

11、 KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13084-7:2012: EBS EN 13084-7:2012EN 13084-7:2012 (E) 2 Contents Page Foreword 41 Scope 52 Normative refer

12、ences 53 Terms and definitions .54 Requirements .64.1 General 64.2 Performance characteristics 64.2.1 Mechanical resistance and stability.64.2.2 Resistance to fire .64.2.3 Gas tightness/Leakage 64.2.4 Flow resistance 64.2.5 Dimensioning/Thermal resistance .64.2.6 Thermal shock resistance .64.2.7 Res

13、istance to freeze-thaw .74.3 Durability 74.4 Dangerous substances .75 Materials .75.1 Steels 75.2 Coating . 125.3 Insulation . 125.4 Cladding . 126 Construction 126.1 Tolerances . 126.2 Welding 126.3 Construction details . 126.4 Insulation . 126.5 Cladding . 137 Evaluation of conformity 137.1 Genera

14、l . 137.1.1 Introduction . 137.1.2 Initial type testing . 137.1.3 Further type testing 137.2 Factory production control 137.2.1 General . 137.2.2 Material records 147.2.3 Qualifications of the welders . 147.2.4 Welding quality control 147.2.5 Coatings . 147.2.6 Geometrical dimensions 148 Temperature

15、 classes 159 Product designation . 15Annex A (normative) Assessment of factory production control . 16A.1 General . 16A.2 Initial inspection 16A.3 Continuous surveillance 16A.4 Frequency of inspection 17A.4.1 General . 17A.4.2 Surveillance intervals . 17A.4.3 Declaration of manufacturer 17A.4.4 Meas

16、ures in non-compliance 17A.5 Reports 17BS EN 13084-7:2012EN 13084-7:2012 (E) 3 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive . 18Bibliography 24BS EN 13084-7:2012EN 13084-7:2012 (E) 4 Foreword This document (EN 13084-7:20

17、12) has been prepared by Technical Committee CEN/TC 297 “Free-standing industrial chimneys”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2013, and

18、 conflicting national standards shall be withdrawn at the latest by June 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This do

19、cument supersedes EN 13084-7:2005. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an int

20、egral part of this document. Compared with EN 13084-7:2005, the following changes have been made: a) Corrigendum of 2008 was incorporated; b) 6.2 was revised; c) 7.2.4 was revised. This European Standard, EN 13084, Free-standing chimneys, consists of the following parts: Part 1: General requirements

21、; Part 2: Concrete chimneys; Part 4: Brick liners Design and execution; Part 5: Material for brick liners Product specifications; Part 6: Steel liners Design and execution; Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners (the pr

22、esent document); Part 8: Design and execution of mast construction with satellite components. The following European Standard additionally applies: EN 1993-3-2, Eurocode 3: Design of steel structures Part 3-2: towers, masts and chimneys Chimneys. According to the CEN/CENELEC Internal Regulations, th

23、e national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvi

24、a, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13084-7:2012EN 13084-7:2012 (E) 5 1 Scope This European Standard deals with steel products for single wall steel chimneys and liners w

25、hich are produced either in series or as single items. It is a product standard which specifies the performance requirements of cylindrical steel fabrications for use in single wall steel chimneys and steel liners for free-standing chimneys used to convey the flue gas to the outside atmosphere. It a

26、lso specifies the requirements for insulation and cladding being part of the single wall steel chimney and liner. It provides for the evaluation of conformity of single wall steel chimneys and liners to this European Standard. 2 Normative references The following documents, in whole or in part, are

27、normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 287-1, Qualification test of welders Fusion welding Pa

28、rt 1: Steels EN 1090-2, Execution of steel structures and aluminium structures Part 2: Technical requirements for steel structures EN 1418, Welding personnel Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic ma

29、terials EN 1993-1-6, Eurocode 3 Design of steel structures Part 1-6: Strength and Stability of Shell Structures EN 1993-3-2, Eurocode 3 Design of steel structures Part 3-2: Towers, masts and chimneys Chimneys EN 10025-2, Hot rolled products of structural steels Part 2: Technical delivery conditions

30、for non-alloy structural steels EN 10025-5, Hot rolled products of structural steels Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance EN 10028-2, Flat products made of steels for pressure purposes Part 2: Non-alloy and alloy steels with speci

31、fied elevated temperature properties EN 10088-2, Stainless steels Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes EN 10095, Heat resisting steels and nickel alloys EN 10204, Metallic products Types of inspection documents EN 13084-1:

32、2007, Free-standing chimneys Part 1: General requirements EN 13084-6:2004, Free-standing chimneys Part 6: Steel liners Design and execution EN ISO 5817, Welding Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) Quality levels for imperfections (ISO 5817:2003, c

33、orrected version:2005, including Technical Corrigendum 1:2006) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 13084-1:2007 and EN 13084-6:2004 apply. The single wall steel chimney and steel liner should be considered in the same way for design and re

34、quirements. BS EN 13084-7:2012EN 13084-7:2012 (E) 6 4 Requirements 4.1 General For the purposes of this document, EN 13084-6 applies. The products of single wall steel chimney and liner manufactured in accordance with this European Standard shall comply with the requirements given in EN 13084-1 and

35、EN 1993-3-2. The design of steel chimneys should be covered by the Eurocodes dealing with chimneys and the requirements should be based on design and intended end use. 4.2 Performance characteristics 4.2.1 Mechanical resistance and stability Mechanical resistance and stability shall be verified in a

36、ccordance with EN 1993-3-2 taking into account the characteristic values given in Tables 1 to 3 in this standard. 4.2.2 Resistance to fire Resistance to fire relates only to a soot-fire occurring within the chimney. A chimney could convey air and/or different type of gases (see EN 13084-1). Soot-fir

37、e resistance shall only be verified for products conveying within the flue gas emitted for solid combustibles. The resistance to fire shall be verified in accordance with EN 13084-6. If the product has been designed to be soot fire resistant, the product designation is “G”, otherwise the designation

38、 is “O”. 4.2.3 Gas tightness/Leakage The product shall be gas tight and the class H0 shall be declared in accordance with EN 13084-6. In order to meet this requirement, the design shall be in accordance with EN 13084-6, and the manufacture shall be in accordance with the qualities and controls state

39、d in this standard. 4.2.4 Flow resistance The mean roughness value for steel to carry out flow calculations shall be declared in accordance with EN 13084-1:2007, Table A.3. The individual resistance coefficient of some forms is given in EN 13084-1:2007, Table A.4. 4.2.5 Dimensioning/Thermal resistan

40、ce Flow calculations shall be carried out in accordance with EN 13084-1. The thermal resistance shall be calculated on the basis of EN 13084-1:2007, A.2.2. NOTE Dimensions related to stability are calculated on the basis of 4.2.1. 4.2.6 Thermal shock resistance Generally, thermal shock resistance is

41、 not applicable to steel because rapid changes of temperature have no significant effect on steel chimneys and liners. For specific applications (such as turbines) thermal shock may be relevant and expert advice should be sought. BS EN 13084-7:2012EN 13084-7:2012 (E) 7 4.2.7 Resistance to freeze-tha

42、w Resistance to freeze-thaw is not relevant to steel chimneys and steel liners. 4.3 Durability The class of chemical attack shall be declared in accordance with EN 13084-1. Durability to chemical attack is covered by use of materials shown in Table 4. Other steels may be used provided their durabili

43、ty to the relevant chemical attack is demonstrated. Durability may also be achieved by other means including additional coatings and linings. 4.4 Dangerous substances National regulations on dangerous substances may require verification and declaration on release, and sometimes content, when constru

44、ction products covered by this standard are placed on those markets. In the absence of European harmonised test methods, verification and declaration on release/content should be carried out, taking into account national provisions in the place of use. NOTE An informative database covering European

45、and national provisions on dangerous substances is available at the Construction web site on EUROPA accessed through: http:/ec.europa.eu/enterprise/construction/cpd-ds/. 5 Materials 5.1 Steels The steel chimneys or liners shall be made of the steels listed in Tables 1 to 4. In addition, other steels

46、 may be used in accordance with EN 13084-6:2004, Clause 4. BS EN 13084-7:2012EN 13084-7:2012 (E) 8 Table 1 Characteristic values of yield stress in relation to temperature (fy,kin N/mm) Type of steel Temperature of the material (C) Short name Material 20 50 100 150 200 250 300 350 400 450 500 550 60

47、0 650 700 750 800 850 900 950 1000 EN 10025-2S235JR 1.0038 235 235 190 175 160 140 120 S235J2 1.0117 235 235 190 175 160 140 120 S275JR 1.0044 275 275 215 200 185 165 145 125 104 S275J2 1.0145 275 275 215 200 185 165 145 125 104 S355JR 1.0045 355 355 260 245 230 210 190 S355J2 1.0577 355 355 260 245

48、 230 210 190 Usable for Windshield and liner EN 10025-5S235JOW 1.8958 235 235 190 175 160 140 120 S235J2W 1.8961 235 235 190 175 160 140 120 S355J2WP 1.8946 355 355 260 245 230 210 190 S355J0W 1.8959 355 355 260 245 230 210 190 170 140 120 85 Usable for Windshield and liner Liners only EN 10028-2P26

49、5GH 1.0425 255 247 232215 197181166 154145 80 16 Mo 3 1.5415 270 268 259 245 228 209 190 172 156 145 139 13 CrMo 45 1.7335 290 285 275 260 243 226 209 194 180 169 159 76 10 CrMo 9 10 1.7380 300 270 249 238 232 227 221 211 198 185 173 83 44 Usable for windshield and liner EN 10088-2X5CrNi 18 10 1.4301 195 177 157 142 127 118 110 104 98 95 92 90 X2CrNi 18-9 1.4307 200 147 132 118 108 100 94 89 85 8