DOD MIL-J-89100-1995 JOINT OPERATIONS GRAPHIC SERIES 1501A AND 1501 (JOG AIR GROUND)《1501A和1501联合作战图解系列(空 地榫头)》.pdf

《DOD MIL-J-89100-1995 JOINT OPERATIONS GRAPHIC SERIES 1501A AND 1501 (JOG AIR GROUND)《1501A和1501联合作战图解系列(空 地榫头)》.pdf》由会员分享，可在线阅读，更多相关《DOD MIL-J-89100-1995 JOINT OPERATIONS GRAPHIC SERIES 1501A AND 1501 (JOG AIR GROUND)《1501A和1501联合作战图解系列(空 地榫头)》.pdf（331页珍藏版）》请在麦多课文档分享上搜索。

1、MIL-J-IYLOO 999990b 2032458 4Ca7 pEq MIL-J-89100 (DMA) SUPERSEDING - PS/ lAE/201 PS/ 3BB/ 2 o 1 November 197 6 MILITARY SPECIFICATIONS JOINT OPERATIONS GRAPHICS SERIES 15Oi.A AND 1501 (JOG AIR/GROUND) This specification irr approved for use by all Departments and Agencies of the Department of Defens

2、e. 1. SCOPE 1.1 m. This specification defines requirements for the Defense Mapping Agencys (DMA) 1:250,000 Scale Joint Operations Graphics Series 1501A (Air) and 1501 (Ground). 1.2 Purgose. The purpose of this specification is to assure uniformity of treatment among all mapping and charting elements

3、, primarily DMA and its contractors, engaged in a coordinated production and maintenance program for this product. requirements are stated in terms of DMAs Feature Attribute Coding Standard (FACS), to maintain consistency between various production methods. The use of FACS in this specification is n

4、ot intended to imply any external digital data coding standard used by DMAs Digital Production System (DPS). DPS is the primary intended, but not exclusive, method for production of this product at this time. The Digital Geographic Information Exchange Standard (DIGEST) Feature Attribute Coding Cata

5、log (FACC) , not FACS, is the approved coding standard for the exchange of digital geographic data, as well as the standard for DMAs Vector Product Format product line. FACC may be included in, or replace FACS in a future edition of this specification. Feature )Beneficial comments (recommendations,

6、additions, deletions) and any peztiaeat data which may be of use in improving this document should be addressed to: Director, Defense Mapping Agency, ATTN.: PR, MAIL STOP A-13, 8613 Lee Highway, Fairfax, VA 22031-2137 by using the Standardization Document Improvement Proposal (DD Form 1426) appearin

7、g at the end of this document or by letter. AMSC N/A AREA MCGT UTION S-NT 8. Approved for public release; distribut ion unlimited. Licensed by Information Handling Services Licensed by Information Handling ServicesMIL- 5-89100 . This specification is 1.3.1 mitv ciassification * UNCLASSIFIED. The sec

8、urity classification of the products generated by the use of this specification will be the lowest .category practicable. When it is necessary to assign a security classification to the product, it shall be in accordance with established national security procedures. 2. APPLICABLE DOCUMENTS 2.1 Gove

9、rnment. . The 2.1.1 -.if 3 cat ions, standards, and hadbookg .I following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the current Department of Defense Index of Spe

10、cifications and Standards (DODISS) and the supplement thereto, cited in the solicitat ion (see 6.2 ) . STANDARDS MILITARY MIL-HDBK-129 -Military Levels of Protection MIL-STD-2403 -MC UPS and UTM Grids“ (Copies of DMA TM 8358.1 and DMA TM 8358.2 are available from the Defense Mapping Agency Combat Su

11、pport Center, Washington, D.C. 20816-0010). DoD Standard Printing Color (SPC) Catalog (Copies of the DoD Standard Printing Color Catalog is available from Defense Mapping Agency Graphic Arts, Bethesda, Maryland 20816-0010. applicable to this specification. 2.2 Bon - Govexment 9- This section is not

12、2.3 i.e, ., 200 Universal Transverse Mercator (UTM), and Universal Polar Stereographic (UPS). e. When it is specified that a secondary grid be shown and when the secondary grid differs uniformly from the major grid, a coordinate conversion note may be used in lieu of showing the secondary grid.“ Ref

13、erence DMA TM 8358.1, Datums, Ellipsoids, Grids and Grid Reference Systems and DMA TM 8358, Series Transition Phase Standard Operating Procedures, dated 21 September 1989. When a coordinate conversion note is necessary for a secondary grid the note will be patterned after the following example : COO

14、RDINATE CONVERSION WGS 84 TO ED Grid: Add 30 meters E., Subtract 9 meters N. Geographic: Add 1.1“ Long., Subtract 0.1“ Lat. This note will be in Swiss 742, 7 point condensed, upper and lower case, the box line weight will be .52 mm. The note will be positioned in the map margin area according to one

15、 of the following style sheet arrangements: (1) 1501 Arrangement No. 1 - Directly above the Grid Reference Box and centered, top to bottom, between that and the “Depths in Meters“ note with the center being at 9 mm. and centered left to right at 54 mm. across the top of the Grid Reference Box. (2) 1

16、501 Arrangement No. 2 - In the lower left margin directly below the translated “Depths in Meters“ note and centered top to bottom between that and the Grid Reference Box with the center being at 14 mm. and centered left to right to the translated “Depths in Meters“ note with the center being at 17 m

17、m. (3) 1501-AIR Arrangement No. 1 - Directly above the Grid Reference Box and centered top to bottom between that and the “Depths in Feet“ note with the center being at 10 mm., and centered left to right at 54 mm. across the top of the Grid Reference Box. (4) 1501-AIR Arrangement No. 2 - In the lowe

18、r left margin directly below the translated “Depths in Feet“ note and centered top to bottom between that and the Grid Reference Box with the center being at 14 mm. and centered left to right to the translated “Depths in Feet“ note with the center being at 17 mm. 3.11 min data. 3.11.1 Marain data: G

19、em. a. The JOG style sheets (Appendix B or C) graphically illustrates the design, composition and location of margin data. All margin data contained on the graphic shall be within the trim limits of 56 cm by 74 cm. 8 Licensed by Information Handling Services Licensed by Information Handling Services