EN 12927-5-2004 en Safety requirements for cableway installations designed to carry persons - Ropes - Part 5 Storage transportation installation and tensioning《载人用索道装置的安全要求 绳索 第5部分.pdf

《EN 12927-5-2004 en Safety requirements for cableway installations designed to carry persons - Ropes - Part 5 Storage transportation installation and tensioning《载人用索道装置的安全要求 绳索 第5部分.pdf》由会员分享，可在线阅读，更多相关《EN 12927-5-2004 en Safety requirements for cableway installations designed to carry persons - Ropes - Part 5 Storage transportation installation and tensioning《载人用索道装置的安全要求 绳索 第5部分.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 12927-5:2004 Safety requirements for cableway installations designed to carry persons Ropes Part 5: Storage, transportation, installation and tensioning The European Standard EN 12927-5:2004 has the status of a British Standard ICS 45.100 BS EN 12927-5:2004 This British Standa

2、rd was published under the authority of the Standards Policy and Strategy Committee on 27 October 2004 BSI 27 October 2004 ISBN 0 580 44658 1 National foreword This British Standard is the official English language version of EN 12927-5:2004. The UK participation in its preparation was entrusted to

3、Technical Committee MCE/20, Aerial ropeways, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document

4、may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. User

5、s are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change,

6、 and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 9 and a back cover. The BSI copyright notice displayed in this docu

7、ment indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN129275 October2004 ICS45.100 Englishversion Safetyrequirementsforcablewayinstallationsdesignedtocarry personsRopesPart5:Storage,transportation,

8、installation andtensioning Prescriptionsdescuritpourlesinstallationscbles transportantdespersonnesCblesPartie5:Stockage, transport,miseenplaceetmiseentension SicherheitsanforderungenfrSeilbahnenund SchleppaufzgedesPersonenverkehrsSeileTeil5: Lagerung,Transport,Einbau,undSpannen ThisEuropeanStandardw

9、asapprovedbyCENon23August2004. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicatio

10、ntotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersare

11、thenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDAR

12、DIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2004CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN129275:2004:EEN 12927-5:2004 (E) 2 Contents Page Foreword3 1 Scope 5 2 Normative refe

13、rences 5 3 Terms and definitions .6 4 General requirements7 4.1 Application of this standard .7 4.2 Safety principle 7 5 Safety requirements and measures.7 5.1 Packaging, storage, handling and transportation7 5.2 Installation, tensioning, connecting and/or splicing8 5.3 Measurements, adjustments, te

14、sts and records 8 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2000/9/EC relating to cableway installations designed to carry persons .9 Table ZA Correspondence between this European Standard and Directive 2000/9/EC relating to cab

15、leway installations designed to carry persons.9 EN 12927-5:2004 (E) 3 Foreword This document (EN 12927-5:2004) has been prepared by Technical Committee CEN/TC 242 “Safety requirements for passenger transportation by rope”, the secretariat of which is held by AFNOR. This European Standard shall be gi

16、ven the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2005, and conflicting national standards shall be withdrawn at the latest by April 2005. This document has been prepared under a mandate given to CEN by the European Commission

17、 and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This EN 12927 includes the following parts under the general title “Safety requirements for c

18、ableway installations designed to carry persons Ropes“: Part 1: Selection criteria for ropes and their end fixings Part 2: Safety factors Part 3: Long splicing of 6 strand hauling, carrying-hauling and towing ropes Part 4: End fixings Part 5: Storage, transportation, handling and tensioning Part 6:

19、Discard criteria Part 7: Inspection, repair and maintenance Part 8: Magnetic rope testing (MRT) This European Standard forms part of the standards programme adopted by the CEN Technical Board in relation of safety requirements for passenger transportation by rope. This programme includes the followi

20、ng standards : 1) Safety requirements for cableway installations designed to carry persons - Terminology 2) Safety requirements for cableway installations designed to carry persons - General requirements 3) Safety requirements for cableway installations designed to carry persons - Calculations 4) Sa

21、fety requirements for cableway installations designed to carry persons - Ropes 5) Safety requirements for cableway installations designed to carry persons - Tensioning devices 6) Safety requirements for cableway installations designed to carry persons - Drive systems and other mechanical equipment 7

22、) Safety requirements for cableway installations designed to carry persons - Carriers 8) Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems 9) Safety requirements for cableway installations designed to carry persons - Civil en

23、gineering works EN 12927-5:2004 (E) 4 10) Safety requirements for cableway installations designed to carry persons Pre-commissioning inspection, maintenance and operational inspection and checks 11) Safety requirements for cableway installations designed to carry persons Recovery and evacuation 12)

24、Safety requirements for cableway installations designed to carry persons - Operation 13) Safety requirements for cableway installations designed to carry persons - Quality assurance Together these form a series of standards regarding design, manufacture, production, maintenance and operation of all

25、installations for passenger transportation by rope. In respect of ski-tows, the drafting of this European Standard has been guided by the works of the International Organisation for Transportation by rope (OITAF). According to the CEN/CENELEC Internal Regulations, the national standards organization

26、s of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia,

27、 Spain, Sweden, Switzerland and United Kingdom. EN 12927-5:2004 (E) 5 1 Scope This part of EN 12927 specifies the safety requirements for the storage, transportation, installation and tensioning of ropes for installations for the transportation of passenger by rope. It also includes the requirements

28、 for adjusting, measuring and recording the condition of the rope during and on completion of the installation. It provides the safety requirements and measures to reduce the effect of hazards to the rope and possible hazards from the rope to persons and equipment during these operations. It does no

29、t apply to installations for the transportation of goods, nor to inclined lifts. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the r

30、eferenced document (including any amendments) applies. EN 1709, Safety requirements for cableway installations designed to carry persons - Pre-commissioning inspection, maintenance, operational inspection and checks. prEN 1907:2004, Safety requirements for cableway installations designed to carry pe

31、rsons - Terminology. EN 1908, Safety requirements for cableway installations designed to carry persons - Tensioning devices. EN 1909, Safety requirements for cableway installations designed to carry persons - Recovery and evacuation. EN 12385-2:2002, Steel wire ropes Safety Part 2: Definitions, desi

32、gnation and classification. EN 12397, Safety requirements for cableway installations designed to carry persons Operation. EN 12408, Safety requirements for cableway installations designed to carry persons Quality assurance. EN 12927-1, Safety requirements for cableway installations designed to carry

33、 persons Ropes Part 1: Selection criteria for ropes and their end fixings. EN 12927-2, Safety requirements for cableway installations designed to carry persons Ropes Part 2: Safety factors. EN 12927-3, Safety requirements for cableway installations designed to carry persons Ropes Part 3: Long splici

34、ng of 6 strand hauling, carrying-hauling and towing ropes. EN 12927-4, Safety requirements for cableway installations designed to carry persons Ropes Part 4: End fixings. EN 12927-6, Safety requirements for cableway installations designed to carry persons Ropes Part 6: Discard criteria. EN 12927-7,

35、Safety requirements for cableway installations designed to carry persons Ropes Part 7: Inspection, repair and maintenance. EN 12927-8, Safety requirements for cableway installations designed to carry persons Ropes Part 8:Magnetic rope testing (MRT). EN 12929-1, Safety requirements for passenger tran

36、sportation by rope - General requirements - Part 1: Requirements applicable to all installations. EN 12927-5:2004 (E) 6 EN 12929-2, Safety requirements for cableway installations designed to carry persons General requirements Part 2: Additional requirements for reversible bicable aerial ropeways wit

37、hout carrier truck brakes. EN 12930, Safety requirements for cableway installations designed to carry persons Calculations. EN 13107, Safety requirements for cableway installations designed to carry persons Civil engineering works. EN 13223, Safety requirements for cableway installations designed to

38、 carry persons Drive systems and other mechanical equipment. EN 13243, Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems. prEN 13796-1, Safety requirements for cableway installations designed to carry persons Carriers Part 1:

39、 Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers. prEN 13796-2, Safety requirements for cableway installations designed to carry persons Carriers Part 2: Slipping resistance tests for grips. prEN 13796-3, Safety requirements for cableway installat

40、ions designed to carry persons Carriers Part 3: Fatigue testing. 3 Terms and definitions For the purposes of this document, the terms and definitions given in prEN 1907:2004, in EN 12385-2:2002 and the following apply. 3.1 installer person or organisation responsible for the whole rope installation,

41、 the splicing and the end connecting, the tensioning and the adjustment, or a part of it EN 12927-5:2004 (E) 7 4 General requirements 4.1 Application of this standard The requirements of this European Standard apply to all installations along with those of EN 1709, EN 1908, EN 1909, EN 12397, EN 124

42、08, EN 12927-1, EN 12927-2, EN 12927-3, EN 12927-4, EN 12927-6, EN 12927-7, EN 12927-8, EN 12929-1, EN 12929-2, EN 12930, EN 13107, EN 13223, EN 13243, prEN 13796-1, prEN 13796-2 and prEN 13796-3. 4.2 Safety principle 4.2.1 General The safety principles set out in EN 12929-1 apply. 4.2.2 Hazard scen

43、arios In addition the following events may lead to hazardous situations, which may be avoided or limited by the requirements of this document: a) inefficient rope protection during storage may lead to corrosion which may lead to rope failure within an inspection period; b) the package on reels may l

44、ead to hazardous situations if by a failure of the support the reel can start rolling; c) the failure of the rope connection with an auxiliary rope or with the brake controlled reel as well as the turn out from the installation support may lead to the release of the elastic potential energy of the p

45、ulled rope during the installation process. 5 Safety requirements and measures 5.1 Packaging, storage, handling and transportation 5.1.1 General Any special requirements for packaging, marking, lifting devices, storage conditions and transportation shall be agreed by all involved parties. NOTE Due n

46、otice should be taken of any recognised lifting standards where they exist. 5.1.2 Storage Adequate protection and support shall be provided to the rope taking into account storage location and duration. Rope and package shall be subject to periodic inspection during storage. NOTE Under prolonged per

47、iods of storage it may be necessary, depending on storage conditions or state of rope, to provide additional protection, e.g. in the form of a suitable rope dressing, or improvements to storage conditions. 5.1.3 Handling The package shall be lifted or handled by means of suitably fitted and designed

48、 accessories and equipment. 5.1.4 Transportation The package shall be firmly secured during transportation such that no damage shall occur to the rope and its package. EN 12927-5:2004 (E) 8 5.2 Installation, tensioning, connecting and/or splicing 5.2.1 General The installer shall provide the purchaser with details of the procedure he intends to adopt. NOTE The intended procedure should be submitted by the purchaser to the rope manufacturer and the cableway designer