EN 12935-2001 en Feather and Down - Hygiene and Cleanliness Requirements《羽绒 卫生和清洁要求》.pdf

《EN 12935-2001 en Feather and Down - Hygiene and Cleanliness Requirements《羽绒 卫生和清洁要求》.pdf》由会员分享，可在线阅读，更多相关《EN 12935-2001 en Feather and Down - Hygiene and Cleanliness Requirements《羽绒 卫生和清洁要求》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD Feather and down - Hygiene and cleanliness requirements The European Standard EN 12935:2001 has the status of a British Standard ICs 59.040 BS EN 12935:2001 NO COPYING WITHOUT BSl PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BS EN 12935:2001 National foreword This British Standar

2、d is the official English language version of EN 129352001. It supersedes BS 1425-21991 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee TC1/73, Fillings and filled articles, which has the responsibility to: - - aid enquirers to understand the text; pr

3、esent to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. - A list of organizations represented on this committee can be obtained

4、 on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facil

5、ity of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligat

6、ions. This British Standard, having been prepared under the direction of the Sector Policy and Strategy Committee for Materials and Chemicals, was published under the authority of the Standards Policy and Strategy Committee on 3 September 2001 Summary of pages This document comprises a front cover,

7、an inside front cover, the EN title page, pages 2 to 7 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. IDate I Comments 0 BSI 3 September 2001 ISBN O 580 37708 3 EUROPEAN STANDARD NORME EURO

8、PENNE EUROPISCHE NORM EN 12935 July 2001 ICs 59.040 English version Feather and down - Hygiene and cleanliness requirements Plumes et duvets - Exigences dhygine et de nettoyage Federn und Daunen -Anforderungen an Hygiene und Reinheit This European Standard was approved by CEN on 10 May 2001. CEN mem

9、bers are bound to comply with the CENKENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Upto-date lists and bibliographical references concerning such national standards may be obtained on applicatio

10、n to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same s

11、tatus as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland. Italy. Luxembourg, Netherlands, Noway. Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STAND

12、ARDIZATION COMITE EUROPEEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stascart, 36 B-1050 Brussels O 2001 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12935:2001 E EN 12935:2001 (E) Contents Page F

13、oreword . 3 - Introduction 4 I Scope 4 2 Normative references 4 3 Sampling . 4 4 Requirements regarding the hygiene and cleanliness 4 5 Marking . 5 Annex A (informative) . 6 Bibliography 7 * 2 EN 12935:2001(E) Foreword This European Standard has been prepared by Technical Committee CENITC 222 “Feath

14、er and down as filling material for any article, as well as finished articles filled with feather and down”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest b

15、y January 2002, and conflicting national standards shall be withdrawn at the latest by January 2002. This document does not supersede any existing European Standard. This standard includes a Bibliography. According to the CENEENELEC Internal Regulations, the national standards organizations of the f

16、ollowing countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. 3 EN 12935:2001 (E) Introduction Feath

17、er and down for use as filling material should meet the requirements of the present standard in order to ensure a high level of hygienic and sanitary conditions in conformity with the provisions of Art. 100 A of the Treaty as asked for by the Consumer Policies Service of the EC Commission. The selec

18、tion of analyses has taken into account the existing information in literature and the requirements of the present European standard have taken into account the use of the finished feather andlor down material or as a filling material of a manufactured article. In this way the industry that processe

19、s feathers and down can verify the degree of efficiency of the processing itself. 1 Scope This European standard provides the requirements necessary to satisfy the hygiene and cleanliness of feather and/or down filling materials. This European standard applies to finished feather and/or down materia

20、ls used as a filling of a manufactured article. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For date

21、d references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 1162 Feather and down -

22、Test methods-Determination of the oxygen index number EN 1883 Feather and down - Sampling in view of tests EN 1884 Feather and down - Test methods-Determination of microbiological state 3 Sampling The sampling shall be carried out according to EN 1883. As far as the determination of the microbiologi

23、cal state is concerned, the sampling and packaging of the laboratory bulk sample should be performed to avoid inadvertent contamination and significant alterations to the numbers and nature of micro-organisms in the sample. 4 Requirements regarding the hygiene and cleanliness The mandatory requireme

24、nts for finished feather andlor down material are given in Table 1. For finished milled feather only microbiological state applies. Other optional impurity indicators are mentioned in Table A.1. NOTE down filling material has been thoroughly washed and suitably processed. The bacterial species and r

25、elated limits of acceptability have been established to ensure that the feather and/or A limited amount of the specified micro-organisms can be considered as indicating “non contamination”. 4 EN 12935:2001(E) Table 1 - Mandatory requirements for finished feather and/or down material 5 impurity indic

26、ators Oxygen index number a Microbiological state - Mesophil aerobic bacteria count - Faecal streptococci count - Sulphite reducing clostridium count - Presence of salmonella European standard referred to EN 1162 EN 1884 Selective medium and count plate method Limits of acceptability less than 20 le

27、ss than 1 O6 CFU/g less than 1 O2 CFU/g less than IO2 CFU/g absent in 20 g a This oxygen index number is indicative of the cleanliness of the analysed material and shall be considered as a first level screening and not as a direct indicator of the hygienic state. If the oxygen index number is below

28、or equal to 20 the filling material is considered as hygienically suitable and no further analysis of the microbiological state is necessary. If the oxygen index number is between 20 and 50 the required limits of acceptability of the microbiological state are to be met. If the oxygen index number is

29、 above 50 the filling material is not considered to be hygienically suitable and it has to be reprocessed. In case any of the limits for the microbiological state is exceeded, the filling material cannot be considered hygienically suitable. Marking .! I$ Each bag, bale or other package of feather an

30、dlor down material as such and each manufactured product filled with such a material shall be provided with an indelible wording or an undetachable label stating that the finished material used as a filling meets the requirements of the present European standard. 5 EN 12935:2001 (E) Impurity indicat

31、ors Oil and fat content Turbidity PH Annex A (informative) European standard referred to EN 1163 EN 1164 min. 300 mm EN 1413 6,6 to 8,O Recommended values 05 % to 2,O % Table A.l - Optional impurity indicators and recommended values for finished feather andlor down material 6 EN 12935:2001 (E) Bibli

32、ography EN 1163 EN 1164 EN 1413 Feather and down - Test methods - Determination of the oil and fat content Feather and down - Test methods - Determination of the turbidity of an aqueous extract Textiles - Determination of pH of aqueous extract 7 BS EN 12935:2001 BSI 389 Chiswick High Road London W4

33、4AL BSI - British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revisi

34、on. Users of British Standards should make sure that they possess the latest amendments or 2ditions. t is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the

35、Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers autonatically receive the latest editions of standards.

36、 Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: O20 8996 9001. Fax: 020 8996 7001. Standards are also available from the BSI website at htto:/www.bsi-. In response to orders for international standards, it is BSI p

37、olicy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Servi

38、ce. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: O20 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts

39、 on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Further information about BSI is available on the BSI website at http:/www.bsi-&. Copyright Copyright subsists in all BSI publications. BSI also hol

40、ds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means - electronic, photocopying, record

41、ing or otherwise - without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: O20 8996 7070.