EN 12571-1998 en Materials and Articles in Contact with Foodstuffs - Transport Units for Catering Containers Containing Prepared Foodstuffs - Thermal and Hygienic Requirements and .pdf

《EN 12571-1998 en Materials and Articles in Contact with Foodstuffs - Transport Units for Catering Containers Containing Prepared Foodstuffs - Thermal and Hygienic Requirements and .pdf》由会员分享，可在线阅读，更多相关《EN 12571-1998 en Materials and Articles in Contact with Foodstuffs - Transport Units for Catering Containers Containing Prepared Foodstuffs - Thermal and Hygienic Requirements and .pdf（9页珍藏版）》请在麦多课文档分享上搜索。

1、 STD-BSI BS EN L2571-ENGL 1777 Lb2LibbS 077b9Lb 710 D BRITISH STANDARD Materials and articles in contact with foodstuffs - Transport units for catering containers containing prepared foodstuffs - Thermal and hygienic requirements and testing The European Standard EN 12571:1998 has the status of a Br

2、iish Standard ICs 67.250 BS EN 12571:1999 rnl n-m U- NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW u m BS EN 12571:1999 been prepared under the direction of the Consumer Amd.No. Date Products and Services Sector Committee, was published under the authority of the Standards C

3、ommittee and comes into effect on 15 May 1999 O BCI 05-1999 ISBN O 680 32101 O National foreword Text affected This British Standard is the English language version of EN 12571: 1998. The UK participation in its preparation was entrusted to Technical Committee CWD, Cooking and catering containers, w

4、hich has the responsibility to: - aid enquirers to understand the text; - present to the responsible European committee any enquiries on the - monitor related international and European developments and promulgate inteqxetation, or proposals for change, and keep the UK interests informed; them in th

5、e UK A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “I

6、nternational Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance wit

7、h a British Standard does not of itself confer immunity from legal obligations. . Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 6, an inside back cover and a back cover. STD-BSI BS EN 12571-ENGL 1777 D Lb2Libb7 077b718 573 D EUROPEAN STA

8、NDARD EN 12571 NORME EUROPENNE EUROP - shall not contribute to the contamination of foodstuffs or have any advem influence on the foodstuffs. 4.2 Design and construction 4.2.1 General All surfaces including ail removable parts, when fitted, shall be accessible for cleaning and disinfection. Moreover

9、, their assembly shall allow liquids to drain off completely from the outside of the transport unit (in an inclined position, if necessary); if this is impmticable due to weight restrictions, an effective drajnage system shall be provided. O BSI 05-1999 Page 4 EN i2571:1998 Thermal class A B C Condi

10、tion Behaviour of temperature Hot 5 10 K decrease Cold 5 4Kincrease Deep frozen 5 4 K increase I For the cold condition, the temperature of the contents shail remain within +3 OC and +7 OC. These requirements SM be verified by use of the tests described in clause 6. 5 I#?st of thermal characteristic

11、s 5.1 Test conditions iansport units shall be preconditioned at an average ambient temperature of (25 0,5) OC, with a maximum dispersion of 2 OC. This temperature is the arithmetic mean of the temperatures of two probes located at OJO m from the geometric centre of the inner surfaces of two extemal

12、aacent walls of the transport uni$ it shall be placed at least 0,20 m from the ground. The tests shall be carried out in stiil air defined by a stirring up rate between loh and 20h. NOTE Stimng-up rate = air flow (m3/h)h0iume of the test room (m3), measured in normal atmospheric conditions. For insu

13、lated transport units with additional thermal maintenance, the additional thermal maintenance means shall be fitted in accordance with the manufacturers requirements as given in the instruction handbook before starting the measurement. 6.2 Preparation The transport unit shall be loaded in such a way

14、 that the ratio between the volume of the test load and the inner volume of the transport unit is equal to (50 f 5) %. If not otherwise stated, the test medium shall be water. For the test load, a minimum number of catering containers - made of stainless steel - shall be used. The containers shall h

15、ave the same size and the test load shall be distributed equally. The catering containers filled with the test medium and their lids shall be preconditioned at a temperature of a) 2 OC higher than the initial reference temperature (see 6.3), with a maximum dispersion of 1 OC, for hot conditions; b)

16、2 OC lower than the initial reference temperature (see 6.3), with a maximum dispersion of 0,5 OC, for cold conditions and for deep frozen conditions. The measuring test points shall be located at the geometrical centre of the test load of each catering container. Immediately prior to the measurement

17、, the transport unit shail be closed. 6.3 Measurement The measuring points sha be located at the geometrid centre of the test load of each catering container. The accuracy of the temperam measurement instruments shail be 5 0,5 K. The lids and doors of the transport unit shall be kept closed during t

18、he test. a) Hot conditions - Initkd reference temperature: 75 OC - Final reference temperature: 5 “C - Initial reference temperature: 3 OC - Fnai reference temperature: 7 OC b) Cold conditions c) Deep frozen condition The tests shall be carried out with diiuted glycol (50 % glycol, 50 % water) inste

19、ad of water. - Initial reference temperature: -22 OC - Final reference temperature: - 18 OC The test results are positive if the temperatures of the contents of all catering containers remain within the indicated values (see 4.3) during the test time of 3 h. O BSI O51999 STDmBSI BS EN 12571-ENGL 177

20、9 1b24bb7 077b722 TZ4 Page 5 EN 12571:1998 6 Verification of hygiene requirements Veridon of compliance with hygiene requirements shail be undertaken by: a) visual inspection, b) check of material specification, c) measurement (e.g. temperature, surface roughness), d) practicai and functional tests,

21、 where appropriate. 7 operathg instructions Each transport unit shail be supplied with operating instructions. These instructions shall be brief and easily comprehensible. They shall contain at least the following: a) guidance on how to maintain the necessary level of hygiene e.g. cleaning of the di

22、fferent areas; this guidance should set out criteria e.g. how often and when this procedure has to take place, which detergents andor disinfectants may and may not be used; b) guidance on how to ensure correct functioning of the unit during transportation and also of ali its elements e.g. seais, hin

23、ges and their interfaces by appropriate checksat random; c) guidance on installation, where necessary, and putting into operation for the first time; d) advice on how to proceed in case of mafunction; e) recommendations (e.g. temperature range) for regular maintenance and cleaning to keep the equipm

24、ent in good condition; f) maximum loading (kilograms and litres); g) temperature range for use according to thermal class (see 4.3 and 5.3); h) guidance on how to prepare and handle the transport unit to comply with the requirements of the thermal classes; i) guidance on how to ensure the safety of

25、the user. 8Marking Each transport unit shall be legibly and indelibly marked externally with at least the following: a) the suppliers name or other means of identification; b) the number of this European Standard EN 12571:19981); c) thermal classes; d) thermal range for use and maximum cleaning temp

26、erature. NOTE 1 Additional information about product properties can be helpful for the proper use of the transport unit NOTE 2 Other compulsory information may be required by national legislation. ) Such marking is a claim of compliance with EN 12571:1998 but does not imply CEN approval of the produ

27、ct; the accuracy of this claim is therefore solely the responsibility of the person applying the marking. O BSI O51999 STD-BSI BS EN L257L-ENGL 1979 1b24bb7 077b723 750 Page 6 EN 12671:1998 Annex A (informative) Hazards Hazards can arise from: a) microbiological causes due to pathogens, spoilage mic

28、ro-organism or tob, b) chemical causes including those from cleaning and disinfecting materials; c) foreign bodies arising from raw materials, equipment or other sources; d) variations of temperature of the foodstuff during storage andor transportation; e) incorrect handling of the transport unit an

29、d catering containem. Annex B (informative) Bibliography Directive of the Commission (82/711/EEC) of 18 October 1982 concerning Plastics: Basic rules for testing migration. Directive of the Commission (85/572/EEC) of 19 December 1985 concerning Plastics: List of simular& for testing migration. Direc

30、tive of Council (89/108/EEC) of 21 December 1988 on the approximation of the laws of Member States relating to quick-frozen foodstuffs for human consumption Directive of Council (9/109/EEC) of 21 December 1988 on the approximation of the laws of Member States relating to materials and articles inten

31、ded to come int contact with foodstuffs. Directive of the Commission (90/128/EEC) of 23 February 1990 relating to plastics materials and articles intended to come into contact with foodstuffs. Directive of the Commission (92B9/EEC) of 14 May 1992 amending Directive 90/128/EEC relating to plastics ma

32、terials and articles intended to come into contact with foodstuffs. Directive of the Commission (93kVEEC) of 15 March 1993 concerning Plastics: Rules for high temperature testing. Directive of the Commission (93/9EEC) of 15 March 1993 concerning Plastic Monomeis 2nd Amendment. Council directive (93/

33、43/EEC) of 14 June 1993 on the hygiene of foodstuffs. Directive (93/WEC) and Decision of Council of 22 July 1993, relating to EC marking. Directive of the Commission (95/3/EEC) of 14 February 1995 relating to materials and articles intended to come into contact with foodstuffs. EN 4414, Refrigmtetl

34、display cabinets - Geneml test conitions. EN 1672-2, Food pce.ssing mhinery - Safety and Hygiene requimts - Basic conqts - Hygiene requirements. Agreement on the International Carriage of Perishable Foodstuffs and on the Special Equipment to be Used for Such Carriage (ATP). O BSI 05-1999 - STD-BSI B

35、S EN 12571-ENGL 1999 1b2LibbY 077b724 877 m BS EN 12571:1999 BSI 389 Chiswick High Road London w4 4AL BSI - British Standards Institution BSI is the independent national body responsible for preparing British Stanhds. It presents the UK view on standards in Europe and at the international level. It

36、is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful

37、 if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 0181 996 9OOO. Fax: O181 996 7400. BSI offers members an individual updating service c

38、alled PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 0181 996 7000. Fax: O181 996 7001. In response to orders for internat

39、ional standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Techn

40、ical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel O181 996 7111. Fax: O181 996 7048. Subscribing members of BSI are kept up to date with standards developments and re

41、ceive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Adrninktmtion. Tel: O181 996 7002. Fax: O181 996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the

42、international standardkon bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means - electronic, photocopying, recording or otherwise - without prior written permission from BSI

43、. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel O181 996 7070.