EN 13055-2016 en Lightweight aggregates《轻集料》.pdf

《EN 13055-2016 en Lightweight aggregates《轻集料》.pdf》由会员分享，可在线阅读，更多相关《EN 13055-2016 en Lightweight aggregates《轻集料》.pdf（54页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN 13055:2016Lightweight aggregatesBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 13055:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 13055:2016. It supersedes BS EN 13055-1:2002 and BS EN 13055-2:2004 which are

2、withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee B/502/5, Lightweight aggregates.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contrac

3、t. Users are responsible for its correctapplication. The British Standards Institution 2016. Published by BSI StandardsLimited 2016ISBN 978 0 580 87506 9ICS 91.100.15Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authorit

4、y of theStandards Policy and Strategy Committee on 31 May 2016.Amendments issued since publicationDate Text affectedBS EN 13055:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13055 May 2016 ICS 91.100.15 Supersedes EN 13055-1:2002, EN 13055-2:2004 English Version Lightweight aggregates Gra

5、nulats lgers Leichte Gesteinskrnungen This European Standard was approved by CEN on 18 March 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-t

6、o-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by transla

7、tion under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland,

8、 Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION C

9、OMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13055:2016 E BS EN 13055:2016EN 13055:2016 (E) 2 Con

10、tents Page European foreword . 5 1 Scope 7 2 Normative references 7 3 Terms and definitions . 9 4 Symbols and abbreviations 10 5 Product characteristics 10 5.1 General . 10 5.2 Density . 10 5.2.1 Loose bulk density . 10 5.2.2 Particle density . 10 5.3 Aggregate size 11 5.3.1 General . 11 5.3.2 Under

11、size 11 5.3.3 Oversize . 11 5.4 Grading . 12 5.5 Content of fines in LWA 12 5.6 Grading of LWA filler. 12 5.7 Particle shape 12 5.8 Water content 12 5.9 Water absorption . 12 5.10 Bulk crushing resistance . 12 5.11 Crushed particles . 12 5.12 Resistance to disintegration 12 5.13 Freezing and thawing

12、 resistance 13 5.14 Water suction height . 13 5.15 Compressibility and confined compressive strength 13 5.16 Resistance to cyclic compressive loading 13 5.17 Stiffening properties . 13 5.18 Voids of dry compacted LWA filler. 13 5.19 Resistance to thermal shock 13 5.20 Resistance to polishing 13 5.21

13、 Resistance to wear by abrasion from studded tyres of coarse LWA in surface treatments 14 5.22 Affinity between LWA and bitumen. 14 5.23 Resistance to fragmentation 14 5.24 Resistance to wear . 14 5.25 Chemical characteristics 14 5.25.1 General . 14 5.25.2 Water solubility 14 5.25.3 Chloride . 15 5.

14、25.4 Sulphur containing compounds 15 5.25.5 Loss on ignition . 15 5.25.6 Water-soluble constituents 15 5.25.7 Organic contaminators. 15 5.25.8 Alkali-silica reactivity of natural LWA . 15 BS EN 13055:2016EN 13055:2016 (E) 3 5.26 Dangerous substances 15 5.27 Thermal conductivity 16 5.27.1 General . 1

15、6 5.27.2 Correction for moisture 16 6 Testing 16 6.1 Sampling and sample reduction 16 6.2 Quantity of test specimens 16 6.3 Preparation of test specimens for thermal conductivity testing . 16 6.3.1 Drying . 16 6.3.2 Conditioning after drying 16 6.3.3 Preparation of test specimens . 16 6.3.4 Thicknes

16、s of test specimens . 16 7 Assessment and verification of constancy of performance - AVCP . 17 7.1 General . 17 7.2 Type testing 17 7.2.1 General . 17 7.2.2 Test samples and testing 17 7.2.3 Shared results 18 7.2.4 Test reports 18 7.3 Factory production control (FPC) . 18 7.3.1 General . 18 7.3.2 Re

17、quirements . 18 7.3.3 The FPC system and compliance with the DoP. 20 7.3.4 Initial inspection of factory and FPC covered under AVCP system 2+ . 21 7.3.5 Continuous surveillance of FPC covered under AVCP system 2+ 21 7.3.6 Procedure for modifications . 21 7.3.7 Prototypes and custom-made products . 2

18、2 8 Designation, supply, marking and labelling . 22 8.1 Designation . 22 8.2 Supply . 23 8.3 Marking and labelling . 23 Annex A (normative) Source materials considered in the development of EN 13055 and their status in respect of the scope of the standard . 24 Annex B (normative) Standards covering

19、other applications of LWA 27 Annex C (normative) Determination of bulk crushing resistance . 28 C.1 Principle . 28 C.2 Apparatus 28 C.3 Preparation of test specimens . 28 C.4 Procedure 29 C.4.1 Procedure 1. 29 C.4.2 Procedure 2. 29 C.5 Calculation and expression of results . 29 C.6 Test report 29 An

20、nex D (informative) Determination of water absorption for fine LWA 33 D.1 General . 33 BS EN 13055:2016EN 13055:2016 (E) 4 D.2 Principle 33 D.3 Apparatus 33 D.3.1 General . 33 D.3.2 Apparatus for general purposes . 33 D.3.3 Special apparatus for surface drying 33 D.4 Preparation of test specimens .

21、34 D.5 Test procedure 34 D.6 Calculation and expression of results . 34 D.7 Test report 35 Annex E (informative) Guidance on how to convert quantities by mass to quantities by volume 36 E.1 Background 36 E.2 Example calculation 36 Annex F (informative) Guidance on the effects of some chemical consti

22、tuents of LWA on the durability of concrete, mortar and grout in which they are incorporated . 37 F.1 General . 37 F.2 Chlorides . 37 F.3 Organic components . 37 F.4 Alkali aggregate reaction 37 F.5 Sulphates . 38 Annex G (informative) Indicative test frequencies for factory production control (FPC)

23、 39 Annex ZA (informative) Relationship of this European Standard with Regulation (EU) No 305/2011 42 ZA.1 Scope and relevant characteristics 42 ZA.2 System of Assessment and Verification of Constancy of Performance (AVCP) 47 ZA.3 Assignment of AVCP tasks . 48 Bibliography . 50 BS EN 13055:2016EN 13

24、055:2016 (E) 5 European foreword This document (EN 13055:2016) has been prepared by Technical Committee CEN/TC 154 “Aggregates”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsem

25、ent, at the latest by November 2016, and conflicting national standards shall be withdrawn at the latest by February 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identi

26、fying any or all such patent rights. This document supersedes EN 13055-1:2002 and EN 13055-2:2004. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports basic work requirements of EU Regulation. For relationship

27、with EU Regulation see informative Annex ZA, which is an integral part of this document. The most significant changes compared to the previous editions include: a) Merging of the former 2 parts and simplifying the title of the standard; b) Amending terminology and Annex ZA to be consistent with the

28、Construction Products Regulation; c) Clarifying the scope of the standard to cover construction products only; d) Adding a new normative Annex A dealing with all source materials considered to be within the scope; e) Referring certain recycled aggregates and MIBA to other aggregate standards (same p

29、roduct family); f) Referring certain LWA for specific applications to other aggregate standards in a new normative Annex B; g) Replacement of 3 former test method annexes with normative references to new, separate EN test method standards; h) Reorganisation and alignment of text in subclauses under

30、Clause 5 Product characteristics; i) Adding a new general clause on dangerous substances; j) Replacement of former clause on Evaluation of Conformity, and the normative text from the former annex on Factory Production Control, with new normative clauses on Assessment and Verification of Constancy of

31、 Performance; k) Adding a new informative Annex D describing a test method for determination of water absorption for fine LWA. BS EN 13055:2016EN 13055:2016 (E) 6 No changes to existing technical classes and/or threshold levels have been made. Characteristics for other aggregates are specified in th

32、e following European Standards: EN 12620, Aggregates for concrete, EN 13043, Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas, EN 13139, Aggregates for mortar, EN 13242, Aggregates for unbound and hydraulically bound materials for use in civil

33、 engineering work and road construction, EN 13383-1, Armourstone - Part 1: Specification, EN 13450, Aggregates for railway ballast. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austri

34、a, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,

35、 Switzerland, Turkey and the United Kingdom. BS EN 13055:2016EN 13055:2016 (E) 7 1 Scope This European Standard specifies the properties of Lightweight Aggregates (LWA) and fillers derived thereof obtained by processing natural or manufactured materials and mixtures of these aggregates for concrete,

36、 mortar and grout, bituminous mixtures and surface treatments and for unbound and hydraulically bound applications in construction works. This European Standard covers LWA of mineral origin having particle densities not exceeding 2000 kg/m3(2,000 Mg/m3) or loose bulk densities not exceeding 1200 kg/

37、m3(1,200 Mg/m3) including: a) natural LWA; b) LWA manufactured from natural materials; c) LWA manufactured from by-products of industrial processes or from recycled source materials; d) LWA as by-products of industrial processes. A list of source materials and specific materials, which are within th

38、e scope of this standard, is given in Annex A (normative). NOTE Recycled aggregates from construction and demolition waste and Municipal Solid Waste Incinerator Bottom Ash (MIBA) are covered by EN 12620, EN 13043, EN 13139 and EN 13242. Some LWA for specific applications are covered in separate Euro

39、pean product Standards (Annex B, normative). The requirements specified in this European Standard may not be equally relevant to all types of LWA. For particular applications, the requirements and tolerances can be adapted for the end use. 2 Normative references The following documents, in whole or

40、in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 932-1, Tests for general properties of ag

41、gregates Part 1: Methods for sampling EN 932-2, Tests for general properties of aggregates Part 2: Methods for reducing laboratory samples EN 932-5, Tests for general properties of aggregates Part 5: Common equipment and calibration EN 933-1, Tests for geometrical properties of aggregates Part 1: De

42、termination of particle size distribution Sieving method EN 933-10, Tests for geometrical properties of aggregates Part 10: Assessment of fines Grading of filler aggregates (air jet sieving) EN 1097-1, Tests for mechanical and physical properties of aggregates Part 1: Determination of the resistance

43、 to wear (micro-Deval) EN 1097-2, Tests for mechanical and physical properties of aggregates Part 2: Methods for the determination of resistance to fragmentation EN 1097-3, Tests for mechanical and physical properties of aggregates Part 3: Determination of loose bulk density and voids BS EN 13055:20

44、16EN 13055:2016 (E) 8 EN 1097-4, Tests for mechanical and physical properties of aggregates Part 4: Determination of the voids of dry compacted filler EN 1097-5, Tests for mechanical and physical properties of aggregates Part 5: Determination of the water content by drying in a ventilated oven EN 10

45、97-6, Tests for mechanical and physical properties of aggregates Part 6: Determination of particle density and water absorption EN 1097-8, Tests for mechanical and physical properties of aggregates Part 8: Determination of the polished stone value EN 1097-9, Tests for mechanical and physical propert

46、ies of aggregates Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test EN 1097-10, Tests for mechanical and physical properties of aggregates Part 10: Determination of water suction height EN 1097-11, Tests for mechanical and physical properties of aggregates

47、Part 11: Determination of compressibility and confined compressive strength of lightweight aggregates EN 1367-5, Tests for thermal and weathering properties of aggregates Part 5: Determination of resistance to thermal shock EN 1367-7, Tests for thermal and weathering properties of aggregates Part 7:

48、 Determination of resistance to freezing and thawing of Lightweight aggregates EN 1367-8, Tests for thermal and weathering properties of aggregates Part 8: Determination of resistance to disintegration of Lightweight Aggregates EN 1744-1 Tests for chemical properties of aggregates Part 1: Chemical a

49、nalysis EN 1744-3, Tests for chemical properties of aggregates Part 3: Preparation of eluates by leaching of aggregates EN 12664, Thermal performance of building materials and products Determination of thermal resistance by means of guarded hot plate and heat flow meter methods Dry and moist products of medium and low thermal resistance EN 12667, Thermal performance of building materials and products Determination of thermal resistance by means of guarded hot plate and heat flow meter methods Products of high and