EN 1015-4-1998 en Methods of Test for Mortar for Masonry - Part 4 Determination of Consistence of Fresh Mortar (by Plunger Penetration)《圬工用灰浆试验方法 第4部分 新鲜灰浆浓度的测定(倾倒渗透法)》.pdf

《EN 1015-4-1998 en Methods of Test for Mortar for Masonry - Part 4 Determination of Consistence of Fresh Mortar (by Plunger Penetration)《圬工用灰浆试验方法 第4部分 新鲜灰浆浓度的测定(倾倒渗透法)》.pdf》由会员分享，可在线阅读，更多相关《EN 1015-4-1998 en Methods of Test for Mortar for Masonry - Part 4 Determination of Consistence of Fresh Mortar (by Plunger Penetration)《圬工用灰浆试验方法 第4部分 新鲜灰浆浓度的测定(倾倒渗透法)》.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD Methods of test for mortar for masonry - Part 4: Determination of consistence of fresh mortar (by plunger penetration) The European Standard EN 101541998 has the status of a British Standard ICs 91.100.10 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BS EN L

2、O1541999 STD.BS1 BS EN LOL5-4-ENGL 1777 = Lb2Libb 0743b37 22b M been prepared under the direction of the Sedor AmdNo. Date Committee for Building and Civil Engineering, was published under the authority of the Standards Committee and comes into effect on 15 February 1999 Q BSI 02-1999 ISBN O 680 307

3、47 6 BS EN 1016-4:1999 Text affected National foreword This British Standard is the English language version of EN 101541998. It is included in a package of standards declared by CENRY: 125 that wi partiauy supemede Bs 4551-1, Methods of testing mortars, screeds and plasters - Part i: Physical testi

4、ng, the corresponding test methods of which, it is intended, wili be withdrawn on 30 September 2000 if a?l the European Standards included in the package are available. The K participation in its preparation was entrusted by Technid Committee M19, Masonry and associated testing, to Subcommittee B/51

5、9/2, Mortar, which has the responsibility to: - aid enquirers to understand the tea - present to the responsible European commim any enquiries on the - monitor related international and European developments and promulgate interpretation, or proposals for change, and keep the TJK interests informed;

6、 them in the K A list of organizations represented on this subcommittee can be obtained on request to its secm. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section ent

7、itled ?Ink b) the piace, date and time of taking the bulk test sampiel); NOTE This is the sample taken from the buik supply that is to be used for aii of the tests in EN 1015. c) the method used for bkhg the buik test sample (if hown) and the name of the organization that took it; d) the type, origi

8、n and designation of the mortar by reference to the relevant part of prEN 998 e) preparation (mixing, casting) and storage (curing) conditions; f) the date and time of preparing test samples for test (i.e. date and time of any mixing, casting, moulding, or demoulding procedure, if appropriate); g) t

9、he date and time of testmg; h) test results (individual measurements and the plunger penetration values in mm for each test sample); i) remarks, if any. This information is contained on the certificate of sampling (see EN 1015-2). O BSI 02-1999 STD-BSI BS EN 1015-4-ENGL 1777 = lb24bb7 0743bV2 b73 W

10、Key: 3 Plastics plunger 6 Guidebush Page 5 EN 101541998 1 Cylindrical vessel 2 Base plate 4 kame 5 Clamp 7 Fixing screw 8 Penetration rod Dimensions in miliimetres Annex A (informative) Bibliography The following informative reference is made in this standard: prEN 10153, Methods of test for mortar

11、for masonry - Part 3: Determinatwn of consistence of fresh mortar y jlbw table). O BSI 02-1999 BS EN 101541999 BSI 389ChiswickHighRoad London w4 4AL BSI - British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standa

12、rds in Europe and at the intedonai level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of ou

13、r products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel 0181 996 9OOO. Fax: 0181 996 7400. BSI off

14、ers members an individual updating service caiied PLUS which ensures that subscribers automaticaiiy receive the latest editions of standards. Buying standards rders for ail BSI, international and foreign standards publications should be addrmed to Customer Services. Tel 0181 996 7000. Fax 0181 996 7

15、001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unies otherwise requested. Information on standards BSI provides a wide range of information on nationai, European and internationai smdar

16、ds through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on ail its products and services. Contact the Information Cenlxe. Tel 0181 996 7111. Fax: 0181 996 7048. Subscribing members of BSI are kept up to dat

17、e with standards developments and receive substantid discounts on the purchase price of standards. For details of these and other benefits contact Membership Administxation. Tel 0181 996 7002. Fax 0181 996 7001. Copyright Copyright subsists in aii ES1 publications. BSI also holds the copyright, in t

18、he UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or lmmmtkd in any form or by any means - electronic, photocopying, recording or otherwise - without

19、 prior written permission hm BSL This does not preclude the -ee use, in the course of implementing the sianciad, of necessary detais such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained if permission is granted, the terms may include royalty payments or a licensing agreement. Detaiis and advice can be obtained from the Copyright Manager. Tel: 0181 996 7070.