DLA SMD-5962-92244 REV C-1996 MICROCIRCUIT DIGITAL FAST CMOS OCTAL BIDIRECTIONAL TRANSCEIVER WITH THREE-STATE OUTPUTS TTL COMPATIBLE INPUTS AND LIMITED OUTPUT VOLTAGE SWING MONOLIT.pdf

《DLA SMD-5962-92244 REV C-1996 MICROCIRCUIT DIGITAL FAST CMOS OCTAL BIDIRECTIONAL TRANSCEIVER WITH THREE-STATE OUTPUTS TTL COMPATIBLE INPUTS AND LIMITED OUTPUT VOLTAGE SWING MONOLIT.pdf》由会员分享，可在线阅读，更多相关《DLA SMD-5962-92244 REV C-1996 MICROCIRCUIT DIGITAL FAST CMOS OCTAL BIDIRECTIONAL TRANSCEIVER WITH THREE-STATE OUTPUTS TTL COMPATIBLE INPUTS AND LIMITED OUTPUT VOLTAGE SWING MONOLIT.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、. DEFENSE LOGISTICS AGENCY DEFENSE SUPPLY CENTER, COLUMBUS 3990 EAST BROAD STREET COLUMBUS, OH 432165000 IN REPLY REFER TO: DSCC-VAC (Mr. Miesse/(614) 692-0543 (DSN 850) SEP 26 SUBJECT: Notice of Revision (NOR) 5962-R203-96 for Standard Microcircuit Drawing (SMD) 5962-92244 Military/Industry Distrib

2、ution The enclosed NOR is approved for use effective as of the date of the NOR. In accordance with MIL-STD-100 SMD holders should, as a minimum, handwrite those changes described in the NOR to sheet 1 of the subject SMD. After completion, the NOR should be attached to the subject SMD for future refe

3、rence. Those companies who were listed as approved sources of supply prior to this action have agreed to actions taken on devices for which they had previously provided DSCC a certificate of compliance. This is evidenced by an existing active current certificate of compliance on file at DSCC with a

4、DSCC record of verbal coordination. The certificate of compliance for these devices is considered concurrence with the new revision unless DSCC is otherwise notified. If you have comments or questions, please contact Mr. Bernard Miesse at (614) 692-0543 (DSN 850). 1 Encl Chief, Custom Microelectroni

5、cs Team Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SND-5962-72244 REV C b 0089403 499 i. DATE NOTICE OF REVISION (NOR) (YYMMDD) Form Approved 96-09-06 OMB No. 0704-0188 THIS REVISION DESCRIBED BELOW HAS BEEN AUTHORIZED FOR THE DOCUMENT LISTED. 7

6、. CAGE CODE 67268 I b. ADDRESS (Street, City, State, Zip Code) 5. CAGE CODE 5962-R203-96 . ORIGINATOR Defense Supply Center, Columbus 67268 8. DOCUMENT NO. 5962-92244 3990 East Broad Street Columbus, OH 43216-5000 ,. TYPED NAME (First, Middle Initial, Last) I I I. TITLE OF DOCUMENT MICROCIRCUIT, DIG

7、ITAL, FAST CMOS, OCTAL BIDIRECTIONAL TRANSCEIVER, WITH THREE-STATE OUTPUTS, lTL COMPATIBLE INPUTS AND LIMITED OUTPUT VOLTAGE SWING, MONOLITHIC 10. REVISION LETTER a. CURRENT b. NEW SILICON B C 11. ECP NO. NIA a Sheet 1: Sheet 9: X (1) Existing document supplemented by the NOR may be used in manufact

8、ure. (2) Revised document must be received before manufacturer may incorporate this change. (3) Custodian of master document shall make above revision and furnish revised document. Revisions ltr column; add I1C8l. Revisions description colunn; add IlChanges in accordance with NOR 5962-R203-96I1. Rev

9、isions date colum; add 1196-09-0611. Revision level block; change 11611 to V8I. Rev status of sheets; for sheet 1, change from I1B4 to I1C1l, and sheet 9, change from I1A1l to lT1l. Table I, low level ground bounce noise, VOLVI device types 01, 02 and 03; change maxim limit from Revision level block

10、; change 81A11 to V1. lt-12O0“ to “-160011. d. TITLE Chief, Custom Microelectronics 15a. ACTIVITY ACCOMPLISHING REVISION DSCC-VAC e. SIGNATURE Monica L. Poelking b. REVISION COMPLETED (Signature) Bernard J. Miesse f. DATE SIGNED (Y YMMDD) 96-09-06 c. DATE SIGNED (YYMMDD) 96-09-06 Provided by IHSNot

11、for ResaleNo reproduction or networking permitted without license from IHS-,-,-m qqq999b 0054LOB T77 DEFENSE LOGISTICS AGtNCY DEFENSE ELECTRONICS SUPPLY CENTER DAMON. OH 45444-5765 IN REPLY REFER TO DESC-ELDC (Mr. Nguyen/(AV 986) 5 13-296-6023/tn) SUBJECT: Notice of Revision (NOR) 5962-R101-94 for S

12、tandardized Military Drawing (SMD) 5962-92244 Military/Industry Distribution The enclosed NOR is approved for use effective as of the date of the NOR. In accordance with MIL-STD-100 SMD holders should, as a minimum, handwrite those changes described in the NOR to sheet 1 of the subject SMD. After co

13、mpletion, the NOR should be attached to the subject SMD for future reference. Those companies who were listed as approved sources of supply prior to this action have agreed to actions taken on devices for which they had previously provided DESC a certificate of compliance. This is evidenced by an ex

14、isting active current certificate of compliance on file at DESC along with a DESC record of verbal coordination. The certificate of compliance for these devices is considered concurrence with the new revision unless DESC is otherwise notified. DESC has received and accepted a certificate of complian

15、ce from Cypress Semiconductor, CAGE 65786, for PINs 5962-922444MRX7 5962-922444M2X, 5962-9224405MRX, 5962-9224405M2X, 5962-9224406MRX, and 5962-9224406M2X which have the corresponding vendor similar part numbers CY54FCT645TDMB, CY54FCT645TLMB, CY54FCT645ATDMB, CY54FCT645ATLMB, CY54FCT645CTDMB, and C

16、Y54FCT645CTLMB7 respectively, and is now considered an approved source of supply. Performance Semiconductor, CAGE 75569, is no longer an approved source of supply for PINs 5962-922444MRX, 5962-9224404M2X, 5962-9224405MRX, 5962-9224405M2X9 5962-9224406MRX, and 5962-9224406M2X which have the correspon

17、ding vendor similar part numbers P54FCT645TDB, P54FCT45TLB, P54FCT645ATDB7 P54FCT645ATLB, P54FCT645CTDB, and P54FCT645CTLB, respectively. MIL-BUL-i03 will reflect these changes in the next revision. If you have comments or questions, please contact Thanh Nguyen at (AV)986-6023 or (513)296-6023. 1 En

18、cl ONICA L. POELKING Chief, Custom Microelectronics Branch Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-qb 0054309 903 NOTICE OF REVISION (NOR) lhis revision described below has been authorized for the document listed. I. DATE (YYMMDD) 94-03-29 Fo

19、rm Approved OMB No. 0704-0188 b. ADDRESS (Street, City, State, Zip Code) 4. ORIGINATOR 2. PROCURING ACTIVITY NO. 5. CAGE CODE 6. NOR NO. 3. DODAAC a. TYPED NAME (First, Middle Initial, Last 1 5962-R101-94 1507 Uilmington Pike 7. CAGE CODE 8. DOCUMENT NO. Defense Electronics Supply Center Dayton, OH

20、45444-5765 5962-92244 TRANSCEIVER, WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS AND LIMITED OUTPUT VOLTAGE SWING, MONOLITHIC SILICON 9. TITLE OF DOCUMENT MICROCIRCUIT, DIGITAL, FAST CMOS, OCTAL BIDIRECTIONAL a. CURRENT b. NEW N/A A B 1 IO. REVISION LETTER a. (X one) I ECP No- X (1) Existing docum

21、ent supplemented by the NOR may be used in manufacture. b. ACTIVITY AUTHORIZED TO APPROVE CHANGE FOR GOVERNMENT Sheet 1: Revisions Ltr column; add “B“. Revisions description column; add “Changes in accordance with NOR 5962-R101-94ft. Revisions date column; add “94-03-29“. Revision level block; chang

22、e from “A“ to “8“. Rev status of sheets; for sheets 1 and 6, change from “A“ to itit. Table I, three-state output leakage current high, IOZH, device types 04, 05, and 06; change maximum limits from “0.1 PA to “1.0 ,UA“ for subgroup 1, from “2.0 PA“ to “1.0 pi“ for subgroup 2, and from “2.0 PA to “10

23、.0 PA“ for subgroup 3. Table I, three-state output leakage current Lou, IozL, device types 04, 05, and 06; change maximum limits from “-0.1 PA to “-1.0 PA“ for subgroup I, from “-2.0 plif to “-1.0 pAtf for subgroup 2, and from “-2.0 PA“ to “-10.0 PAt1 for subgroup 3. Revision level block; change fro

24、m “A“ to “8“. Table I, input current high, IIH, device types 04, 05, and 06; for control inputs, change maximum limits For sheet 7, add “8“. Sheet 6: Sheet 7: from “0.1 PA to “1.0 PA for subgroups 1 and 2 and from “1.0 PA to “5.0 PA for subgroup 3. For 1/0 pins, change maximum limits from “0.2 PAIt

25、to “1.0 PA“ for subgroups 1 and 2 and from “3.0 PA“ to “15.0 PA“ for subgroup 3. , device types 04, 05, and 06; for control inputs, change maximum limits from “-0.1 PA“ to “-.fLO PA for subgroups 1 and 2 and from “-1.0 PA“ to “-5.0 PA“ for subgroup 3. For 1/0 pins, change maximum limits from “-0.2 P

26、A to “-1.0 PA“ for subgroups 1 and 2 and from ll-3.a Table I, input current Lou, I to li-15.a PA“ for subgroup 3. Revision level block; add “8“. c. TYPED NAME (First, Middle Initial, Last) DECC-ELDC I 1 (2) Revised document must be received before manufacturer may incorporate this change. Monica L.

27、Poelking d. TITLE Chief, Custom Microelectronics 15a. ACTIVITY ACCOMPLISHING REVISION DESC-ELDC e. SIGNATURE f. DATE SIGNED (YYMMDD) Monica L. Poelking 94-03-29 b. REVISION COMPLETED (Signature) c. DATE SIGNED (WMMDD) Thanh V. Nguyen 94-03-29 Provided by IHSNot for ResaleNo reproduction or networkin

28、g permitted without license from IHS-,-,-9999996 0054110 b25 D NOTICE OF REVISION (NOR) (See MIL-STO-480 for instructions) This revision described below has been authorized for the document listed. Form Approved OM6 NO. 0704-0188 DATE (-1 93-06-18 1 1. ORIGIIIATOR WIVE AMI AWRESS 2. CAam 3. NOR NO.

29、1 Defense Electronics Supply Center Clayton, Ohio 45444-5270 67268 I 5962-R179-93 1 I 6. TITLE OF IMCENi I HICROCIRCUITS, DIGITAL, FAST Mos DCTAL BIDIRECTIOWAL TWVISCEIVER WITH =-=AIE murs. ni. COIIPATIELE INPUTS AMI LIHITED mur VOLTAGE SWIN6, )IDIIOLIMIC SILICON 4. CAGEcooE 5. wcv14EKT NO. 5962-922

30、44 67268 I 7. REVISIOH LEmR (Current) Neu (New) A I no registered users 9. COWFIGIRATIOW ITEH (OR %Sroc) TO WHICH ECP APPLIES b. ACTIVITY AUTHORIZED TO APPROVE CHANGE FOR GOVERNMENT DESC-ECC 12. ACTIVITY ACCWPLISHING REVISION DESC-ECC SIGNATURE AND TITLE DATE (YYMMD) Monica L. Poelking 93-06-18 Chie

31、f, Custom Microelectronics REVISION COMPLETED (Signature) DATE (YYMMDD) Joseph A. Kerby 93-06-18 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-9999996 0054LLL 561 THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS AND AGENCIES OF THE DEPARTMENT O

32、F DEFENSE AMSC NIA I REV I SI ONS OCTAL BIDIRECTIONBT TRANSCEIVER WITH APPROVED BY Monica L. Poelking THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS AND LIMITED OUTPUT VOLTAGE SWING, MONOLITHIC SILICON DRAWING APPROVAL DATE 93-04-28 _I SIZE CAGE CODE 5962-92244 REVISION LEVEL A 67268 SHEET 1 OF 22 Provi

33、ded by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-W 9999996 0054112 4TB W STANDARDIZED MILITARY DRMING I DEFENSE ELECTRONICS SUPPLY CENTER I 1. SCOPE 1.1 Scope. This drawing forms a part of a one part - one part number documentation system (see 6.6 herein).

34、 Two product assurance classes consisting of military high reliability (device classes B. Q, and M) and space application (device classes S and V), and a choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). Device class M microcircuits re

35、present non-JAN class E microcircuits in accordance with 1.2.1 of MIL-STO-863, “Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices“. When available, a choice of radiation hardness assurance (RHA) levels are reflected in the PIN. I 1.2 m. The PIN shall be as shown in

36、the following exanple: 5r , 92244 t Jl, 1 1 Federal RHA Device Device Case Lead stock class designator type class outline finish designator (See 1.2.1) (See 1.2.2) designator (See 1.2.4) (See 1.2.5) (See 1.2.3) -I- Drawing number 1.2.1 RHA desianator. Device classes M, E, and S RHA marked devices sh

37、all meet the MIL-M-38510 specified RHA levels and shall be marked with the appropriate RHA designator. Device classes Q and V RHA marked devices shall meet the MIL-1-38535 specified RHA levels and shall be marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. 1.2.2 Devic

38、e tme(s). The device type(s) shall identify the circuit function as follows: Devi ce type Generic number Circuit function 01, 04 54FCT645T Octal bidirectional transceiver with three-state outputs, TTL 02, 05 54FCT645AT Octal bidirectional transceiver with three-state outputs, TTL 03, 06 54FCT645CT O

39、ctal bidirectional transceiver with three-state outputs, TTL conpatible inputs and limited output voltage swing. compatible inputs and limited output voltage swing. conpatible inputs and limited output voltage swing. 1.2.3 Device class desisnator. The device class designator shall be a single letter

40、 identifying the product assurance level as follows: Device class kvice requirements documentation SIZE 5962-92244 A M I DAYTON, OHIO 45444 Vendor self-certif ication to the requirements for non-JAN class E microcircuits In accordance with 1.2.1 of MIL-STO-E83 REVISION LEVEL SHEET 2 B or S Q or V Ce

41、rtification and qualification to MIL-M-38510 Certification and qualification to MIL-1-38535 1.2.4 Case outlines),. The case outline(s) shall be as designated in MIL-STD-1835, and as follows: Outline letter Descriptive des isnator Termi na 1 s Packaqe style R S 2 GDIPl-TZO or CDIP2-T20 20 dual - in-

42、1 ine GDFP2-F20 or CDFP3-FZO 20 . flat package CQCC1-N20 20 leadless-chip-carrier package 1.2.5 Lead finish. The lead finish shall be as specified in HIL-H-38510 for classes H, 8, and S or MIL-1-38535 for classes Q and V. Finish letter “X“ shall not be marked on the microcircuit or its packaging. Th

43、e “X“ designation is for use in specifications when lead finishes A, E, and C are considered acceptable and interchangeable without preference. I I I I Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-999999b 0054113 334 STANDARDIZED MILITARY DRAWING

44、DEFENSE ELECTRONICS SUPPLY CENTW DAYTON, OHIO 45444 1.3 Absolute maximum ratinqs. I/ 2J A/ Supply voltage range (V ) - - - - - - - - - - - - - - - - - DC input voltage range f6 ,) - - - - - - - - - - - - - - - - DC output voltage range (6, T) - - - - - - - - - - - - - - - OC input clamp current (I K

45、y (V = -0.5 V) - - - - - - - - - DC output clamp current (1 K) (6 = -0.5 V and t7.0 V) - - DC output source current (P p?SIToutput - - - - - - - - - - DC output sink current (IoL? per output - - - - - - - - - - - DC g%nd current fi ) - - - - - - - - - - - - - - - - - - Storage temperature F!Rge (T -

46、 - - - - - - - - - - - - - Case temperature under bias tfBIAS) - - - - - - - - - - - - - Maximum power dissipation (P ) - - - - - - - - - - - - - - - Lead temperature (soldering, 10 seconds) - - - - - - - - - - Thermal resistance, junction-to-case (O ) - - - - - - - - - JC Junction temperature (TJ)

47、- - - - - - - - - - - - - - - - - - DC V current (Ic ) - - - - - - - - - - - - - - - - - - - - 0 SIZE 5962-92244 A REVISION LEVEL SHEET 3 1.4 Recomnded operatinq conditions. 3 Supply voltage range (Vc ) - - - - - - - - - - - - - - - - - input voltage range (V N - - - - - - - - - - - - - - - - - - Ou

48、tput voltage range (6 - - - - - - - - - - - - - - - - - Maxirrum low level inputO! mA I 06 Three-state output leakage current 1 ow 3020 VoL1 For all inputs affecting I All I I output under test :IN ir ;IL = 0.8 V 4/ I ForIll1 other inbhts I Io:! 300 rJ j - Vcc or GND I I See footnotes at en 4.5 V I

49、1,2,3 1 I 0.20 I V I I 51 61 STANDARDIZED SIZE MILITARY DRAWING A DEFENSE ELECTRONICS SUPPLY CENTER DAYTON, OHIO 45444 - OE = V or VIL ForIkll other inputs VIN = Vcc or GND VIH tH2.0 v V - 0.8 V 5962-92244 REVISION LEVEL SHEET 6 IozL OE = V or VIL s/ g/ I F TTL input levels 1 3005 - inputs IN or GND - 3.4 v Quiescent supply 1 ICCH current output high 3005 I SIZE A Quiescent supply current