DOD A-A-54865-1993 SYRINGE IRRIGATING BLADDER EVACUATING TOOMEY《膀胱排泄注射器》.pdf

《DOD A-A-54865-1993 SYRINGE IRRIGATING BLADDER EVACUATING TOOMEY《膀胱排泄注射器》.pdf》由会员分享，可在线阅读，更多相关《DOD A-A-54865-1993 SYRINGE IRRIGATING BLADDER EVACUATING TOOMEY《膀胱排泄注射器》.pdf（5页珍藏版）》请在麦多课文档分享上搜索。

1、A-A-548b5 W 9999974 OL44Lb 853 W A-A-54 86 5 30 June 1993 COMMERCIAL ITEM DESCRIPTION SYRINGE, IRRIGATING, BLADDER EVACUATING Toomey The General Services Administration has authorized the use of this Commercial Item Description. This commercial item description covers a glass Toomey bladder evacuati

2、ng irrigating syringe. Salient characteristics: Material. fabricated from borosilicate glass. shall be fabricated from corrosion-resistant metal. Style and desiqn. centimeters (cc) Toomey type evacuating syringe with syringe tip adapter. standard cystoscopes and resectoscopes. adapter shall be capab

3、le of withstanding repeated autoclaving without corrosion or other detrimental effects. The barrels, plungers and adapters shall be interchangeable between syringes without any leakage during use. of the barrel shall have a smooth, uniform surface, free from pits, grind marks or other imperfections.

4、 The plunger shall glide through the barrel while maintaining a fluid- tight fit. The barrel shall be transparent. The outside surface of the barrel shall be marked with main graduations every 5 cc and subgraduations every 1 cc. Main graduation markings shall be at least 33 percent longer than subgr

5、aduations. numerical volume indicated. The barrel shall have the name or registered trademark of the contractor. shall be packaged in an individual container that shall protect the syringe during shipment and storage. The syringe plunger and barrel shall be The syringe tip adapter The syringe shall

6、be a 50 cubic The adapter shall be designed to fit all The syringe and The inside Each 1Occ graduation shall also have the Each syringe AMSC N/A FSC 6515 DISTRIBUTION STATEMENT A. distribution is unlimited. 0 Approved for public release; Provided by IHSNot for ResaleNo reproduction or networking per

7、mitted without license from IHS-,-,-A-A-548b5 4 0144817 7T A-A-54 8 65 Leakaae. The adapter shall be attached to the syringe and then attached in a horizontal position to a water pressure source having a pressure gauge. brought up to 25 psig. the 50 percent point of the graduated capacity where it s

8、hall remain for 10 seconds. The plunger shall then be withdrawn to the 100 percent point and held for another 10 seconds. During each 10 second period there shall not be enough water to pass the connection between the adapter and the syringe or between the plunger tip and the barrel of the syringe t

9、o produce a falling drop. After each successive test any water that may have passed shall be wiped with a dry cloth and the next test applied. The syringe shall be removed from the pressure source and the water shall be ejected at the rate of 1/2 cc per second until the plunger reaches the zero mark

10、. separate from the syringe. The water pressure shall be The plunger shall be withdrawn to The adapter shall not leak or Workmanship. detract from its appearance or impair its serviceability. The syringe shall be free from defects which Unit. Each (EA). One syringe as specified, constitutes one unit

11、. Oualitv Assurance Provisions. Responsibility for inmection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. purchase order, the contractor may use his own or any facilities suitable

12、for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescri

13、bed requirements. Except as otherwise specified in the contract or Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Governments request, at any time, or from time to time, during the perf

14、ormance of the contract and for a period of three years after the delivery of the supplies to which such records relate. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-548b5 m 9999974 0144818 626 m A-A- 54 a 6 5 InsDection. Inspection, as used

15、 herein, is defined as both examination (such as visual or auditory investigation without the use of special laboratory appliances or procedures) and testing (determination by technical means of physical and chemical properties) of the item. Examination. Examination shall be conducted to determine S

16、amDlina for examination. compliance with specification requirements. conducted in accordance with MIL-STD-105 and as specified herein. Unit of product for examination purposes shall be one syringe as specified. Sampling shall be inspection level II with an Acceptable Quality Level (AQL) of 1.0. Samp

17、ling for examination shall be Tests. Tests shall be conducted to determine compliance with specification requirements. Where feasible, the same sample shall be used for the determination of two or more test characteristics. Samplina for tests. Sampling for tests shall be conducted in accordance with

18、 MIL-STD-105 and as specified. for test purposes shall be one syringe. Sampling shall be inspection level S-2 with an AQL of 1.0. Contractor certification. maintain substantiating evidence that the product offered meets the salient characteristics of this Commerical Item Description, and that the pr

19、oduct conforms to the producers own drawings, specifications, standards, and quality assurance practices. The government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. Unit of produ

20、ct The contractor shall certify and Metric products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, providing they fall within the tolerances specified using conversion tables contained in the latest revision of Federal

21、 Standard No. 376, and all other requirements of this document are met. If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch-pound units, a request should be made to the contracting officer to determine if the product is acceptable. The c

22、ontracting officer has the option of accepting or rejecting the product. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-5 48 b5 9999974 OL448L9 5b2 A-A-5 4 8 65 Recrulatorv requirements. Federal Food, Drua and Cosmetic Act. If the product cove

23、red by this document has been determined by the U.S. Food and Drug Administration to be under its jurisdiction, the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of the Federal Food, Drug and Cosmetic Act, as amended, and re

24、gulations promulgated thereunder. In addition, the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of all other applicable Federal, State, and local statutes, ordinances, and regulations. Recovered materials. The offeror/contr

25、actor is encouraged to use recovered material in accordance with Federal Acquisition Regulation Subpart 23.4 to the maximum extent practical. Preservation, packaaina, D ackina, labelina, and markinq. Unless otherwise specified, preservation, packaging and packing shall be to a degree of protection t

26、o preclude damage to containers and/or contents thereof under normal shipping conditions, handling, etc., involving shipment from the supply source to the receiving activity, plus reshipment from receiving activity, and shall conform to applicable carriers rules and regulations. Intermediate and ext

27、erior package quantities and labeling and marking shall be as specified in the contract and/or order. Orderina data. Intermediate/exterior package quantities, labeling, and marking must be as specified in the contract and/or order. NOTE: The following National Stock Number and its respective Item Id

28、entification is covered by this document: National Stock Number Item Identification 6515-00-926-1487 SYRINGE, IRRIGATING, BLADDER EVACUATING, Toomey 50 cc 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-548b5 9999974 0344820 284 H A-A-5 4 8 6 5

29、 MILITARY INTERESTS: Custodians: Army-MD Navy-MS Air Force-O3 Preparing Activity: DOD-MB Agent : DLA-DM CIVIL AGENCY COORDINATING ACTIVITIES: VA-OSS USPHS FDA-MPQAS Project No. 6515-5573 Location: c:marksyringe4 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-