DLA MS51996 REV A (1)-2002 HOLE-PREPARATION-RING LOCKED INSERTS AND STUDS HIGH STRENGTH STANDARD DIMENSIONS FOR《标准尺寸高强度环形锁定嵌块及柱头螺栓打孔》.pdf

《DLA MS51996 REV A (1)-2002 HOLE-PREPARATION-RING LOCKED INSERTS AND STUDS HIGH STRENGTH STANDARD DIMENSIONS FOR《标准尺寸高强度环形锁定嵌块及柱头螺栓打孔》.pdf》由会员分享，可在线阅读，更多相关《DLA MS51996 REV A (1)-2002 HOLE-PREPARATION-RING LOCKED INSERTS AND STUDS HIGH STRENGTH STANDARD DIMENSIONS FOR《标准尺寸高强度环形锁定嵌块及柱头螺栓打孔》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 MS51996A AMENDMENT 1 24 OCTOBER 2002 MILITARY SPECIFICATION HOLE-PREPARATION-RING LOCKED INSERTS AND STUDS, HIGH STRENGTH, STANDARD DIMENSIONS FOR This amendment forms a part of MS51996A, dated 11 MARCH 1985, and is approved for use by all Departments and Agencies of the Department of Defense. PAGE

2、 1 Column Headings Stud Dash Number and Min Full Thread Depth Stud: Delete “MS51992” and substitute “SAE AS51992”. Custodians: Preparing Activity: Army - AR DLA-IS Navy - AS Air Force - 99 (Project 53GP-0318) AMSC N/A FSC 53GP DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-