EN 1265-1999 en Safety of machinery - Noise test code for foundry machines and equipment (Incorporates Amendment A1 2008)《机械安全 铸造机器和设备的噪音试验规程 包含修改件A1-2008》.pdf

《EN 1265-1999 en Safety of machinery - Noise test code for foundry machines and equipment (Incorporates Amendment A1 2008)《机械安全 铸造机器和设备的噪音试验规程 包含修改件A1-2008》.pdf》由会员分享，可在线阅读，更多相关《EN 1265-1999 en Safety of machinery - Noise test code for foundry machines and equipment (Incorporates Amendment A1 2008)《机械安全 铸造机器和设备的噪音试验规程 包含修改件A1-2008》.pdf（44页珍藏版）》请在麦多课文档分享上搜索。

1、|BRITISH STANDARD BS EN 1 2 6 5 : 1 9 9 9ICS17.140.20;25.120.30NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWS a f e t y o f m a c h i n e r y N o i s e t e s t c o d e f o r foundry machines and equipment+A1:2008National forewordThis British Standard is the UK implementation

2、 ofEN 1265:1999+A1:2008. It supersedes BS EN 1265:1999 which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indi

3、cated by !“.The UK participation in its preparation was entrusted to Technical Committee MCE/3/10, Foundry machinery Safety.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a

4、 contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.BS EN 1265:1999+A1:2008This British Standard having been prepared under the direction of the Engineering Sector Committee, was published under the authority o

5、f the Standards Committee and comes into effect on 15 December 1999 BSI 2009Amendments/corrigenda issued since publicationDate Comments 31 August 2009 Implementation of CEN amendment A1:2008ISBN 978 0 580 61495 8EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1265:1999+A1 November 2008 ICS 17.1

6、20.20; 25.120.30 Supersedes EN 1265:1999English Version Safety of machinery - Noise test code for foundry machines and equipment Scurit des machines - Code dessai acoustique pour machines et quipements de fonderie Sicherheit von Maschinen - Geruschmessverfahren fr Gieereimaschinen und -anlagen This

7、European Standard was approved by CEN on 2 July 1999 and includes Amendment 1 approved by CEN on 5 October 2008. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any al

8、teration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by t

9、ranslation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Ge

10、rmany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMU

11、NG Management Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1265:1999+A1:2008: E2 Contents Page Foreword4 Introduction .5 1 Scope 5 2 Normative references 6 3 !Terms and definition

12、s“.7 4 Description of machinery family 8 5 Sound power level determination 8 5.1 Basic international standards to be used .8 5.2 Measurement uncertainty .8 5.3 Measurement procedure .8 6 Emission sound pressure level determination.9 6.1 Basic international standards to be used .9 6.2 Selection of re

13、levant work stations .9 6.3 Measurement uncertainty .9 6.4 Measurement procedure .9 7 Installation and mounting conditions9 8 Operating conditions.10 9 Measurement uncertainties 10 10 Information to be recorded .10 11 Information to be reported10 12 Declaration and verification of noise emission val

14、ues10 Annex A (normative) Coremaking machines .12 Annex B (normative) Moulding machines 15 Annex C (normative) Knock-out grids and knock-out trays.17 Annex D (normative) Centrifugal dry abrasive blasting equipment 22 Annex E (normative) Air-blasting equipment.24 Annex F (normative) High pressure die

15、casting machines26 Annex G (informative) Core making machines - Data sheet - noise test code .28 Annex H (informative) Moulding machines - Data sheet - Noise test code.30 Annex I (informative) Knock-out grids and knock-out trays - Data sheet - Noise test code .32 Annex J (informative) Centrifugal dr

16、y abrasive blasting equipment - Data sheet - Noise test code.34 Annex K (informative) Air blasting equipment - Data sheet - Noise test.36 Annex L (informative) High pressure diecasting machine - Data sheet - Noise test code 38 Annex ZA (informative) !Relationship between this European Standard and t

17、he Essential Requirements of EU Directive 98/37/EC“.40 Annex ZB (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“.41 BS EN 1265:1999+A1:2008EN 1265:1999+A1:2008 (E)3 ! Table title !Table 1 Example of declared dual-number noise value

18、s“11 Figure title Figure C.1 Reference box, measuring surface and position of measuring points in case of knock-out grid for sound power level determination according to the surface enveloping method 20 Figure C.2 Reference box, measuring surface and measuring positions in case of knock-out tray for

19、 sound power level determination according to the surface enveloping method.21 “ BS EN 1265:1999+A1:2008EN 1265:1999+A1:2008 (E)4 Foreword This document (EN 1265:1999+A1:2008) has been prepared by Technical Committee CEN/TC 202 “Foundry machinery“, the secretariat of which is held by DIN. This Europ

20、ean Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. This document includes Amendment 1, approved by CEN on 2008-10

21、-05. This document supersedes EN 1265:1999. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential re

22、quirements of EU Directive(s). !For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document“. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Europea

23、n Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdo

24、m. BS EN 1265:1999+A1:2008EN 1265:1999+A1:2008 (E)5 Introduction This noise test code provides manufacturers and third parties with the means to carry out noise emission measurements, determine values for noise declaration purposes and provide the means for their verification. This document follows

25、the rules of EN ISO 12001. The complexity, variety and nature of foundry equipment makes the measurement of sound power level very complicated. This explains the approach taken in the body of the standard for the determination of the sound power level. 1 Scope !This“ noise test code specifies all th

26、e information necessary to carry out efficiently and under standardized conditions the determination, declaration and verification of the !noise emission values“ of several groups of foundry machinery. It specifies noise measurement methods that are available and operating and mounting conditions th

27、at shall be used for the test. !Noise emission values“ include emission sound pressure levels at work stations and the sound power level. The determination of these quantities is necessary for: manufacturers to declare the noise emitted; comparing the noise emitted by machines in the group concerned

28、; purposes of noise control at the source at the design stage. The use of this standard ensures the reproducibility of the determination of the !noise emission values“ within specified limits determined by the grade of accuracy of the basic noise measurement method used. Noise measurement methods al

29、lowed by this standard are engineering methods (grade 2) and survey methods (grade 3). This standard has a main body giving general requirements common to the foundry machines family. Six normative Annexes give requirements specific to the groups of foundry machinery listed below: core making machin

30、es (EN 710); moulding machines (EN 710); knock-out grids and knock-out trays (EN 710); dry abrasive blasting equipment (not restricted to foundry application) (!EN 1248“); air blasting equipment (!EN 1248“); diecasting machines (EN 869); and six informative Annexes giving guidance for the definition

31、 of specific operating conditions. The main body of this standard also gives guidance for the measurement of the noise emission of foundry machines not dealt with in the Annexes. This standard does not cover the computation of personnel daily noise exposure. BS EN 1265:1999+A1:2008EN 1265:1999+A1:20

32、08 (E)6 2 Normative references !The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.“ !EN 710:1997, Sa

33、fety requirements for foundry moulding and coremaking machinery and plant and associated equipment EN 869:2006, Safety of machinery Safety requirements for pressure metal diecasting units EN 1248:2001, Foundry Machinery Safety requirements for abrasive blasting equipment EN 61672-1:2003, Electroacou

34、stics Sound level meters Part 1: Specifications (IEC 61672-1:2002) EN ISO 3743-1:1995, Acoustics Determination of sound power levels of noise sources Engineering methods for small, movable sources in reverberant fields Part 1: Comparison method in hard-walled test rooms (ISO 3743-1:1994) EN ISO 3744

35、:1995, Acoustics Determination of sound power levels of noise sources using sound pressure Engineering method in an essentially free field over a reflecting plane (ISO 3744:1994) EN ISO 3746:1995, Acoustics Determination of sound power levels of noise sources using sound pressure Survey method using

36、 an enveloping measurement surface over a reflecting plane (ISO 3746:1995) EN ISO 4871:1996, Acoustics Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) EN ISO 9614-1:1995, Acoustics Determination of sound power levels of noise sources using sound inten

37、sity Part 1: Measurement at discrete points (ISO 9614-1:1993) EN ISO 9614-2:1996, Acoustics Determination of sound power levels of noise sources using sound intensity Part 2: Measurement by scanning (ISO 9614-2:1996) EN ISO 11201:1995, Acoustics Noise emitted by machinery and equipment Measurement o

38、f emission sound pressure levels at a work station and at other specified positions Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995) EN ISO 11202:1995, Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work s

39、tation and at other specified positions Survey method in situ (ISO 11202:1995) EN ISO 11204:1995, Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work station and at other specified positions Method requiring environmental corrections (ISO 11204:

40、1995) EN ISO 12001:1996, Acoustics Noise emitted by machinery and equipment Rules for the drafting and presentation of a noise test code (ISO 12001:1996) EN ISO 12100-1:2003, Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology (ISO 12100-1:2003) E

41、N ISO 12100-2:2003, Safety of machinery Basic concepts, general principles for design Part 2: Technical principles (ISO 12100-2:2003)“ BS EN 1265:1999+A1:2008EN 1265:1999+A1:2008 (E)7 3 !Terms and definitions For the purposes of this document, the terms and definitions given in EN ISO 12100-1:2003 a

42、nd the following apply.“ !3.1 noise emission airborne sound radiated by a well-defined noise source (e.g. the machine under test) 3.2 basic noise emission standard standard for determining the noise emission of machinery and equipment in such a way as to obtain reliable, reproducible results with a

43、specified grade of accuracy 3.3 noise test code see EN ISO 12001:1997 standard that is applicable to a particular class, family or type of machinery or equipment which specifies all the information necessary to carry out efficiently the determination, declaration and verification of the noise emissi

44、on characteristics under standardized conditions 3.4 emission sound pressure, p, in pascals see EN ISO 4871:1996 sound pressure, at a specified position near a noise source, when the source is in operation under specified operating and mounting conditions on a reflecting plane surface, in the absenc

45、e of background noise and of reflections from room surfaces other than the plane on which the machine under test is placed 3.5 emission sound pressure level, Lp, in decibels see EN ISO 4871:1996 ten times the logarithm to the base 10 of the ratio of the square of the emission sound pressure, p2(t) t

46、o the square of the reference sound pressure po2, measured with a particular time weighting and a particular frequency weighting, selected from those defined in EN 61672-1. The reference sound pressure is 20 Pa 3.6 sound power, W, in watts see EN ISO 4871:1996 rate per unit time at which airborne so

47、und energy is radiated by a source 3.7 sound power level, LW, in decibels see EN ISO 4871:1996 ten times the logarithm to the base 10 of the ratio of the sound power radiated by the source under test to the reference sound power, determined with a particular frequency weighting or in a particular fr

48、equency band. The reference sound power is 1 pW (1 pW = 10-12W) 3.8 noise emission value see EN ISO 4871:1996 value of the sound power level, LW, or the emission sound pressure level, Lp, determined from measurements 3.9 declared dual-number noise emission value, L and K value of the measured A-weig

49、hted sound power level, LWA, the A-weighted time-averaged emission sound pressure level, LpA, or the C-weighted peak emission sound pressure level, LpCpeak, and K, the related uncertainty. (L + K) indicate the statistical upper limit below which the measured noise emission value of the individual machine or equipment are projected to lie when the mach