EN 12397-2017 en Safety requirements for cableway installations designed to carry persons - Operation《载人索道装置的安全要求-运行》.pdf

《EN 12397-2017 en Safety requirements for cableway installations designed to carry persons - Operation《载人索道装置的安全要求-运行》.pdf》由会员分享，可在线阅读，更多相关《EN 12397-2017 en Safety requirements for cableway installations designed to carry persons - Operation《载人索道装置的安全要求-运行》.pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Safety requirements for cableway installations designed to carry persons - OperationBS EN 12397:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12397 March 2017 ICS 45.100 Supersedes EN 12397:2004English Versio

2、n Safety requirements for cableway installations designed to carry persons - Operation Prescriptions de scurit pour les installations cbles transportant des personnes - Exploitation Sicherheitsanforderungen an Seilbahnen fr den Personenverkehr - Betriebe This European Standard was approved by CEN on

3、 24 November 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards m

4、ay be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified

5、 to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Icelan

6、d, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC

7、 Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12397:2017 ENational forewordThis British Standard is the UK implementation of BS EN 12397:2017. It supersedes BS EN 12397:2

8、004, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee MCE/20, Aerial ropeways.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of

9、a contract. Users are responsible for its correct application.ISBN 978 0 580 78523 8ICS 45.100Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2017.Amen

10、dments/corrigenda issued since publicationDate Text affected BRITISH STANDARDBS EN 12397:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12397 March 2017 ICS 45.100 Supersedes EN 12397:2004English Version Safety requirements for cableway installations designed to carry persons - Operation P

11、rescriptions de scurit pour les installations cbles transportant des personnes - Exploitation Sicherheitsanforderungen an Seilbahnen fr den Personenverkehr - Betriebe This European Standard was approved by CEN on 24 November 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulat

12、ions which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

13、 This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN

14、members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Po

15、rtugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitatio

16、n in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12397:2017 EBS EN 12397:2017EN 12397:2017 (E) 2 Contents Page European foreword4 1 Scope .6 2 Normative references .6 3 Terms and definitions 6 4 General requirements 7 4.1 Application of this standard .7 4.2 Saf

17、ety principles .7 4.2.1 General 7 4.2.2 Hazard factors .7 4.2.3 Safety measures 7 4.2.4 Safety of workers 8 5 Operating arrangements 9 5.1 Preliminary notes .9 5.2 Operating personnel and tasks 9 5.2.1 General 9 5.2.2 Tasks of the head of operation .9 5.2.3 Tasks of the operator. 10 5.2.4 Tasks of t

18、he other operating personnel . 11 5.2.5 Requirements for the operating personnel 11 5.3 Operation . 11 5.3.1 Operation under normal conditions . 11 5.3.2 Operation under exceptional circumstances . 12 5.4 Operating checks . 12 5.5 Operating disruptions . 12 5.5.1 General . 13 5.5.2 Abnormal situatio

19、ns and incidents . 13 5.5.3 Prolonged stoppage . 13 5.5.4 Accidents 13 5.6 Information and signage for passengers 13 5.7 Documents . 13 5.8 Fire prevention and fire-fighting 14 6 Passenger arrangements . 14 6.1 General . 14 6.2 Terms of access and transportation . 15 6.2.1 General . 15 6.2.2 Disable

20、d passengers 15 6.2.3 Ski and leisure equipment, luggage, miscellaneous items and animals . 15 6.2.4 Exclusions 15 6.3 Passenger behaviour . 15 6.3.1 General . 15 6.3.2 Basic rules 16 6.3.3 Special rules . 16 6.4 Accidents and incidents during operation . 17 BS EN 12397:2017EN 12397:2017 (E) 3 Annex

21、 ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2000/9/EC relating to cableway installations designed to carry persons . 18 BS EN 12397:2017EN 12397:2017 (E) 4 European foreword This document (EN 12397:2017) has been prepared by Technical

22、Committee CEN/TC 242 “Safety requirements for passenger transportation by rope”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2017, and conf

23、licting national standards shall be withdrawn at the latest by September 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This do

24、cument supersedes EN 12397:2004. This document has been prepared under a mandate given to the CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s) 2000/9/EC. For relationship with EU Directive 2000/9/EC, see informative Annex

25、ZA, which is an integral part of this document. The most significant changes compared to the previous edition of EN 12397 are as follows: For subclause 4.2.2 Hazard factors: addition of a hazard factor: “insufficient or inappropriate additional measure in the event of a fault indicated by the monito

26、ring or communications equipment.” For subclause 4.2.4 Occupational safety: reorganisation of the provisions applicable to occupational safety. Removal of subclauses 5.4.2 and 5.6 and creation of a specific section which defines the principles of a risk prevention process (risk identification/risk a

27、ssessment/implementation of preventive measures) and identifies the key risks encountered when operating ski lifts from workstations. For subclause 5.2.2 Role of the operations manager: addition of a role relating to the consideration of environmental requirements with regard to operations. For subc

28、lause 5.2.3 Role of the driver: addition of the option, when drivers are not busy performing driving duties, for them to act as monitors for the loading and unloading of passengers. For subclause 5.4 Operational inspections: removal of provisions on maintenance which belong to a different standard.

29、For subclause 5.8 Preventing and fighting fire: addition of a section. For subclause 6.2.3 Ski and leisure tow systems, luggage, miscellaneous items and animals: removal of detailed rules and definition of a general principle which gives the operations manager scope to make the transport arrangement

30、s. For subclause 6.3 Passenger behaviour: amendment of the wording on the form. The previous version was intended for passengers; the new wording is aimed at operators. This document forms part of the standards program adopted by the CEN Technical Committee on safety requirements for cableway instal

31、lations designed to carry persons. This programme includes the following standards: EN 1907, Safety requirements for cableway installations designed to carry persons Terminology; BS EN 12397:2017EN 12397:2017 (E) 5 EN 12929 (all parts), Safety requirements for cableway installations designed to carr

32、y persons General requirements; EN 12930, Safety requirements for cableway installations designed to carry persons Calculations; EN 12927 (all parts), Safety requirements for cableway installations designed to carry persons Ropes; EN 1908, Safety requirements of cableway installations designed to ca

33、rry persons Tensioning devices; EN 13223, Safety requirements for cableway installations designed to carry persons Drive systems and other mechanical equipment; EN 13796 (all parts), Safety requirements for cableway installations designed to carry persons Carriers; EN 13243, Safety requirements for

34、cableway installations designed to carry persons Electrical equipment other than for drive systems; EN 13107, Safety requirements for cableway installations designed to carry persons Civil engineering works; EN 1709, Safety requirements for cableway installations designed to carry persons Precommiss

35、ioning inspection, maintenance, operational inspection and checks; EN 1909, Safety requirements for cableway installations designed to carry persons Recovery and evacuation; EN 12397, Safety requirements for cableway installations designed to carry persons Operation; EN 12408, Safety requirements fo

36、r cableway installations designed to carry persons Quality assurance. Together, these standards govern the design, manufacturing, production, maintenance and operation of all cableway installations designed to carry persons. With regard to surface lifts, the production of this document drew on the w

37、ork of the international cableway organisation (Organisation Internationale des Transports Cbles OITAF). According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to announce this European Standard: Austria, Belgium, Bulgaria, Croati

38、a, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey

39、 and the United Kingdom. BS EN 12397:2017EN 12397:2017 (E) 6 1 Scope This European Standard specifies the safety requirements applicable to the operation of installations for passenger transportation by cable. This standard is applicable to the various types of installations and takes into account t

40、heir environment. This European Standard applies to the operation of an installation and to the passenger transport conditions and also contains requirements for passengers. It is applicable to individual installations or a set of installations. It does not cover legal provisions for the transport s

41、ervice nor transport obligations. It includes requirements relating to the prevention of accidents and protection for workers, as well as to fire prevention and fire-fighting, without affecting the application of national requirements relating to construction law or statutory law, or to the protecti

42、on of specific groups of people. It does not apply to installations for the transportation of goods nor to lifts. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the

43、 edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1709, Safety requirements for cableway installations designed to carry persons Precommissioning inspection, maintenance and operational inspection and checks. EN 1907,

44、 Safety requirements for cableway installations designed to carry persons Terminology. EN 1908, Safety requirements for cableway installations designed to carry persons Tensioning devices. EN 1909, Safety requirements for cableway installations designed to carry persons Recovery and evacuation. EN 1

45、2408, Safety requirements for cableway installations designed to carry persons Quality assurance. EN 12927 (all parts), Safety requirements for cableway installations designed to carry persons Ropes. EN 12929 (all parts), Safety requirements for cableway installations designed to carry persons Gener

46、al requirements. EN 12930, Safety requirements for cableway installations designed to carry persons Calculations. EN 13107, Safety requirements for cableway installations designed to carry persons Civil engineering works. EN 13223, Safety requirements for cableway installations designed to carry per

47、sons Drive systems and other mechanical equipment. EN 13243, Safety requirements for cableway installations designed to carry persons Electrical equipment other than for drive systems. EN 13796 (all parts), Safety requirements for cableway installations designed to carry persons Carriers. 3 Terms an

48、d definitions For the purposes of this document, the terms and definitions given in EN 1907 and the following apply. BS EN 12397:2017EN 12397:2017 (E) 7 3.1 operator operating attendant tasked with examining the condition and performing the maintenance of the installation 4 General requirements 4.1

49、Application of this standard The requirements of this European Standard apply to all installations together with those of European Standards EN 1709, EN 1908, EN 1909, EN 12408, EN 12927 (all parts), EN 12929 (all parts), EN 12930, EN 13107, EN 13223, EN 13243 and EN 13796 (all parts). 4.2 Safety principles 4.2.1 General The safety principles set out in EN 12929-1 apply. In addition the following hazard factors and safety requirements relative to the scope of this Eu