ECMA 163-1997 Private Integrated Services Network (PISN) - Specification Functional Model and Information Flows - Name Identification Supplementary Services《专用综合业务网络(PISN) 规范 功能模型和.pdf

《ECMA 163-1997 Private Integrated Services Network (PISN) - Specification Functional Model and Information Flows - Name Identification Supplementary Services《专用综合业务网络(PISN) 规范 功能模型和.pdf》由会员分享，可在线阅读，更多相关《ECMA 163-1997 Private Integrated Services Network (PISN) - Specification Functional Model and Information Flows - Name Identification Supplementary Services《专用综合业务网络(PISN) 规范 功能模型和.pdf（50页珍藏版）》请在麦多课文档分享上搜索。

1、Standard ECMA-1633rd Edition - September 1997Standardizing Information and Communication SystemsPhone: +41 22 849.60.00 - Fax: +41 22 849.60.01 - URL: http:/www.ecma.ch - Internet: helpdeskecma.chPrivate Integrated Services Network(PISN) -Specification, Functional Model andInformation Flows -Name Id

2、entification SupplementaryServices.Standard ECMA-1633rd Edition - September 1997Standardizing Information and Communication SystemsPhone: +41 22 849.60.00 - Fax: +41 22 849.60.01 - URL: http:/www.ecma.ch - Internet: helpdeskecma.chIW Ecma-163.doc 02-09-97 12,09Private Integrated Services Network(PIS

3、N) -Specification, Functional Model andInformation Flows -Name Identification SupplementaryServices(NISD).Brief HistoryThis Standard is one of a series of ECMA Standards defining services and signalling protocols applicable to Private IntegratedServices Networks (PISNs). The series uses ISDN concept

4、s as developed by ITU-T and conforms to the framework ofInternational Standards for Open Systems Interconnection as defined by ISO/IEC. It has been produced under ETSI work itemDE/ECMA-00005.This particular Standard specifies the Calling Name Identification Presentation (CNIP), the Connected Name Id

5、entificationPresentation (CONP) and the Calling/Connected Name Identification Restriction (CNIR) supplementary services.This Standard is based upon the practical experience of ECMA member companies and the results of their active andcontinuous participation in the work of ISO/IEC JTC1, ITU-T, ETSI a

6、nd other international and national standardizationbodies. It represents a pragmatic and widely based consensus.Compared to the 1st and 2nd Editions of Standard ECMA-163 (published by ECMA in March 1992 and December 1993respectively), this 3rd Edition incorporates changes in order to achieve complet

7、e alignment with International StandardISO/IEC 13864:1995(E) published by ISO/IEC in November 1995.Adopted as 3rd Edition of Standard ECMA-163 by the General Assembly in September 1997.- i -Table of contents1 Scope 12 Conformance 13 References (normative) 14 Definitions 24.1 External definitions 24.

8、2 Other definitions 24.2.1 Additional network feature 24.2.2 Application identifier 24.2.3 Busy 34.2.4 Busy party name 34.2.5 Call, basic call 34.2.6 Calling party name 34.2.7 Connected party name 34.2.8 Called party name 34.2.9 Name 34.2.10 Terminal, terminal equipment 35 Acronyms 36 SS-CNIP Stage

9、1 Description 36.1 Description 36.1.1 General Description 36.1.2 Qualifications on Applicability to Telecommunication Services 46.2 Procedures 46.2.1 Provision/Withdrawal 46.2.2 Normal Procedures 46.2.3 Exceptional Procedures 46.3 Interactions with other Supplementary Services and ANFs 46.3.1 Connec

10、ted Name Identification Presentation (CONP) 46.3.2 Calling/Connected Name Identification Restriction (CNIR) 46.3.3 Calling Line Identification Presentation (CLIP) 46.3.4 Connected Line Identification Presentation (COLP) 56.3.5 Calling/Connected Line Identification Restriction (CLIR) 56.3.6 Call Forw

11、arding Unconditional (CFU) 56.3.7 Call Forwarding Busy (CFB) 56.3.8 Call Forwarding No Reply (CFNR) 56.3.9 Call Deflection (CD) 56.3.10 Call Transfer (CT) 56.3.11 Completion of Calls to Busy Subscribers (CCBS) 56.3.12 Completion of Calls on No Reply (CCNR) 5- ii -6.3.13 Path Replacement (ANF-PR) 56.

12、4 Interworking Considerations 56.4.1 Incoming Calls 56.4.2 Outgoing Calls 56.5 Overall SDL 57 SS-CONP Stage 1 Description 77.1 Description 77.1.1 General Description 77.1.2 Qualifications on Applicability to Telecommunication Services 77.2 Procedures 77.2.1 Provision/Withdrawal 77.2.2 Normal Procedu

13、res 77.2.3 Exceptional Procedures 87.3 Interactions with other Supplementary Services and ANFs 87.3.1 Calling Name Identification Presentation (CNIP) 87.3.2 Calling/Connected Name Identification Restriction (CNIR) 87.3.3 Calling Line Identification Presentation (CLIP) 87.3.4 Connected Line Identific

14、ation Presentation (COLP) 87.3.5 Calling/Connected Line Identification Restriction (CLIR) 87.3.6 Call Forwarding Unconditional (CFU) 87.3.7 Call Forwarding Busy (CFB) 87.3.8 Call Forwarding No Reply (CFNR) 87.3.9 Call Deflection (CD) 87.3.10 Call Transfer (CT) 87.3.11 Completion of Calls to Busy Sub

15、scribers (CCBS) 87.3.12 Completion of Calls on No Reply (CCNR) 97.3.13 Path Replacement (PR) 97.4 Interworking Considerations 97.4.1 Outgoing Calls 97.4.2 Incoming Calls 97.5 Overall SDL 98 SS-CNIR Stage 1 Description 118.1 Description 118.1.1 General Description 118.1.2 Qualifications on applicabil

16、ity to Telecommunication Services 118.2 Procedures 118.2.1 Provision/Withdrawal 118.2.2 Normal Procedures 118.2.3 Exceptional Procedures 128.3 Interactions with other Supplementary Services and ANFs 128.3.1 Calling Name Identification Presentation (CNIP) 128.3.2 Connected Name Identification Present

17、ation (CONP) 12- iii -8.3.3 Calling Line Identification Presentation (CLIP) 128.3.4 Connected Line Identification Presentation (COLP) 128.3.5 Calling/Connected Line Identification Restriction (CLIR) 128.3.6 Call Forwarding Unconditional (CFU) 128.3.7 Call Forwarding Busy (CFB) 128.3.8 Call Forwardin

18、g No Reply (CFNR) 128.3.9 Call Deflection (CD) 128.3.10 Call Transfer (CT) 128.3.11 Completion of Calls to Busy Subscribers (CCBS) 128.3.12 Completion of Calls on No Reply (CCNR) 128.3.13 Path Replacement (PR) 128.4 Interworking Considerations 128.4.1 Incoming Calls 128.4.2 Outgoing Calls 138.5 Over

19、all SDL 139 SS-CNIP Stage 2 Description 159.1 Functional Model 159.1.1 Functional Model Description 159.1.2 Description of the Functional Entities 159.1.3 Relationship of the Functional Model to the Basic Call Functional Model 159.2 Information Flows 159.2.1 Definition of Information Flows 159.2.2 R

20、elationship of Information Flows to Basic Call Information Flows 169.2.3 Information Flow Sequences 169.3 The Functional Entity Actions 179.4 Functional Entity Behaviour 179.5 Allocation of Functional Entities to Physical Locations 2010 SS-CONP Stage 2 Description 2110.1 Functional Model 2110.1.1 Fu

21、nctional Model Description 2110.1.2 Description of the Functional Entities 2110.1.3 Relationship of the Functional Model to the Basic Call Functional Model 2110.2 Information Flows 2110.2.1 Definition of Information Flows 2110.2.2 Relationship of Information Flows to Basic Call Information Flows 241

22、0.2.3 Information Flow Sequences 2510.3 Functional Entity Actions 2610.4 Functional Entity Behaviour 2710.5 Allocation of Functional Entities to Physical Locations 2911 SS-CNIR Stage 2 Description 3011.1 Functional Model 3011.1.1 Functional Model Description 30- iv -11.1.2 Description of the Functio

23、nal Entities 3011.1.3 Relationship of the Functional Model to the Basic Call Functional Model 3011.2 Information Flows 3011.2.1 Definition of Information Flows 3011.2.2 Relationship of Information Flows to Basic Call Information Flows 3011.2.3 Information Flow Sequences 3111.3 Functional Entity Acti

24、ons 3111.4 Functional Entity Behaviour 3211.5 Allocation of Functional Entities to Physical Locations 34Annex A - Structure and Content of a PISN Name 351ScopeThis Standard specifies the supplementary services Calling Name Identification Presentation (SS-CNIP), ConnectedName Identification Presentat

25、ion (SS-CONP) and Calling/Connected Name Identification Restriction (SS-CNIR),which are applicable to various basic services supported by Private Integrated Services Networks (PISNs). Basicservices are specified in ECMA-142.Calling Name Identification Presentation (CNIP) is a supplementary service w

26、hich is offered to the called user andwhich provides the name of the calling user (calling party name) to the called user.Connected Name Identification Presentation (CONP) is a supplementary service which is offered to the calling userand which provides to the calling user the following: the name of

27、 the user who answers the call (connected party name); optionally the name of the alerting user (called party name); optionally the name of the called user who cannot be reached (busy party name).Calling/Connected Name Identification Restriction (CNIR) is a supplementary service which is offered to

28、a user torestrict presentation of that users name to another user.Service specifications are produced in three stages, according to the method described in ETS 300 387.This Standard contains the stage 1 and 2 specifications of the Name Identification supplementary services. The stage 1specifications

29、 (clauses 6, 7 and 8) specify the supplementary services as seen by users of PISNs. The stage 2specifications (clauses 9, 10 and 11) identify the functional entities involved in the supplementary services and theinformation flows between them.2 ConformanceIn order to conform to this Standard, a stag

30、e 3 standard shall specify signalling protocols and equipment behaviour thatare capable of being used in a PISN which supports the supplementary services specified in this Standard. This meansthat, to claim conformance, a stage 3 standard is required to be adequate for the support of those aspects o

31、f clauses 6, 7and 8 (stage 1) and clauses 9, 10 and 11 (stage 2) which are relevant to the interface or equipment to which the stage 3standard applies.3 References (normative)The following standards contain provisions which, through reference in this text, constitute provisions of this Standard.All

32、standards are subject to revision, and parties to agreements based on this Standard are encouraged to investigate thepossibility of applying the most recent editions of the standards indicated below.In the case of references to ECMA Standards that are aligned with ISO/IEC International Standards, th

33、e number of theappropriate ISO/IEC International Standard is given in brackets after the ECMA reference.ECMA-142 Private Integrated Services Network - Circuit-mode 64 kbit/s Bearer Services - ServiceDescription, Functional Capabilities and Information Flows (International StandardISO/IEC 11574)ECMA-

34、173 Private Integrated Services Network - Specification, Functional Model and Information Flows -Call Diversion Supplementary Services (International Standard ISO/IEC 13872)ECMA-178 Private Integrated Services Network - Inter-Exchange Signalling Protocol - Call TransferSupplementary Service (Interna

35、tional Standard ISO/IEC 13869)ISO/IEC 8859-1 Information processing - 8-bit single-byte coded graphic character sets - Part I: Latin alphabetNo.1 (1987)ISO/IEC 11579-1 Information technology - Telecommunications and information exchange between systems -Private Integrated Services Network - Part 1:

36、Reference configuration for PISN Exchanges(PINX)- 2 -ETS 300 387 Private Telecommunication Network (PTN); Method for the specification of basic andsupplementary services (1994)ITU-T Rec. I.112 Vocabulary of terms for ISDNs (1993)ITU-T Rec. I.210 Principles of telecommunication services supported by

37、an ISDN and the means to describe them(1993)ITU-T Rec. Z.100 Specification and description language (1993)4 DefinitionsFor the purposes of this Standard, the following definitions apply.4.1 External definitionsThis Standard uses the following terms defined in other documents: Basic Service (ITU-T Re

38、c. I.210) Private Integrated Services Network (PISN) (ISO/IEC 11579-1) Private Integrated Services Network Exchange (PINX) (ISO/IEC 11579-1) Service (ITU-T Rec. I.112) Signalling (ITU-T Rec. I.112) Supplementary Service (ITU-T Rec. I.210) User (ECMA-142)This Standard refers to the following basic ca

39、ll functional entities defined in ECMA-142: Call Control (CC) Call Control Agent (CCA)This Standard refers to the following basic call information flows defined in ECMA-142: r1 r2 r3This Standard refers to the following basic call information flows defined in ECMA-142: DISCONNECT request/indication

40、REPORT request/indication RELEASE request/indication SETUP request/indication SETUP response/confirmation SETUP REJECT request/indication4.2 Other definitions4.2.1 Additional network featureA capability, over and above that of a basic service, provided by a PISN, but not directly to a PISN user.4.2.

41、2 Application identifierManufacturer specific information which can imply the structure of the name information.- 3 -4.2.3 BusyAn ISDN destination is considered to be busy if either a “network determined user busy“ or a “user determineduser busy“ conditions occurs.4.2.4 Busy party nameThe name of th

42、e called user who cannot be reached because of a busy condition.4.2.5 Call, basic callAn instance of the use of a basic service.4.2.6 Calling party nameThe name of the calling user.4.2.7 Connected party nameThe name of the user who answers the call.4.2.8 Called party nameThe name of the alerting use

43、r.4.2.9 NameA string of maximum 50 characters which is used for the name identification of the PISN user of a call.NOTE 1The structure and content of a name are defined in annex A.4.2.10 Terminal, terminal equipmentAn item of equipment attached to a PISN to provide access for a user to one or more s

44、ervices.5 AcronymsCC Call Control (functional entity)CCA Call Control Agent (functional entity)CONP Connected Name Identification PresentationCNIP Calling Name Identification PresentationCNIR Calling/Connected Name Identification RestrictionFE Functional EntityISDN Integrated Services Digital Networ

45、kPISN Private Integrated Services NetworkPINX Private Integrated Services Network ExchangeSDL Specification and Description LanguageSS-CONP Connected Name Identification Presentation supplementary serviceSS-CNIP Calling Name Identification Presentation supplementary serviceSS-CNIR Calling/Connected

46、Name Identification Restriction supplementary serviceTE Terminal Equipment6 SS-CNIP Stage 1 Description6.1 Description6.1.1 General DescriptionCalling Name Identification Presentation (SS-CNIP) is a supplementary service which is offered to the calleduser and which provides the name of the calling u

47、ser (calling party name) to the called user.- 4 -The PISN provides the calling party name to the called user if available and allowed (according to the restrictionsdefined in 6.2.3.1) whenever an incoming call is presented.The possible provision of the calling party name by the calling user to the P

48、ISN is outside the scope of thisStandard.6.1.2 Qualifications on Applicability to Telecommunication ServicesThis supplementary service is applicable to all basic services defined in ECMA-142.6.2 Procedures6.2.1 Provision/WithdrawalThis Supplementary service shall be generally available.Some users ma

49、y have a service profile which permits the override of calling name identification restriction.6.2.2 Normal Procedures6.2.2.1 Activation/Deactivation/Registration/InterrogationSS-CNIP shall be permanently activated. No information needs to be registered with the PISN for thissupplementary service and therefore interrogation is not applicable.6.2.2.2 Invocation and OperationThe PISN shall provide the called user with the calling party name at the same time as indicating an incomingcall.The PISN may truncate the calling party name in accordance with what the user can