DLA MS75131-1982 DESIGN FEATURES FOR SWITCHBOARD CORD ASSEMBLIES《交换台塞绳组装的结构特点》.pdf

《DLA MS75131-1982 DESIGN FEATURES FOR SWITCHBOARD CORD ASSEMBLIES《交换台塞绳组装的结构特点》.pdf》由会员分享，可在线阅读，更多相关《DLA MS75131-1982 DESIGN FEATURES FOR SWITCHBOARD CORD ASSEMBLIES《交换台塞绳组装的结构特点》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 In e 3-33-37 MS75333 57 9 7777732 0002377 T = - FED. SUP CLASS 5995 ADDITIONAL REQUIREMENTS FOR SWITCHBOARD CORD ASSEMBLIES .3ga SILICON BUMPER TO SLIDE ON CABLE TO PLUG Twist-and Pull Test. from the connector and twisted lg0 degrees in a clockwise direction, released, and twisted 180 degrees in a

2、counterclockwise direction and released. Following the twist test, the cable shall be gripped approximately 6 inches$.rom the connector in such a manner as not to damage the cable. A 20 pound weight shall be applied gradually to the connector and held for 30 seconds. Following the test, the cable as

3、sembly shall meet the requirements of (a) D.C. resistance, (b) D.W.V., (c) insulation resistance in accordance.with MIL-C-3885. With the.connector held stationary, the cable shall be gripped 2 to 3 inches . C SILICON RUBBER CUSHIQN AND TESTS FOR TWIST AND PULL ARE DESIGN FEATURES TO BE REQUIRED FOR

4、ALL SWITCHBOARD CORD ASSEMBLIES. ! -. . . -. DESJGN FEATURES P.A. I MILITARY STANDARD .- - MS 75131 Other Cst. OR SWSTCMBOARD CORD . . p.iG1+* . . ASSEMBLIES Procuremini Speclficqtion SUPERSEDES: , * / V E: i Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-