EN 12050-1-2015 en Wastewater lifting plants for buildings and sites - Part 1 Lifting plants for wastewater containing faecal matter《建筑物和施工场地废水提升装置 第1部分 含粪便废水提升装置》.pdf

《EN 12050-1-2015 en Wastewater lifting plants for buildings and sites - Part 1 Lifting plants for wastewater containing faecal matter《建筑物和施工场地废水提升装置 第1部分 含粪便废水提升装置》.pdf》由会员分享，可在线阅读，更多相关《EN 12050-1-2015 en Wastewater lifting plants for buildings and sites - Part 1 Lifting plants for wastewater containing faecal matter《建筑物和施工场地废水提升装置 第1部分 含粪便废水提升装置》.pdf（44页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 12050-1:2015Wastewater lifting plants forbuildings and sitesPart 1: Lifting plants for wastewatercontaining faecal matterBS EN 12050-1:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 12050-1:2015. It supersedes BS EN 12050-1:2

2、001 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee B/505, Wastewater engineering.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provision

3、s of a contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 79314 1 ICS 13.060.30; 91.140.80 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was

4、 published under the authority of the Standards Policy and Strategy Committee on 31 March 2015.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12050-1 March 2015 ICS 91.140.80 Supersedes EN 12050-1:2001English Version Was

5、tewater lifting plants for buildings and sites - Part 1: Lifting plants for wastewater containing faecal matter Stations de relevage deffluents pour les btiments et terrains - Partie 1 : Stations de relevage pour effluents contenant des matires fcales Abwasserhebeanlagen fr die Gebude- und Grundstck

6、sentwsserung - Teil 1: Fkalienhebeanlagen This European Standard was approved by CEN on 17 January 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration

7、. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by t

8、ranslation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Fi

9、nland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZA

10、TION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12050-1:2015 EBS EN 12050-1:2015EN 12050-1:201

11、5 (E) 2 Contents Page Foreword 4 1 Scope 5 2 Normative references 5 3 Terms, definitions, symbols and abbreviations .6 3.1 Terms and definitions .6 3.2 Symbols and abbreviations 7 3.2.1 Symbols 7 3.2.2 Abbreviations .7 4 Materials and product characteristics .7 4.1 Materials .7 4.2 Collection tank .

12、7 4.2.1 Mechanical resistance .7 4.2.2 Watertightness .8 4.2.3 Odourtightness 8 4.2.4 Protection against explosion 8 4.3 Lifting effectiveness 8 4.3.1 General 8 4.3.2 Pipe connections .8 4.3.3 Minimum dimensions of ventilating pipe system .8 4.3.4 Minimum flow rate .9 4.3.5 Minimum free ball passage

13、 of the lifting plant .9 4.3.6 Minimum size of discharge connections for non-macerating faecal lifting plants .9 4.3.7 Minimum size of discharge pipe system for macerating faecal lifting plants 10 4.3.8 Useful volume . 10 4.4 Control equipment 10 4.5 Electrical equipment . 10 4.6 Fixing devices . 10

14、 4.7 Reaction to fire 10 4.7.1 General . 10 4.7.2 Plants classified as Class A1 without the need for testing 10 4.7.3 Plants classified according to test results . 11 4.8 Noise level . 11 4.9 Durability . 11 4.9.1 General . 11 4.9.2 Durability of watertightness and odourtightness 12 4.9.3 Durability

15、 of lifting effectiveness 12 4.9.4 Durability of mechanical resistance . 12 4.10 Dangerous substances 12 4.11 Need for a stand-by pumping device (Twin lifting plant) 12 5 Testing . 13 5.1 Preparation 13 5.1.1 General . 13 5.1.2 Testing for hydraulic performance . 13 5.2 Tightness testing 13 5.2.1 Wa

16、ter pressure test 13 5.2.2 Odourtightness . 13 5.2.3 Discharge pipe connection 13 5.2.4 Hot water test 13 5.3 Lifting effectiveness . 14 BS EN 12050-1:2015EN 12050-1:2015 (E) 3 5.3.1 Test arrangement 14 5.3.2 Test procedure . 14 5.3.3 Macerating faecal lifting plants 15 6 Assessment and verification

17、 of constancy of performance - AVCP 15 6.1 General . 15 6.2 Type testing . 15 6.2.1 General . 15 6.2.2 Test samples, testing and compliance criteria 16 6.2.3 Test reports 17 6.2.4 Shared other party results 17 6.2.5 Cascading determination of the product type results . 18 6.3 Factory production cont

18、rol (FPC) 19 6.3.1 General . 19 6.3.2 Requirements . 19 6.3.3 Product specific requirements . 23 6.3.4 Initial inspection of factory and of FPC only for products covered by AVCP system 1 23 6.3.5 Continuous surveillance of FPC only for products covered by AVCP system 1 . 24 6.3.6 Procedure for modif

19、ications. 24 6.3.7 One-off products, pre-production products (e.g. prototypes) and products produced in very low quantity . 24 7 Marking, labelling and packaging 25 7.1 Manufacturers declaration . 25 7.2 Marking . 25 8 Manufacturers instructions for installation, operation and maintenance 25 Annex A

20、 (informative) Recommended materials . 26 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation 27 ZA.1 Scope and relevant characteristics . 27 ZA.2 Procedure for AVCP of lifting plants for wastewater containing faecal matter 29

21、 ZA.2.1 System(s) of AVCP 29 ZA.2.2 Declaration of performance (DoP) . 32 ZA.2.2.1 General 32 ZA.2.2.2 Content 32 ZA.2.2.3 Example of DoP 33 ZA.3 CE marking and labelling 36 Bibliography 39 BS EN 12050-1:2015EN 12050-1:2015 (E) 4 Foreword This document (EN 12050-1:2015) has been prepared by Technica

22、l Committee CEN/TC 165 “Wastewater engineering”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2015 and conflicting national standards shall be

23、 withdrawn at the latest by December 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12050-1:2001. T

24、his document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of the Regulation (EU) No. 305/2011. For relationship with EU Regulation, see informative Annex ZA, which is an integral part of this do

25、cument. The series of standards EN 12050 “Wastewater lifting plants for buildings and sites” consists of the following parts: Part 1: Lifting plants for wastewater containing faecal matter; Part 2: Lifting plants for faecal-free wastewater; Part 3: Lifting plants for limited applications; Part 4: No

26、n-return valves for faecal-free wastewater and wastewater containing faecal matter. The main changes with respect to the previous edition are listed below: a) reaction to fire added; b) hot water test added; c) Clause 6 updated in accordance with “Implementation of the Construction Products Regulati

27、on (CPR) in harmonized standards”; d) Annex ZA updated in accordance with “Implementation of the Construction Products Regulation (CPR) in harmonized standards” (adoption of the Regulation EU No. 305/2011); e) editorially revised. According to the CEN-CENELEC Internal Regulations, the national stand

28、ards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Lu

29、xembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 12050-1:2015EN 12050-1:2015 (E) 5 1 Scope This European Standard applies to lifting plants for wastewater containing faecal matter (referred to as “fa

30、ecal lifting plants” in this standard) for drainage of locations below flood level in buildings and sites to prevent any backflow of wastewater into the building. These lifting plants may be prefabricated or delivered as prefabricated kits and assembled on site. This standard specifies general requi

31、rements, basic construction and testing principles, together with information on materials and assessment and verification of constancy of performance. Construction and testing requirements for non-return valves used in wastewater lifting plants are given in EN 12050-4. This European Standard does n

32、ot apply for pumping installations for drain and sewer systems outside buildings for pumping of municipal wastewater according to EN 752:2008, Annex F. NOTE Lifting plants for wastewater containing faecal matter can also be used for wastewater that does not contain faecal matter and for surface wate

33、r. This European Standard applies also to lifting plants for wastewater containing faecal matter which are not prefabricated but composed of individual components purchased from different suppliers and put together on site. 2 Normative references The following documents, in whole or in part, are nor

34、matively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 124, Gully tops and manhole tops for vehicular and pedest

35、rian areas Design requirements, type testing, marking, quality control EN 12056-1:2000, Gravity drainage systems inside buildings Part 1: General and performance requirements EN 12056-4:2000, Gravity drainage systems inside buildings Part 4: Wastewater lifting plants - Layout and calculation EN 1256

36、6-1:2000/A1:2003, Small wastewater treatment systems for up to 50 PT Part 1: Prefabricated septic tanks EN 12566-4:2007, Small wastewater treatment systems for up to 50 PT Part 4: Septic tanks assembled in situ from prefabricated kits EN 13463-1, Non-electrical equipment for use in potentially explo

37、sive atmospheres Part 1: Basic method and requirements EN 13501-1, Fire classification of construction products and building elements Part 1: Classification using data from reaction to fire tests EN 13823, Reaction to fire tests for building products Building products excluding floorings exposed to

38、the thermal attack by a single burning item EN 13598-1, Plastics piping systems for non-pressure underground drainage and sewerage Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 1: Specifications for ancillary fittings including shallow inspection chambers

39、EN 60079-0, Explosive atmosphere Part 0: Equipment General requirements (IEC 60079-0) BS EN 12050-1:2015EN 12050-1:2015 (E) 6 EN 60529, Degrees of protection provided by enclosures (IP Code) (IEC 60529) EN ISO 9906:2012, Rotodynamic pumps Hydraulic performance acceptance tests Grades 1, 2 and 3 (ISO

40、 9906:2012) EN ISO 20361, Liquid pumps and pump units Noise test code Grades 2 and 3 of accuracy (ISO 20361) 3 Terms, definitions, symbols and abbreviations 3.1 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1.1 domestic wastewater water which i

41、s contaminated by use and normally discharged from WC, showers, baths, bidets, wash basins, sinks and floor gullies SOURCE: EN 12056-1:2000, 3.1.2 3.1.2 faecal lifting plant device for the collection and automatic lifting of wastewater, which may or may not contain faecal matter, to a height above f

42、lood level Note 1 to entry: A non-return valve according to EN 120504 is a component of the plant. 3.1.3 collection tank for wastewater containing faecal matter unpressurized part of a faecal lifting plant in which the incoming wastewater is stored prior to lifting 3.1.4 site area in the proximity o

43、f the building outside buildings Note 1 to entry: For further explanation see EN 120561:2002, Figure 1. 3.1.5 useful volume volume in the collection tank between switch-on level and switch-off level 3.1.6 flood level maximum level to which wastewater can rise within a drainage system SOURCE: EN 1205

44、6-1:2000, 3.1.7 3.1.7 pumping device for wastewater containing faecal matter component of a faecal lifting plant which pumps the wastewater out of the collection tank to a height above flood level 3.1.8 maximum pump operating pressure maximum hydrostatic pressure that the pumping device is capable t

45、o create BS EN 12050-1:2015EN 12050-1:2015 (E) 7 3.1.9 ball passage passage where a ball with a defined diameter can pass through without deformation 3.1.10 warning device device which gives a signal if a malfunction occurs 3.2 Symbols and abbreviations 3.2.1 Symbols dipipe internal diameter, in mm

46、Q flow rate, in l/s H discharge head, in m v flow velocity, in m/s 3.2.2 Abbreviations AVCP assessment and verification of constancy of performance DN nominal diameter CWT classified without testing CWFT classified without further testing SBI single burn item DoP declaration of performance FPC facto

47、ry production control 4 Materials and product characteristics 4.1 Materials Materials used shall be adequate to meet the demands of installation and operation. Materials shall comply with the requirements of this standard and shall not release dangerous substances (see 4.10). Examples of suitable ma

48、terials for the construction of wastewater lifting plants are given in Annex A (informative). For collection tanks only corrosion resistant materials or materials with a corrosion resistant protective coating shall be used. 4.2 Collection tank 4.2.1 Mechanical resistance The structural stability of

49、collection tanks shall be shown to be adequate for the place of installation. When tested according to 5.2.1 the tank shall be tight and shall not show any deformation influencing subsequent function of the lifting plant. Where loads on the tank may be expected the load bearing capacity of the collection tank shall be shown to be adequate for the place of installation and the crushing resistance or maximum load deformation (as applicable) shall be tested and declared in accordance with appropriate standards, e.g. EN 13598-