DLA QML-19500-QPD-2013 Semiconductor Devices General Specification for.pdf
《DLA QML-19500-QPD-2013 Semiconductor Devices General Specification for.pdf》由会员分享,可在线阅读,更多相关《DLA QML-19500-QPD-2013 Semiconductor Devices General Specification for.pdf(986页珍藏版)》请在麦多课文档分享上搜索。
1、QML-195002013-08-09QUALIFIED PRODUCT LISTOFPRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATIONMIL-PRF-19500Semiconductor Devices, General Specification forThis list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and such listing
2、of a product is not intended to and does not connote endorsement of the product by the Department of Defense. This list is subject to change without notice; revision or amendment of this list will be issued as necessary. The listing of a product does not release the contractor from compliance with t
3、he specification requirements.THE ACTIVITY RESPONSIBLE FOR THIS QUALIFICATION DATASET is the DLA Land and Maritime - VQ, Columbus, OH 43218-3990.DLA Land and Maritime-VQ supplemental information available at: http:/www.landandmaritime.dla.mil/programs/qmlqpl/QPLdetail.asp?QPL=19500This listing of di
4、screte semiconductors applies only to products produced on the MIL-PRF-19500 certified/approved line(s) at the plant(s) listed at the back of the QML for the applicable manufacturer. The number in parenthesis next to some manufacturers listings correlates to the plant(s) listed for the manufacturer.
5、 Therefore, only those products that have been fabricated, assembled, and tested on the certified/qualified lines herein can be supplied as qualified products.The parts listing indicates the certification/approval status for each manufacturer. This can be found in the “Certification Status“ column w
6、hich accompanies each part listing. There are four possible certification/approval options. The following list identifies each certification/approval option and the abbreviation used in this listing:C - Certification to the Quality Management Program outlined in Appendix CTC - Transitional Certifica
7、tion to the Quality Management Program outlined in Appendix CD - Certification to the Quality Program of Appendix DDMS - Approval to the Diminishing Manufacturing Sources (DMS) provisions in MIL-PRF-19500In addition to the options for certification there are two levels of certification; JAN, JANTX,
8、JANTXV certification and JANS certification. The transitional certification to Appendix C option is for manufacturers in the process of making the transition from their previously certified Appendix D certification to an Appendix C certification. Manufacturers not able to comply with the certificati
9、on requirements of either appendix C or D may be granted a DMS approval. DMS approvals are intended to provide a qualified source of supply for difficult procurement situations. Please refer to the latest revision of MIL-PRF-19500 for details.MIL-PRF-19500 Appendix C contains provisions for test opt
10、imization for all listed processes and products for all device classes. Under these provisions traditional screens and Conformance Inspections (CI) can be optimized if found to be non-value added through the manufacturers up front controls and monitors in the wafer fabrication, assembly, and test ar
11、eas as well as by design. Optimization of these screens and inspections in no way adversely affects the devices military form, fit, and function. Regardless of screening or CI testing optimization, the manufacturer is still responsible for supplying products capable of passing any screening or CI te
12、sts prescribed in MIL-PRF-19500 and in the performance specification sheet.1. The Government designation includes the JAN prefix:* - Includes JAN and JANTX quality levels* - Includes JAN, JANTX and JANTXV quality levelsS - Includes JANS quality level only1 of 986Source: QPD at https:/assist.daps.dla
13、.mil - QPL Date: 2013-08-09If past the certification date, contact Qualifying Activity for status.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-V - Includes JANTXV quality level only+ - Includes JANTX quality level only+ - Includes JANTX and JANTXV
14、 quality levels onlyJANHC - Includes JANHC quality level onlyJANKC - Includes JANKC quality level only2. Radiation Hardness Assurance (RHA) levels:M - Total ionizing dose 3*10 3 (RAD(Si) Neutron fluence 2*10 12 (N/cm 2 ) (Unless otherwise specified)D - Total ionizing dose 1*10 4 (RAD(Si) Neutron flu
15、ence 2*10 12 (N/cm 2 ) (Unless otherwise specified)P - Total ionizing dose 3*10 4 (RAD(Si) Neutron fluence 2*10 12 (N/cm 2) (Unless otherwise specified)L - Total ionizing dose 5*10 4 (RAD(Si) Neutron fluence 2*10 12 (N/cm 2 ) (Unless otherwise specified)R - Total ionizing dose 1*10 5 (RAD(Si) Neutro
16、n fluence 2*10 12 (N/cm 2 ) (Unless otherwise specified)F - Total ionizing dose 3*10 5 (RAD(Si) Neutron fluence 2*10 12 (N/cm 2 ) (Unless otherwise specified)G - Total ionizing dose 5*10 5 (RAD(Si) Neutron fluence 2*10 12 (N/cm 2 ) (Unless otherwise specified)H - Total ionizing dose 1*10 6 (RAD(Si)
17、Neutron fluence 2*10 12 (N/cm 2 ) (Unless otherwise specified)Note: Government type designation will include product assurance level “V“ or “S“ followed by RHA level. The RHA level listed is the maximum level achieved during qualification testing. Manufacturer may supply any RHA level less than or e
18、qual to that listed.)3. Electrostatic Discharge (ESD) Sensitivity Classifications:Class 0: Less than 250VClass 1A: 250V - 499VClass 1B: 500V - 999VClass 1C: 1,000V - 1,999VClass 1: 0V - 1,999VClass 2: 2,000V - 3,999VClass 3A: 4,000V - 7,999VClass 3B: 8,000V - 15,999VClass 3: 4,000V - 15,999VNon-sens
19、itive: Above 15,999V4. These notes will apear next to the part number when applicable:1/ Manufacturer has issued an end of life buy notice for these device types. Contact manufacturer for further information.3/ Traceable die bank being utilized.4/ These device types have been declared “Inactive for
20、New Design“. Refer to the applicable notice for the date of inactivation. The listings for these device types will be maintained until acquisition of the product is no longer required.5/ Manufacturer is no longer undergoing periodic surveillance by the Qualifying Activity at this time.2 of 986Source
21、: QPD at https:/assist.daps.dla.mil - QPL Date: 2013-08-09If past the certification date, contact Qualifying Activity for status.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-GOVERNMENT DESIGNATION MANUFACTURER DESIGNATION TEST REFERENCE CAGE CODES
22、upplier TypeCertified StatusStop ShipJANHCA1N5538D 19500-1761-06 43611 M Green Until: 09-AUG-15NJANHCA1N5539B 19500-1761-06 43611 M Green Until: 09-AUG-15NJANHCA1N5539C 19500-1761-06 43611 M Green Until: 09-AUG-15NJANHCA1N5539D 19500-1761-06 43611 M Green Until: 09-AUG-15NJANHCA1N5540B 19500-1761-06
23、 43611 M Green Until: 09-AUG-15NJANHCA1N5540C 19500-1761-06 43611 M Green Until: 09-AUG-15NJANHCA1N5540D 19500-1761-06 43611 M Green Until: 09-AUG-15NJANHCA1N5541B 19500-1761-06 43611 M Green Until: 09-AUG-15NJANHCA1N5541C 19500-1761-06 43611 M Green Until: 09-AUG-15NJANHCA1N5541D 19500-1761-06 4361
24、1 M Green Until: 09-AUG-15NJANHCA1N5542B 19500-1761-06 43611 M Green Until: 09-AUG-15NJANHCA1N5542C 19500-1761-06 43611 M Green Until: 09-AUG-15NJANHCA1N5542D 19500-1761-06 43611 M Green Until: 09-AUG-15NJANHCA1N5543B 19500-1761-06 43611 M Green Until: 09-AUG-15NJANHCA1N5543C 19500-1761-06 43611 M G
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- DLAQML19500QPD2013SEMICONDUCTORDEVICESGENERALSPECIFICATIONFORPDF

链接地址:http://www.mydoc123.com/p-697951.html