EN 1089-3-2011 en Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 3 Colour coding《便携式煤气罐 煤气罐识别(LPG除外) 第3部分 颜色编码》.pdf

《EN 1089-3-2011 en Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 3 Colour coding《便携式煤气罐 煤气罐识别(LPG除外) 第3部分 颜色编码》.pdf》由会员分享，可在线阅读，更多相关《EN 1089-3-2011 en Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 3 Colour coding《便携式煤气罐 煤气罐识别(LPG除外) 第3部分 颜色编码》.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 1089-3:2011Transportable gas cylinders Gas cylinder identification(excluding LPG)Part 3: Colour codingBS EN 1089-3:2011 BRITISH STANDARDNational forewordThis British Standa

2、rd is the UK implementation of EN 1089-3:2011. Itsupersedes BS EN 1089-3:2004 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee PVE/3/7, Gas containers - Gas cylinder (receptacle)operations.A list of organizations represented on this committee can beobtai

3、ned on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2011ISBN 978 0 580 68705 1ICS 01.070; 23.020.30Compliance with a British Standard cannot confer immunity fromlegal obligations

4、.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 August 2011.Amendments issued since publicationDate Text affectedBS EN 1089-3:2011EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1089-3 July 2011 ICS 01.070; 23.020.30 Supersedes EN 108

5、9-3:2004English Version Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 3: Colour coding Bouteilles gaz transportables - Identification de la bouteille gaz (GPL exclu) - Partie 3: Code couleur Ortsbewegliche Gasflaschen - Gasflaschen-Kennzeichnung (ausgenommen Flssig

6、gas (LPG) - Teil 3: FarbcodierungThis European Standard was approved by CEN on 4 May 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date l

7、ists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation und

8、er the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,

9、 Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NO

10、RMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1089-3:2011: EBS EN 1089-3:2011EN 1089-3:2011 (E) 2 Contents Page Foreword 3Introduction .41 Scope 52 Normative referen

11、ces 53 Terms and definitions .54 Symbols and abbreviations 65 Principle 66 Colour coding system .66.1 General 66.2 Shoulder .66.2.1 General 66.2.2 Gas properties 66.2.3 Specific single gases 76.2.4 Mixtures of inert gases 86.2.5 Oxygen mixtures and air for medical use and breathing application 86.2.

12、6 Specific medical gas mixtures .86.3 Body 87 Implementation 8Annex A (normative) Colour references .9Annex B (informative) Colour location . 10Annex C (normative) Letter “ N “ 12Annex D (informative) Guidance for the selection of shoulder colours . 13D.1 General . 13D.2 Typical examples 13Bibliogra

13、phy . 15BS EN 1089-3:2011EN 1089-3:2011 (E) 3 Foreword This document (EN 1089-3:2011) has been prepared by Technical Committee CEN/TC 23 “Transportable gas cylinders”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publicat

14、ion of an identical text or by endorsement, at the latest by January 2012, and conflicting national standards shall be withdrawn at the latest by January 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC sha

15、ll not be held responsible for identifying any or all such patent rights. This document supersedes EN 1089-3:2004. This document has been technically revised by the following: a) the white colouration of gas cylinder body dedicated for medical use; b) the new specific colour dedicated to nitric oxid

16、e/ nitrogen for medical use; c) the introduction of definitions (gas for medical use, breathing gas, industrial gas); d) the application of bright green colouration for inert gas mixtures N2or He with O2less than 20 % (exception for the two specific colours); e) the restriction of configuration of t

17、wo colours on shoulder as quadrants to air (medical use or for breathing use); f) a guidance for the selection of shoulder with typical examples of assignment of colour. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, a

18、nd supports essential requirements of EU Directive(s). According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finl

19、and, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 1089-3:2011EN 1089-3:2011 (E) 4 Introduction The labelling of gas cylinde

20、rs as required by the RID/ADR- Regulations is the primary method of indicating dangers of cylinder contents. However, colour coding is used to identify the contents of gas cylinders from a distance, e.g. in case of a fire. It is recognized that other systems are in use and may be used in conjunction

21、 with the requirements of this European Standard. This European standard, along with EN ISO 13769, EN ISO 21007-1 and EN ISO 21007-2 belongs to a series of European Standards specifying gas cylinder identification requirements. NOTE Labelling and marking of gas cylinders is subject to provisions of

22、RID/ADR which take precedence over marking clauses in this standard. BS EN 1089-3:2011EN 1089-3:2011 (E) 5 1 Scope This European Standard specifies a colour coding system for the secondary method of identification of the contents of gas cylinders for industrial gases, breathing gas application and g

23、ases for medical use with particular reference to the properties of the gas or gas mixture. This European Standard does not apply to cylinders containing liquefied petroleum gas (LPG), to refrigerant gases, to portable fire extinguishers or stationary cylinder extinguishing. Bundle colour coding is

24、not addressed by this or other standards. NOTE LPG includes substances carried under the UN number 1965 “Hydrocarbon gas mixture, liquefied, N.O.S.“ 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the editio

25、n cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN ISO 10156, Gases and gas mixtures Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets (ISO 10156:2010) ISO 5145, Cylinder valve

26、outlets for gases and gas mixtures Selection and dimensioning ISO 10298, Determination of toxicity of a gas or gas mixture ISO 13338, Determination of tissue corrosiveness of a gas or gas mixture European pharmacopoeia, monograph 1684 3 Terms and definitions For the purposes of this document, the fo

27、llowing terms and definitions apply. 3.1 gas for medical use any gas or mixture of gases intended to be administered to patients for therapeutic, diagnostic or prophylactic purposes, with or without pharmacological action, or to be used for surgical tools, and it covers both medicinal and medical ga

28、ses (see ISO 5145) 3.2 inert gas non-toxic, non-corrosive, non-flammable and non-oxidizing gas or gas mixture 3.3 synthetic air for medical use to refer to pharmacopoeia, monograph 1684, and for other use mixtures containing 20 % to 23,5 % oxygen in nitrogen to be considered 3.4 industrial gas gas o

29、r gas mixtures not covered by 3.1 and not used for breathing gas use 3.5 breathing gas gas filled in cylinders for breathing and diving application, excluding gas for medical use BS EN 1089-3:2011EN 1089-3:2011 (E) 6 3.6 body cylindrical part of a gas cylinder 4 Symbols and abbreviations For the pur

30、poses of this document, the following symbols apply. 4.1 N.O.S. not otherwise specified 5 Principle Colour coding is used to give information about the contents of gas cylinders from a distance e.g. in case of emergency and to distinguish between cylinders used for industrial and medical uses. For a

31、ll applications, hazard/identification colours shall be applied to cylinder shoulders. For gases for medical use, the body of the cylinder shall also be colour coded (see 6.3). For applications other than medical, the cylinder body may be coloured. The use of a colour for the cylinder body that allo

32、ws misinterpretation of the hazard of the gas is not allowed. Colours used shall be in accordance with RAL register 840HR given in Annex A or equivalent. 6 Colour coding system 6.1 General The following colour coding requirements are applicable to the shoulder and the body of the cylinder. 6.2 Shoul

33、der 6.2.1 General Gas cylinders are assigned colours using three methods. Colours are chosen based on the properties of the contents in accordance with the hazard of the gas filled in the cylinder (6.2.2). Some specific gases and gas mixtures are assigned colours relevant to that gas or gas mixture

34、as noted in 6.2.3 and 6.2.6. Instead of the hazard colour, other colour(s) may be assigned based on the components of a gas mixture (6.2.3 or 6.2.4 or 6.2.5). Annex D gives guidance for the selection of shoulder colours. 6.2.2 Gas properties 6.2.2.1 Unless specifically identified in 6.2.3, 6.2.4, 6.

35、2.5 or 6.2.6, all gases and gas mixtures shall be identified by a colour coding indicating the properties of the contents in accordance with the colour of the danger labels as specified in RID/ADR. When two colours are applied to the cylinder shoulder, they should be in one of the formats (bands or

36、quadrants) identified in Annex B. BS EN 1089-3:2011EN 1089-3:2011 (E) 7 The property shall be classified in a descending order of hazard as follows: 6.2.2.2 For gases with a single danger: a) toxic and/or corrosive (in accordance with ISO 10298 and ISO 13338) yellow; b) flammable (in accordance with

37、 EN ISO 10156) red; c) oxidizing (in accordance with EN ISO 10156) light blue; d) inert1) bright green. The colour BRIGHT GREEN shall not be used for air for medical use or breathing application (see 6.2.5). 6.2.2.3 For gases with more than one danger: When a gas or mixture has two hazard properties

38、, then the cylinder shoulder shall be coloured in accordance with the primary hazard. The colour of the secondary hazard (flammable or oxidizing) may also be applied to the cylinder shoulder: a) toxic (and/or corrosive) and flammable yellow plus red; b) toxic (and/or corrosive) and oxidizing yellow

39、plus light blue. 6.2.3 Specific single gases 6.2.3.1 The following gases shall be identified by specific colours rather than the colour system defined in 6.2.2. a) Flammable gases: Acetylene Maroon. b) Oxidizing gases: Oxygen White; Nitrous oxide Blue. 6.2.3.2 Inert gases for medical application sha

40、ll be further differentiated by use of the following colours: a) Argon Dark green; b) Nitrogen Black; c) Carbon dioxide Grey; d) Helium Brown. Specific colours of single gases described above are identical to ISO 32. These colours may also be used for applications other than medical instead of the b

41、right green colour (inert) as indicated in 6.2.2. 1) in accordance with 3.2 BS EN 1089-3:2011EN 1089-3:2011 (E) 8 NOTE Inert gases for medical use are also differentiated from industrial use by the colouration of the gas cylinder body, white for medical use (see 6.3). 6.2.4 Mixtures of inert gases I

42、nstead of the hazard colour as indicated in 6.2.2, combinations of colours (maximum two, see Annex D) of the specific component gases listed in 6.2.3.2 may be used to identify the cylinder contents. 6.2.5 Oxygen mixtures and air for medical use and breathing application For medical use, the followin

43、g gas mixtures containing at least 20 % oxygen shall be identified using the colour of the components listed in 6.2.3. These colours may also be used for breathing applications other than medical. a) Air or synthetic air white plus black; b) Oxygen/helium white plus brown; c) Oxygen/carbon dioxide w

44、hite plus grey; d) Oxygen/nitrous oxide white plus blue. If the gas mixture contains more than one other gas than oxygen, then 6.2.2 shall be applied. All the above gas mixtures containing less than 20 % oxygen shall be coloured bright green. NOTE A deviation from this requirement is possible for sp

45、ecific mixture use for deep diving, e.g. helium with minor percentage of oxygen. These colours shall neither be used for industrial gas mixtures containing these components, nor also for breathing gases with less than 20 % oxygen which are life threatening to breathe. 6.2.6 Specific medical gas mixt

46、ures In case of medical gas mixture for inhalation containing less 1 000 ppm(V/V) of NO (nitric oxide) in nitrogen a specific colour on the shoulder, Turkish blue, shall be used. 6.3 Body All cylinders for gas for medical use shall be coloured white along the body of the cylinder. White colouration

47、of the body shall not be used for any other applications. 7 Implementation Cylinders colour coded in accordance with this European Standard shall have the letter “N” marked twice on the shoulder of the cylinder except if there is no risk of mis-interpretation. When “N” is used, these markings shall

48、be positioned diametrically opposed and displayed in a colour distinct from the colours of the cylinder shoulder. The size and shape of “N” shall be as indicated in Annex C. BS EN 1089-3:2011EN 1089-3:2011 (E) 9 Annex A (normative) Colour references Table A.1 Colours Colour RAL numberaRAL designatio

49、nYellow 1018 Zinc yellowRed 3000 Flame red Light blue 5012 Light blue Bright green 6018 Yellow green Maroon 3009 Oxide redWhite 9010 Pure whiteBlue 5010 Gentian blueDark green 6001 Emerald green Black 9005 Jet blackGrey 7037 Dusty greyBrown 8008 Olive brownTurkish blue 5018 Turkish blue a The colours specified are in accordance with the register RAL 840 HR, RAL German Institute for Quality Assurance and Certification, Siegburger Strasse 39, D-53757 Sankt Augustin, Germany www.ral.de BS E