EN 12855-2003 en Food processing machinery - Rotating bowl cutters - Safety and hygiene requirements (Incorporates Amendment A1 2010)《食品加工机械 转筒切割机 安全和卫生要求 包含修改件A1-2010》.pdf

《EN 12855-2003 en Food processing machinery - Rotating bowl cutters - Safety and hygiene requirements (Incorporates Amendment A1 2010)《食品加工机械 转筒切割机 安全和卫生要求 包含修改件A1-2010》.pdf》由会员分享，可在线阅读，更多相关《EN 12855-2003 en Food processing machinery - Rotating bowl cutters - Safety and hygiene requirements (Incorporates Amendment A1 2010)《食品加工机械 转筒切割机 安全和卫生要求 包含修改件A1-2010》.pdf（44页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 12855:2003+A1:2010Food processing machinery Rotating bowl cutters Safety and hygiene requirementsICS 67.250g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51

2、g60g53g44g42g43g55g3g47g36g58National forewordThis British Standard is the UK implementation of EN 12855:2003+A1:2010. It supersedes BS EN 12855:2003 which is withdrawn.The start and finish of text introduced or altered by amendment isindicated in the text by tags. Tags indicating changes to CEN tex

3、tcarry the number of the CEN amendment. For example, text alteredby CEN amendment A1 is indicated by !“.The UK participation in its preparation was entrusted by Technical Committee MCE/3, Safeguarding of machinery, to Subcommittee MCE/3/5, Food industry machines.A list of organizations represented o

4、n this subcommittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.BS EN 12855:2003

5、+A1:2010This British Standard, was published under the authority of the Standards Policy andStrategy Committee on 3 September 2003 BSI 2010Amendments/corrigenda issued since publicationDate Comments 31 July 2010 Implementation of CEN amendment A1:2010ISBN 978 0 580 62987 7EUROPEAN STANDARD NORME EUR

6、OPENNE EUROPISCHE NORM EN 12855:2003+A1 June 2010 ICS 67.260 Supersedes EN 12855:2003English Version Food processing machinery - Rotating bowl cutters - Safety and hygiene requirements Machines pour les produits alimentaires - Cutters cuve tournante - Prescriptions relatives la scurit et lhygine Nah

7、rungsmittelmaschinen - Kutter mit umlaufender Schssel - Sicherheits- und Hygieneanforderungen This European Standard was approved by CEN on 2 July 2003 and includes Amendment 1 approved by CEN on 30 April 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate

8、 the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exis

9、ts in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards b

10、odies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United

11、Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12855:2003+A1:2

12、010: EEN 12855:2003+A1:2010 (E) 2 Contents page Foreword 3Introduction . 41 Scope 52 Normative references 73 Terms and definitions . 84 List of hazards 94.1 General 94.2 Mechanical hazards . 94.3 Electrical hazards 114.4 Hydraulic hazards 114.5 Hazard from loss of stability . 114.6 Noise hazard . 11

13、4.7 Hazard from use of gases (N2, CO2and steam) . 114.8 Hazards from non-compliance with ergonomic principles . 114.9 Hazards from non-compliance with hygiene principles 115 Safety requirements and/or measures 125.1 General 125.2 Mechanical hazards . 125.3 Electrical Hazards 185.4 Hydraulic and pneu

14、matic hazards . 215.5 Hazard from loss of stability . 215.6 Noise reduction 215.7 Hazard from use of gases (N2, CO2and steam) . 215.8 Ergonomic requirements 225.9 Hygiene and cleaning 226 Verification of safety requirements and/or safety measures 247 Information for use 257.1 General 257.2 Operating

15、 instructions 257.3 Training of operators . 278 Marking . 27Annex A (normative) Common hazards for food processing machines and reduction requirements applicable to rotating bowl cutters 29Annex B (normative) Noise test code for rotating bowl cutters (grade 2) 31Annex C (normative) Design principles

16、 to ensure cleanability of rotating bowl cutters . 33Annex ZA (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“ . 39Bibliography 40BS EN 12855:2003+A1:2010EN 12855:2003+A1:2010 (E) 3 Foreword This document (EN 12855:2003+A1:2010) ha

17、s been prepared by Technical Committee CEN/TC 153 “Food processing machinery - Safety and hygiene specifications”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the la

18、test by December 2010, and conflicting national standards shall be withdrawn at the latest by December 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or a

19、ll such patent rights. This document includes Amendment 1, approved by CEN on 2010-04-30. This document supersedes EN 12855:2003. The start and finish of text introduced or altered by amendment is indicated in the text by tags!“XThis document has been prepared under a mandate given to CEN by the Eur

20、opean Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. It is one of a series of standards which have been prepared for machines and

21、equipment for meat processing in accordance with EN 1672-2. !deleted text“ According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, De

22、nmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 12855:2003+A1:2010EN 12855:2003+A1:2010 (E) 4 Introductio

23、n This standard covers rotating bowl cutters with optional loading and unloading devices. !This document is a type C standard as stated in EN ISO 12100. The machinery concerned and the extent to which hazards, hazardous situations and hazardous events are covered are indicated in the scope of this d

24、ocument. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the other standards, for machines that have been designed and built according to the provisions of this t

25、ype C standard.“ BS EN 12855:2003+A1:2010EN 12855:2003+A1:2010 (E) 5 1 Scope 1.1 This European Standard specifies requirements for bowl cutters (see figure 1) used when stationary and positioned on the floor or at table height. Bowl cutters are food machines used to process fresh or frozen meat, mea

26、t products, fish and vegetables in a rotating bowl. This is performed by means of vertical blades rotating around a nearly horizontal axis. !This European Standard deals with all significant hazards, hazardous situations and events relevant to rotating bowl cutters, when they are used as intended an

27、d under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard specifies the hazards which can arise during commissioning, operation, cleaning, use, maintenance and decommissioning of the machine.“ This standard does not apply to household bo

28、wl cutters. 1.2 This standard only applies to machines which are manufactured after the date of issue of this standard. 1.3 This standard covers the following types of bowl cutters according to the diameter (D) or the volume (V) of the bowl: Type 1 bowl cutters D 1 200 mm or V 120 l For type 2 and t

29、ype 3 bowl cutters, loading devices are also covered in this standard. Bowl cutters are constructed, for example, from a machine frame, a bowl, a set of cutting blades, a blade shaft, a blade cover, a noise cover, a loading and removal device, an associated drive and electrical, hydraulic and pneuma

30、tic components and also components for fumigating, vacuuming, heating and cooling according to machine type. NOTE In preparing this standard it was assumed that the machine would be operated by trained personnel. BS EN 12855:2003+A1:2010EN 12855:2003+A1:2010 (E) 6 Key 1 2 3 4 5 noise cover blade cov

31、er unloading device mushroom bowl 6 7 8 9 10 control elements fixed safety hand device machine frame loading device transport trolley is not part of the rotating bowl cutter covered by this standard Figure 1 Elements of a bowl cutter, accessories The fresh or deep-frozen material is fed manually or

32、by means of a loading device into the bowl of the bowl cutter. On account of the rotation of the cutter bowl at different speeds of the blade shaft, the material is mixed with additives, size reduced or emulsified. This can also take place under vacuum, or when liquid nitrogen or carbon dioxide or s

33、team is added, or when boiling takes place at the same time. Bowl cutters do not operate in a continuous mode. BS EN 12855:2003+A1:2010EN 12855:2003+A1:2010 (E) 7 2 Normative references !The following referenced documents are indispensable for the application of this document. For dated references,

34、only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 614-1, Safety of machinery Ergonomic design principles Part 1: Terminology and general principles EN 953:1997, Safety of machinery Guards General requirements

35、for the design and construction of fixed and movable guards EN 982:1996, Safety of machinery Safety requirements for fluid power systems and their components Hydraulics EN 983:1996, Safety of machinery Safety requirements for fluid power systems and their components Pneumatics EN 1005-1, Safety of m

36、achinery Human physical performance Part 1: Terms and definitions EN 1005-2, Safety of machinery Human physical performance Part 2: Manual handling of machinery and component parts of machinery EN 1005-3, Safety of machinery Human physical performance Part 3: Recommended force limits for machinery o

37、peration EN 1037, Safety of machinery Prevention of unexpected start-up EN 1088:1995, Safety of machinery Interlocking devices associated with guards Principles for design and selection EN 1672-2:2005, Food processing machinery Basic concepts Part 2: Hygiene requirements EN 60204-1:2006, Safety of m

38、achinery Electrical equipment of machines Part 1: General requirements (IEC 60204-1:2005, modified) EN 60529:1991, Degrees of protection provided by enclosures (IP Code) (IEC 60529:1989) EN ISO 3744, Acoustics Determination of sound power levels of noise sources using sound pressure Engineering meth

39、od in an essentially free field over a reflecting plane (ISO 3744:1994) EN ISO 4871, Acoustics Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) EN ISO 11204:1995, Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure

40、 levels at a work station and at other specified positions Method requiring environmental corrections (ISO 11204:1995) EN ISO 11688-1, Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning (ISO/TR 11688-1:1995) EN ISO 12100-1:2003, Safety of machinery Ba

41、sic concepts, general principles for design Part 1: Basic terminology, methodology (ISO 12100-1:2003) EN ISO 12100-2:2003, Safety of machinery Basic concepts, general principles for design Part 2: Technical principles and specifications EN ISO 13849-1:2008, Safety of machinery Safety related parts o

42、f control systems Part 1: General principles for design EN ISO 13850, Safety of machinery Emergency stop equipment Principles for design (ISO 13850:2006) BS EN 12855:2003+A1:2010EN 12855:2003+A1:2010 (E) 8 EN ISO 13857:2008, Safety of machinery Safety distances to prevent hazard zones being reached

43、by the upper and lower limbs (ISO 13857:2008)“ 3 Terms and definitions !For the purposes of this document, the terms and definitions given in EN ISO 12100-1:2003, EN 1672-2:2005 and the following apply.“ 3.1 unloading device comprises a swivel arm with a rotating disc for emptying the bowl 3.2 conta

44、iner a unit for holding ingredients to be processed and the product 3.3 loading device a lift-tilt device for raising and tilting transport trolleys and containers 3.4 locking device a device for fixing the transport trolley or container in the load bearing device 3.5 transport trolley a travelling

45、device for holding ingredients to be processed and products 3.6 fixed hand safety device rigid strips integrated into the blade cover, which together with the mushroom cover the cutting set 3.7 noise cover equipment for covering the part of the bowl, which is not covered by the blade cover, intended

46、 to decrease the noise emitted by the cutting set 3.8 machine frame the structure on which the machine parts are mounted 3.9 blade generally sickle-shaped and convex sharpened cutting inserts adapted to the bowl profile 3.10 cutting set combination of blades which can be mounted on the blade shaft 3

47、.11 blade cover movable cover over the cutting set and a portion of the bowl 3.12 blade shaft drive shaft for the cutting set BS EN 12855:2003+A1:2010EN 12855:2003+A1:2010 (E) 9 3.13 mushroom formation of the centre of the bowl, giving support for the blade cover and keeping the product travelling t

48、hrough the rotating blades 3.14 bowl container for ingredients or cut product 3.15 bowl volume volume of the bowl expressed in litres, (measured when filled with water to the maximum fill level) 3.16 vacuum boiling lid cover, required for production of certain products. It can replace the noise cove

49、r 4 List of hazards 4.1 General This clause and annex A contain the hazards and hazardous situations as far as they are dealt with in this European Standard, identified by a risk assessment significant for this type of machinery and which require action identified to eliminate or reduce risk. Before using this standard it is important to carry out a risk