EN 12309-7-2014 en Gas-fired sorption appliances for heating and or cooling with a net heat input not exceeding 70 kW - Part 7 Specific provisions for hybrid appliances《用于加热和 或冷却的气.pdf

《EN 12309-7-2014 en Gas-fired sorption appliances for heating and or cooling with a net heat input not exceeding 70 kW - Part 7 Specific provisions for hybrid appliances《用于加热和 或冷却的气.pdf》由会员分享，可在线阅读，更多相关《EN 12309-7-2014 en Gas-fired sorption appliances for heating and or cooling with a net heat input not exceeding 70 kW - Part 7 Specific provisions for hybrid appliances《用于加热和 或冷却的气.pdf（30页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 12309-7:2014Gas-fired sorption appliancesfor heating and/or cooling witha net heat input not exceeding70 kWPart 7: Specific provisions for hybridappliancesBS EN 12309-7:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 12309-7:2

2、014.Together with BS EN 12309-1:2014, BS EN 12309-3:2014, BS EN 12309-4:2014, BS EN 12309-5:2014 and BS EN 12309-6:2014, itsupersedes BS EN 12309-2:2000, which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee GSE/37, Gas fired sorption and laundering appliance

3、s.A list of organizations represented on this committee can be obtainedon request to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standa

4、rds Limited 2015ISBN 978 0 580 78699 0ICS 27.080; 91.140.30Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 31 January 2015.Amendments/corrigenda issued since publ

5、icationDate Text affectedEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORM EN 12309-7 December 2014 ICS 27.080; 91.140.30 Supersedes EN 12309-2:2000English Version Gas-fired sorption appliances for heating and/or cooling with anet heat input not exceeding 70 kW - Part 7: Specific provisionsfor hybrid

6、appliances Appareils sorption fonctionnant au gaz pour le chauffageet/ou le refroidissement de dbit calorifique sur PCI infrieurou gal 70 kW - Partie 7 : Dispositions spcifiques pourles appareils hybrides Gasbefeuerte Sorptions-Gerte fr Heizung und/oderKhlung mit einer Nennwrmebelastung nicht ber 70

7、 kW -Teil 7: Spezifische Bestimmungen fr Hybridanlagen This European Standard was approved by CEN on 18 October 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without an

8、y alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other languag

9、e made by translationunder the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the samestatus as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Es

10、tonia,Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and UnitedKingdom. EUROPEAN COMMITTEE FOR STAND

11、ARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNGCEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members. Ref. No. EN 12309-7:2014 EBS EN 12309-7:2014EN 12309-7

12、:2014 (E) 2 Contents Page Foreword 3 1 Scope 5 1.1 Scope of EN 12309 .5 1.2 Scope of this Part 7 of EN 12309 5 2 Normative references 6 3 Terms and definitions .6 4 Test conditions 6 4.1 General 6 4.2 Inlet temperatures of the indoor heat exchanger .8 4.3 Inlet temperatures into the outdoor heat exc

13、hanger .9 4.3.1 Air to water hybrid heating appliance9 4.3.2 Ground water sourced hybrid heating appliances 10 4.3.3 Ground heat sourced hybrid heating appliances 10 4.3.4 Solar sourced hybrid heating appliances 10 5 Calculation of the seasonal performance in the heating mode . 11 6 Standard rating

14、conditions of gas driven sorption heat pump based hybrid heating appliances . 11 Annex A (informative) Estimation of the heating fluid inlet and outlet temperature into/out of the indoor heat exchanger . 14 Annex B (informative) Inlet temperature into the outdoor heat exchanger for ground heat sourc

15、ed sorption heat pump based hybrid heating appliances 15 Annex C (informative) Inlet temperature into the outdoor heat exchanger for solar sourced sorption heat pump based hybrid heating appliances . 17 Annex D (informative) Inlet temperature of the outdoor heat exchanger for solar collector assiste

16、d sorption heat pump based hybrid heating appliances 18 D.1 Introduction . 18 D.2 Solar-assisted ground sourced gas-driven sorption heat pumps . 18 D.3 Solar-assisted air sourced gas-driven sorption heat pumps . 18 Annex E (informative) Calculation of the seasonal gas utilization efficiency with par

17、tial heat demand coverage by the applied solar collectors 19 Annex F (informative) Estimation of the seasonal performance of hybrid heating appliances at building design loads deviating from the appliances nominal heating capacity 20 Annex G (normative) Calculation of the seasonal space heating ener

18、gy efficiency for hybrid gas-driven sorption heat pump based heating appliances . 21 Annex ZA (informative) Relationship between this European Standard and the requirements of Commission Regulation (EC) No 813/2013 24 Annex ZB (informative) Relationship between this European Standard and the require

19、ments of Commission Regulation (EC) No 811/2013 25 Bibliography . 26 BS EN 12309-7:2014EN 12309-7:2014 (E) 2 Contents Page Foreword 3 1 Scope 5 1.1 Scope of EN 12309 .5 1.2 Scope of this Part 7 of EN 12309 5 2 Normative references 6 3 Terms and definitions .6 4 Test conditions 6 4.1 General 6 4.2 In

20、let temperatures of the indoor heat exchanger .8 4.3 Inlet temperatures into the outdoor heat exchanger .9 4.3.1 Air to water hybrid heating appliance9 4.3.2 Ground water sourced hybrid heating appliances 10 4.3.3 Ground heat sourced hybrid heating appliances 10 4.3.4 Solar sourced hybrid heating ap

21、pliances 10 5 Calculation of the seasonal performance in the heating mode . 11 6 Standard rating conditions of gas driven sorption heat pump based hybrid heating appliances . 11 Annex A (informative) Estimation of the heating fluid inlet and outlet temperature into/out of the indoor heat exchanger .

22、 14 Annex B (informative) Inlet temperature into the outdoor heat exchanger for ground heat sourced sorption heat pump based hybrid heating appliances 15 Annex C (informative) Inlet temperature into the outdoor heat exchanger for solar sourced sorption heat pump based hybrid heating appliances . 17

23、Annex D (informative) Inlet temperature of the outdoor heat exchanger for solar collector assisted sorption heat pump based hybrid heating appliances 18 D.1 Introduction . 18 D.2 Solar-assisted ground sourced gas-driven sorption heat pumps . 18 D.3 Solar-assisted air sourced gas-driven sorption heat

24、 pumps . 18 Annex E (informative) Calculation of the seasonal gas utilization efficiency with partial heat demand coverage by the applied solar collectors 19 Annex F (informative) Estimation of the seasonal performance of hybrid heating appliances at building design loads deviating from the applianc

25、es nominal heating capacity 20 Annex G (normative) Calculation of the seasonal space heating energy efficiency for hybrid gas-driven sorption heat pump based heating appliances . 21 Annex ZA (informative) Relationship between this European Standard and the requirements of Commission Regulation (EC)

26、No 813/2013 24 Annex ZB (informative) Relationship between this European Standard and the requirements of Commission Regulation (EC) No 811/2013 25 Bibliography . 26 BS EN 12309-7:2014EN 12309-7:2014 (E) 3 Foreword This document (EN 12309-7:2014) has been prepared by Technical Committee CEN/TC 299 “

27、Gas-fired sorption appliances, indirect fired sorption appliances, gas-fired endothermic engine heat pumps and domestic gas-fired washing and drying appliances”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of

28、 an identical text or by endorsement, at the latest by June 2015, and conflicting national standards shall be withdrawn at the latest by June 2015. This document supersede EN 12309-2:2000. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent r

29、ights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relation

30、ship with EU Directive(s), see informative Annex ZA and Annex ZB, which are integral parts of this document. This standard comprises the following parts under the general title, Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW: Part 1: Terms and defi

31、nitions; Part 2: Safety; Part 3: Test conditions; Part 4: Test methods; Part 5: Requirements; Part 6: Calculation of seasonal performances; Part 7: Specific provisions for hybrid appliances; Part 8: Environmental aspects. EN 12309-1 and EN 12309-2 supersede EN 12309-1:1999, whereas EN 12309-1, EN 12

32、309-3, EN 12309-4, EN 12309-5, EN 12309-6, and EN 12309-7 supersede EN 12309-2:2000. EN 12309-1, EN 12309-2, EN 12309-3, EN 12309-4, EN 12309-5, EN 12309-6, and EN 12309-7 have been prepared to address the essential requirements of the European Directive 2009/142/EC relating to appliances burning ga

33、seous fuels (see Annex ZA of prEN 12309-2:2013 for safety aspects and Annex ZA of EN 12309-5:2014 for rational use of energy aspects). These documents are linked to the Energy Related Products Directive (2009/125/EC) in terms of tests conditions, tests methods and seasonal performances calculation m

34、ethods under Mandate M/495 (see EN 12309-3:2014, Annex ZA; EN 12309-4:2014, Annex ZA; EN 12309-6:2014, Annex ZA and EN 12309-7:2014, Annex ZA and prEN 12309-2:2013, Annex ZB and EN 12309-5:2014, Annex ZB). These documents will be reviewed whenever new mandates could apply. BS EN 12309-7:2014EN 12309

35、-7:2014 (E) 4 EN 12309-8 (“Environmental aspects”) deals with the incorporation of the Resolution BT 27/2008 regarding CEN approach on addressing environmental issues in product and service standards. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the foll

36、owing countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,

37、Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 12309-7:2014EN 12309-7:2014 (E) 4 EN 12309-8 (“Environmental aspects”) deals with the incorporation of the Resolution BT 27/2008 regarding CEN approach on addressing environmental

38、issues in product and service standards. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yu

39、goslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 12309-7:2014EN 12309-7:2014 (E) 5 1 Scop

40、e 1.1 Scope of EN 12309 Appliances covered by this European Standard include one or a combination of the following: gas-fired sorption chiller; gas-fired sorption chiller/heater; gas-fired sorption heat pump. This European Standard applies to appliances designed to be used for space heating or cooli

41、ng or refrigeration with or without heat recovery. This European Standard applies to appliances having flue gas systems of type B and C (according to CEN/TR 1749) and to appliances designed for outdoor installations. EN 12309 does not apply to air conditioners, it only applies to appliances having:

42、integral burners under the control of fully automatic burner control systems, closed system refrigerant circuits in which the refrigerant does not come into direct contact with the water or air to be cooled or heated, mechanical means to assist transportation of the combustion air and/or the flue ga

43、s. The above appliances can have one or more primary or secondary functions (i.e. heat recovery - see definitions in EN 12309-1:2014). In the case of packaged units (consisting of several parts), this standard applies only to those designed and supplied as a complete package. The appliances having t

44、heir condenser cooled by air and by the evaporation of external additional water are not covered by EN 12309. Installations used for heating and/or cooling of industrial processes are not within the scope of EN 12309. All the symbols given in this text should be used regardless of the language used.

45、 1.2 Scope of this Part 7 of EN 12309 This part of EN 12309 deals particularly with the specific provisions of hybrid heating appliances based on gas-driven sorption heat pumps as defined in Part 1. The heating appliances covered by this European Standard are of a hybrid type, an encased assembly or

46、 assemblies combining a direct or indirect-fired sorption heat pump for base load and a peak load condensing boiler with only one flue system, electrical supply cable and human machine interface to the end user. The direct- or indirect-fired sorption heat pump integrated in the hybrid appliances in

47、this European Standard could be intermittent or continuously operating ab or adsorption heat pump. The control system of hybrid heating appliances decides on the transition between the heat pump operation mode to/from the mixed operation mode (heating by both sorption heat pump as well as the peak b

48、oiler) and the direct heating mode (only peak boiler) depending on the heating fluid inlet or return temperature, temperature of brine entering the indoor heat exchanger (evaporator) of the heat pump, the required outlet or supply temperature dependent on the outdoor temperature as well as the targe

49、t value of the indoor or room temperature. Upon transition from the heat pump operation mode to the mixed operation mode, the control system decides also on the degree of mixing based on the above mentioned parameters. BS EN 12309-7:2014EN 12309-7:2014 (E) 6 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (inclu