EN 1015-7-1998 en Methods of Test for Mortar for Masonry - Part 7 Determination of Air Content of Fresh Mortar《圬工用灰浆试验方法 第7部分 新鲜灰浆空气含量的测定》.pdf

《EN 1015-7-1998 en Methods of Test for Mortar for Masonry - Part 7 Determination of Air Content of Fresh Mortar《圬工用灰浆试验方法 第7部分 新鲜灰浆空气含量的测定》.pdf》由会员分享，可在线阅读，更多相关《EN 1015-7-1998 en Methods of Test for Mortar for Masonry - Part 7 Determination of Air Content of Fresh Mortar《圬工用灰浆试验方法 第7部分 新鲜灰浆空气含量的测定》.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、 STD.BS1 BS EN LOL5-7-ENGL 1999 Lb24bb 0743b52 532 BRITISH STANDARD Methods of test for mortar for masonry - Part 7: Determination of air content of fresh mortar The European Standard EN 10157 1998 has the status of a British Standard ICs 91.100.10 BS EN 1015-71999 NO COPYING WITHOUT BSI PERMISSION

2、EXCEPT AS PERMITTED BY COPYRIGHT LAW BS EN 1015-7:1999 direction of the Sector AmdNo. Cinnmiee for Buiiding and Civil nigineering, was published under the authority of the Standards Commiaee and comes into effect on 15 February 1999 Q BSI 02-1999 National foreword Dak Text affected This Brish Standa

3、rd is the English language version of EN 101571998. It is included in a package of standards declared by CENm 125 that will parhly supemede BS 4551-1, Mews of testing mmtars, screeds and p! - present to the responsible European committee any enquiries on the - monitor related intedonai and European

4、developments and promulgate inteqm$ation, or proposals for change, and keep the UK interests informed; them in the IK A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European

5、 publicaiions referred to in this document may be found in the BSI Standards Catalogue under the section entitled “Internationai Stanards Correspondence Index“, or by using the “Find“ faciiity of the BSI Standards Electronic Catalogue. A British standard does not purport to include all the necessary

6、 provisions of a contract Users of British Standards are responsible for their comt application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to

7、5 and a back cover. ISBN O 680 30749 2 EUROPEAN mmm Nom EUROPENNE EUROP- NORM EN 1015-7 October 1998 ICs 91.100.10 Descriptors: air content, pressure method, alcohol methd English version Methods of test for mortar for masomy - Part 7: Delmnhation of air content of fresh mortar Mhodes dessai des mor

8、tiem pour maqonnerie - Partie 7 Dtermination de la teneur en air du mortier his hml prufverfahren nIr MM fur Mauerwerk- Teil 7 Ikstimmung des Luftgehalts von This European Standard was approved by CEN on 4 September 1998. CEN members are bound to comply with the CENKENELEC Intenial Regulations which

9、 stipulate the conditions for giving this European Standard the status of a national standaxd without any alteraon. Upto-date lists and bibhographid references conceniing such national standarch may be obtained on application to the Central Secretariat or to any CEN member. This European Standard ex

10、ists in three officiai versions (English, Rench, Gem). A version in any other language made by translation under the responsibility of a CEN member into its own ianguage and noified to the Central Secretariat has the same status as the officiai versions. CEN members are the national standards bodies

11、 of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. European Committee for Standardization Comitk Europen de Normalisation Europisches Komitee fr Normung Ce

12、ntral Secretariat: rue de Stassart 36, B-1060 Brussels O 1998 CEN AU rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 101571998 E Page 2 EN 1015-7:1998 Foreword This European standard has been prepared by Technical Committee CENRC 125, Maso

13、q, the Secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identicai text or by endorsement, at the latest by April 1998, and conflicting nationa3 standards shall be withdrawn at the latest by September 2000. This

14、European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free hade Association and includes the performance requirements referred to in the Eurocode for masonry structures. According to the CENKENELEC Internai Regulations, the national standards or

15、ganizations of the foilowing countries are bound to implement this European Standad Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, I-, Luxembourg, Netherianch, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Contents Foreword 1 Sco

16、pe 2 Nonnative references 3 principle 4 Symbols 5 Apparatus 6 Sampling, preparation and storage of test samples 7 Method A - Pressure method 8 Metho B - Alcohol method 9 Testreport Annex A (nonnative) Calibration of the test WP- page 2 3 3 3 3 3 5 O BSI 02-1999 STD-BSI BS EN LOL5-7-ENGL 1777 m Lb24b

17、bS 074365b LB8 m 1 Scope This European Standard species two methods for determining the air content of fresh mortars including those containing mineral binders and both dense and lightweight aggregates. Method A “The pressure method“ and Method B “The alcohol method“. For air content less than 20 %,

18、 method A is applicable. For air content of 20 % or more, method B is applicable. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publicati

19、ons are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. prEN 9981, Speci

20、fkation for mortar for masonry - Part 1: Iiknwy an plastering mortar wih inorganic binding agents. prEN 9982, Specification for mdar for masonry - Part 2: Masonry mortar. EN 1015-2, Methods of test for mortar for masonry - Part 2: Bulk sampling of mortars and prepamtion of test mortars. prEN 10153,

21、Methods of test for mortar for masonry - Part 3: Determination of conslst-wce of fresh mortar ym table). 3 Principle A volume of mortar is placed into a specified measuring vessel. Water is introduced on top of the mortar surface, and by means of applied initial volume of mortar (mi); final volume o

22、f mortar plus alcohol (mi). 5 Apparatus 6.1 Apparatus for Method A - Pressure method 6.1.1 Sample container and cow assemblg comprising a metal bowl (sample container) with a capacity of approximately 1 litre, fitted with a metal cover assembly to whch is attached a sealed air chamber (pressure cham

23、ber). A pressure gauge for measurement of the applied air pressure (see Figure Al) is connected to it. Page 3 EN 1015-71998 6.1.2 Tamper, consisting of a rigid, non-absorptive rod of circular crosssection, approximately 40 mm in diameter and approximately 200 mm long. The tamping face is flat and at

24、 right angles to the length of the tamper. The mass of the tamper is 0,250 kg f 0,015 kg. 6.1.3 Trowel. 6.1.4 P NOTE This is the sample taken from the bulk supply that is to be used for all of the tests in EN 1015. c) the method used for taking the buk test sample (if known) and the name of the orga

25、nization that took it; d) the type, origin and desigmtion of the mortar by reference to the relevant Part of prEN 998; e) the date and time of testing; f) preparation (mixjng, casting) and storage (curing) conditions; g) the date and time of preparing test samples for test (i.e. date and time of any

26、 mixing, casting, moulding, or demoulding procedure, if appropde); h) the flow value of the test mortar determined in accordance with prEN 10153; i) age of mortar when tested; j) test method used (Method A - Pressure method or Method B - Alcohol method); k) test dts (individual values and mean value

27、 of air content); 1) remarks, if any This information is contained in the certificate of sampling (see EN 10152). O BSI 02-1999 STD.BSI BS EN LOL5-7-ENGL 1777 lb24bb7 0743b58 T50 Page 5 EN 1015-E1998 Key: 3 Valve B 6 Pressure gauge 9 Clamping device Annex A (normative) Calibration of the pressure te

28、st apparatus A calibration curve sha be established between air contents of O % and 25 % in increments of 5 96 Each value shall be calculated from the mean value of three measurements according to the following procedure. Fll the sample container with boiled water, at 20 “C f 2 OC. Fix the extension

29、 tube to the corresponding valve A (see Fgure Al). Fit the cover and close the air Valve between the air chamber and the sample container. Fill the chamber with water through valve A, keeping Valve B open, until ali air is expelled. Then close valves A and B. Connect the calibrating vessel to valve

30、k Pump air into the air chamber until the pressure reaches an initial prescribed level. Then open the air valve to force just a sufficient quantity of water to expel from the sample container and ii the caibration vessel fuil or to predetermined lines marked on the vessel (10 ml water corresponds to

31、 1 96 air content), using valve A to control the flow. 1 Extension tubing for calibration checks 2 Valve A 4 pump 5 Main air valve 7 Air bleeder valve 8 Airchamber 10 Metal bowl Close valve A and remove the calibration vessel. Release the air from the apparatus through valve B and then open valve A

32、to drain the extension tube back into the sample container. At this point of the procedure the sample container contains a volume of air corresponding to the predetermined volume of water in the calibration vessel. Pump air into the air chamber until the pressure reaches the initial prescribed level

33、. Close vaives A and B and then open the valve between the air chamber and the sample container. When equilibrium is reached the reading on the pressure gauge should correspond to the percentage of air determined to be in the sample container. if two or more determinations show the same variation fr

34、om the correct air content, as determined by the volume of water in the calibration vessel, reset the dial hand to the correct air content and repeat the test until the gauge re- corresponds to the dibraiion air content within 0,l Oh O BSI 02-1999 BS EN 1015-7: 1999 BSI 389 Chiswick High Road London

35、 w4 4AL STD.BSI BS EN 1OL5-7-ENGL 1999 D lb24bb9 0743b57 977 = BSI - British Standards Institution BSI is the independent national body responsible for preparing British standards. It presents the K view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revi

36、sions British Standards are updated by amendment or revision. Users of British Standards should make sm that they possess the latest amendments or editions. It is the constant aim of BSI to improve the qua.ty of our products and services. We would be grateful if anyone finding an inaccuracy or ambig

37、uity while using this British Standard would inform the Secretary of the technical committee responsible, the identily of which can be found on the inside front cover. Tek 0181 996 9OOO. Fax 0181 996 7400. BSI offers members an individuai upating service called PLUS which ensures that subscriben aut

38、omatially receive the latest editions of standards. Buying standards Orders for all BSI, internationai and foreign standards publications should be addressed to Customer Services. “el 0181 996 7000. Fax: 0181 996 7001. In response to orders for intemaiional standards, it is BSI policy to supply the

39、BSI implementation of those that have been published as British Standars, unless otherwise requested Information on standards BSI provides a wide range of information on national, European and international standars through its Library and its Technical Help to Exporters Service. Various BSI eleclxo

40、nic information services are also available which give details on all its products and services. Contact the Information Centre. l10181996 7111. Fax 0181 996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of st

41、andards. For details of these and other benefits contact Membership Administrati on. Tel: 0181 996 7002. Fax 0181 996 7001. COPMght Copyright subsists in aN BSI publications. BSI also holds the copyright, in the UK, of the publications of the intedonal staneon bodies. Except as permitted under the C

42、opyright, Designs and Patents Act 1988 no exbract may be reproduced, stored in a retried system or lmnsmitted in any form or by any means - electronic, photocopying, recording or otherwise - without prior written permission km BSI. This does not preclude the free use, in the com of implementing the

43、standard, of necessary detaiis such as symbols, and size, type or grade designaons. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained If mon is granted, the terms may include royalty payments or a licensing agreement. Details and avice can be obtained from the Copyright Manager. Tel: 0181 996 7070.