EN 12309-5-2014 en Gas-fired sorption appliances for heating and or cooling with a net heat input not exceeding 70 kW - Part 5 Requirements《用于加热和 或冷却的气体的吸附装置使用净热输入不超过70千瓦 第5部分 必备要求.pdf

《EN 12309-5-2014 en Gas-fired sorption appliances for heating and or cooling with a net heat input not exceeding 70 kW - Part 5 Requirements《用于加热和 或冷却的气体的吸附装置使用净热输入不超过70千瓦 第5部分 必备要求.pdf》由会员分享，可在线阅读，更多相关《EN 12309-5-2014 en Gas-fired sorption appliances for heating and or cooling with a net heat input not exceeding 70 kW - Part 5 Requirements《用于加热和 或冷却的气体的吸附装置使用净热输入不超过70千瓦 第5部分 必备要求.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 12309-5:2014Gas-fired sorption appliancesfor heating and/or cooling witha net heat input not exceeding70 kWPart 5: RequirementsBS EN 12309-5:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 12309-5:2014.Together with BS EN 1230

2、9-1:2014, BS EN 12309-3:2014, BS EN 12309-4:2014, BS EN 12309-6:2014 and BS EN 12309-7:2014, itsupersedes BS EN 12309-2:2000, which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee GSE/37, Gas fired sorption and laundering appliances.A list of organizations re

3、presented on this committee can be obtainedon request to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 5

4、80 78697 6ICS 27.080; 91.140.30Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 31 January 2015.Amendments/corrigenda issued since publicationDate Text affectedEUR

5、OPEAN STANDARDNORME EUROPENNEEUROPISCHE NORM EN 12309-5 December 2014 ICS 27.080; 91.140.30 Supersedes EN 12309-2:2000English Version Gas-fired sorption appliances for heating and/or cooling with anet heat input not exceeding 70 kW - Part 5: Requirements Appareils sorption fonctionnant au gaz pour l

6、e chauffageet/ou le refroidissement de dbit calorifique sur PCI infrieurou gal 70 kW - Partie 5: Exigences Gasbefeuerte Sorptions-Gerte fr Heizung und/oderKhlung mit einer Nennwrmebelastung nicht ber 70 kW -Teil 5: Anforderungen This European Standard was approved by CEN on 18 October 2014. CEN memb

7、ers are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application

8、 to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

9、 Centre has the samestatus as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithu

10、ania,Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and UnitedKingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNGCEN-CENELEC Management Centre: Avenue Marnix 17, B-100

11、0 Brussels 2014 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members. Ref. No. EN 12309-5:2014 EBS EN 12309-5:2014EN 12309-5:2014 (E) 2 Contents Page Foreword 3 1 Scope 5 1.1 Scope of EN 12309 .5 1.2 Scope of this Part 5 of EN 12309 5 2 Normative ref

12、erences 5 3 Terms and definitions .6 4 Requirements .6 4.1 Cooling capacity rating and energy performance 6 4.1.1 Primary functions 6 4.1.2 Secondary functions .6 4.1.3 Efficiency requirements 7 4.2 Heating capacity rating and energy performance 7 4.2.1 Primary functions 7 4.2.2 Secondary functions

13、.7 4.2.3 Efficiency requirements 7 5 Marking and instructions 8 5.1 Data plate 8 5.2 Technical instructions for installation and adjustment .8 5.2.1 General 8 5.2.2 Cooling mode .8 5.2.3 Heating mode .9 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements

14、 of EU Directive 2009/142/EC relating to appliances burning gaseous fuels (Gas Appliances Directive) 10 Annex ZB (informative) Relationship between this European Standard and the requirements of Commission Regulation (EC) No 813/2013 11 Annex ZC (informative) Relationship between this European Stand

15、ard and the requirements of Commission Regulation (EC) No 811/2013 12 Bibliography . 13 BS EN 12309-5:2014EN 12309-5:2014 (E) 2 Contents Page Foreword 3 1 Scope 5 1.1 Scope of EN 12309 .5 1.2 Scope of this Part 5 of EN 12309 5 2 Normative references 5 3 Terms and definitions .6 4 Requirements .6 4.1

16、 Cooling capacity rating and energy performance 6 4.1.1 Primary functions 6 4.1.2 Secondary functions .6 4.1.3 Efficiency requirements 7 4.2 Heating capacity rating and energy performance 7 4.2.1 Primary functions 7 4.2.2 Secondary functions .7 4.2.3 Efficiency requirements 7 5 Marking and instructi

17、ons 8 5.1 Data plate 8 5.2 Technical instructions for installation and adjustment .8 5.2.1 General 8 5.2.2 Cooling mode .8 5.2.3 Heating mode .9 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2009/142/EC relating to appliances burnin

18、g gaseous fuels (Gas Appliances Directive) 10 Annex ZB (informative) Relationship between this European Standard and the requirements of Commission Regulation (EC) No 813/2013 11 Annex ZC (informative) Relationship between this European Standard and the requirements of Commission Regulation (EC) No

19、811/2013 12 Bibliography . 13 BS EN 12309-5:2014EN 12309-5:2014 (E) 3 Foreword This document (EN 12309-5:2014) has been prepared by Technical Committee CEN/TC 299 “Gas-fired sorption appliances, indirect fired sorption appliances, gas-fired endothermic engine heat pumps and domestic gas-fired washin

20、g and drying appliances”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2015, and conflicting national standards shall be withdrawn at the latest by

21、 June 2015. This document supersede EN 12309-2:2000. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared u

22、nder a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, Annex ZB and Annex ZC, which are integral parts of this document. This standard com

23、prises the following parts under the general title, Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW: Part 1: Terms and definitions; Part 2: Safety; Part 3: Test conditions; Part 4: Test methods; Part 5: Requirements; Part 6: Calculation of seasonal

24、performances; Part 7: Specific provisions for hybrid appliances; Part 8: Environmental aspects. EN 12309-1 and EN 12309-2 supersede EN 12309-1:1999, whereas EN 12309-1, EN 12309-3, EN 12309-4, EN 12309-5, EN 12309-6, and EN 12309-7 supersede EN 12309-2:2000. EN 12309-1, EN 12309-2, EN 12309-3, EN 12

25、309-4, EN 12309-5, EN 12309-6, and EN 12309-7 have been prepared to address the essential requirements of the European Directive 2009/142/EC relating to appliances burning gaseous fuels (see Annex ZA of prEN 12309-2:2013 for safety aspects and Annex ZA of EN 12309-5:2014 for rational use of energy a

26、spects). These documents are linked to the Energy Related Products Directive (2009/125/EC) in terms of tests conditions, tests methods and seasonal performances calculation methods under Mandate M/495 (see EN 12309-3:2014, Annex ZA; EN 12309-4:2014, Annex ZA; EN 12309-6:2014, Annex ZA and EN 12309-7

27、:2014, Annex ZA and prEN 12309-2:2013, Annex ZB and EN 12309-5:2014, Annex ZB). These documents will be reviewed whenever new mandates could apply. BS EN 12309-5:2014EN 12309-5:2014 (E) 4 EN 12309-8 (“Environmental aspects”) deals with the incorporation of the Resolution BT 27/2008 regarding CEN app

28、roach on addressing environmental issues in product and service standards. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, De

29、nmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 12309-

30、5:2014EN 12309-5:2014 (E) 4 EN 12309-8 (“Environmental aspects”) deals with the incorporation of the Resolution BT 27/2008 regarding CEN approach on addressing environmental issues in product and service standards. According to the CEN-CENELEC Internal Regulations, the national standards organizatio

31、ns of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,

32、 Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 12309-5:2014EN 12309-5:2014 (E) 5 1 Scope 1.1 Scope of EN 12309 Appliances covered by this standard include one or a combination of the following: gas-fired sorption

33、chiller; gas-fired sorption chiller/heater; gas-fired sorption heat pump. This European Standard applies to appliances designed to be used for space heating or cooling or refrigeration with or without heat recovery. This European Standard applies to appliances having flue gas systems of type B and t

34、ype C (according to CEN/TR 1749) and to appliances designed for outdoor installations. EN 12309 does not apply to air conditioners, it only applies to appliances having: integral burners under the control of fully automatic burner control systems, closed system refrigerant circuits in which the refr

35、igerant does not come into direct contact with the water or air to be cooled or heated, mechanical means to assist transportation of the combustion air and/or the flue gas. The above appliances can have one or more primary or secondary functions (i.e. heat recovery - see definitions in EN 12309-1:20

36、14). In the case of packaged units (consisting of several parts), this European Standard applies only to those designed and supplied as a complete package. The appliances having their condenser cooled by air and by the evaporation of external additional water are not covered by EN 12309. Installatio

37、ns used for heating and/or cooling of industrial processes are not within the scope of EN 12309. All the symbols given in this text should be used regardless of the language used. 1.2 Scope of this Part 5 of EN 12309 This part of EN 12309 specifies the requirements for gas-fired sorption appliances

38、for heating and/or cooling with a net heat input not exceeding 70 kW. This part of EN 12309 deals particularly with the requirements relating to the declaration of capacity and energy efficiency performance. 2 Normative references The following documents, in whole or in part, are normatively referen

39、ced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12309-1:2014, Gas-fired sorption appliances for heating and/or cooling wi

40、th a net heat input not exceeding 70 kW Part 1: Terms and definitions BS EN 12309-5:2014EN 12309-5:2014 (E) 6 prEN 12309-2:20131Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW Part 2: Safety EN 12309-3:2014, Gas-fired sorption appliances for heating

41、 and/or cooling with a net heat input not exceeding 70 kW Part 3: Test conditions EN 12309-4:2014, Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW Part 4: Test methods EN 12309-6:2014, Gas-fired sorption appliances for heating and/or cooling with a

42、net heat input not exceeding 70 kW Part 6: Calculation of seasonal performances EN 12309-7:2014, Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW Part 7: Specific provisions for hybrid appliances 3 Terms and definitions For the purposes of this docum

43、ent, the terms and definitions given in EN 12309-1:2014 apply. When GUE (Gas Utilization Efficiency) or SPER (Seasonal Primary Energy Ratio) values are stated according to Clause 4 (Requirements) and to Clause 5 (Marking and instructions), these values need to be expressed in percentage terms. 4 Req

44、uirements 4.1 Cooling capacity rating and energy performance 4.1.1 Primary functions The rated cooling capacity corresponding to Standard Rating conditions given in EN 12309-3:2014, Table 3, together with the gas utilization efficiency under the same conditions shall be specified in the instructions

45、 of the appliance. When measured under the appropriate test conditions given in EN 12309-3:2014, and in accordance with the methods of test described in EN 12309-4:2014, it shall be verified that the rated cooling capacity and the gas utilization efficiency are not less than those stated in the inst

46、ructions. If the rated cooling capacities or gas utilization efficiency corresponding to application rating conditions given in EN 12309-3:2014, Table 3 are specified in the instructions of the appliance, these shall also be verified. When measured under the appropriate test conditions given in EN 1

47、2309-3:2014, and in accordance with the methods of test described in EN 12309-4:2014, it shall be verified that the corresponding rated cooling capacity and, if applicable, the gas utilization efficiency are not less than those stated in the instructions. If a rated cooling capacity or gas utilizati

48、on efficiency for the primary function which relates to conditions other than those given in EN 12309-3:2014 is specified in the instructions of the appliance, the claim(s) shall be verified under the conditions specified in the instructions of the appliance. 4.1.2 Secondary functions If a rated hea

49、ting capacity is specified in the instructions of the appliance, the corresponding gas utilization efficiency and the conditions (water temperature and flow rate) under which the claims are made shall also be stated. It shall be verified under these conditions and under EN 12309-4:2014 appropriate test procedure that these claims are not less than those stated in the instructions. If the secondary function is heat recovery, the rated heat recovery capacity specified shall correspond to the appropriate test conditions given in EN 12