DLA MS51813 REV E-1987 ELBOW PIPE TO TUBE 90 DEGREE FEMALE PIPE END FLARELESS TYPE HYDRAULIC [Refer To SAE J514 SAE J514 SAE J514 SAE J514 SAE J514]《非扩口液压管 承头90度弯管》.pdf

《DLA MS51813 REV E-1987 ELBOW PIPE TO TUBE 90 DEGREE FEMALE PIPE END FLARELESS TYPE HYDRAULIC [Refer To SAE J514 SAE J514 SAE J514 SAE J514 SAE J514]《非扩口液压管 承头90度弯管》.pdf》由会员分享，可在线阅读，更多相关《DLA MS51813 REV E-1987 ELBOW PIPE TO TUBE 90 DEGREE FEMALE PIPE END FLARELESS TYPE HYDRAULIC [Refer To SAE J514 SAE J514 SAE J514 SAE J514 SAE J514]《非扩口液压管 承头90度弯管》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、- MS5313 REV E 47 9999932 001L008 2 1 FEO. SUP-CLASS I 4730 I LU. -I / /- I I I SLEEVE-MC51825 I TABLE I A B D M1 y1 DASH NUMBER , I :y: I PIPE THREAD I STRAIGHT THREAD 1 DIA I I N1 1 NOM NPTF CLASS 26 DRILL 2.03 I ?.O3 I .O20 1/8 I 5/16-24UNF I 0.093 I 0.83 I 0.66 I 0.562 ASSY *BODY 1 21 2 22 3 23

2、4 24 5 25 6 26 7 27 8 28 9 29 10 30 - - 0.66 O. 562 3/8 -24UNF 0.125 0.83 1/4 1/8 7/16-20UNF 0.203 0.89 1/2 -2OUNF 0.234 0.95 3/8 1/4 9/16-18UNF 0.281 1.05 3/4 -16UNF 0.422 1.23 7/8 -14UNF 0.500 1.42 3/4 3/4 1-1/16-12UN 0.656 1.58 7/P 3/4 1-3/16-12UX 0.718 1.62 1 1 1-5/16-12UN 0.875 1.73 3/16 1/8 5/

3、16 1/8 1/2 3/8 5/8 1/2 - 0.66 O. 562 0.66 O. 562 0.88 0.750 1.02 0.875 1.23 1.062 1.36 1.312 1.42 1.312 1.62 1.625 1.875 1-1/4 1-1/4 1-5/8 -12UN 1.093 2.08 i-l/Z i-l/Z 1-7/8 -12UN 1.344 2.58 1.70 2.08 2.562 I I I I I 13 33 2 2 2-1/2 -12N I 1.813 2.64 2.39 I 2.812 FOR NOTES SEE SHEET 2. 0 Denotes cha

4、nge - TITLE MILITARI ST AN DARD HYDRAULIC M 551 8 13 FEMALE PIPE END, FLAHELESC TYPE, A. AR sther Curt 99 ELBOW, PIPE TO TUBE,90*, SHEET 1 OF 2 C“X6 in part ROCUREUENT SPECIFICATION SUPERSEDES MIL-F-18866 DD ,:, 672-1 (Coordinated) Provided by IHSNot for ResaleNo reproduction or networking permitted

5、 without license from IHS-,-,-fED. SUP.CLAS$ NOTES : 1. 2. 3, 4. s 5. 6. I. 8. * 9. 10. MATERIAL: Steel, carbon in accordance with the procurement specification. Steel, corrosion-resisting in accordance with the procurement specification. PROTECTIVE COATING: Cadmium plated in accordance with procure

6、ment specification. Zinc lated in accordance with procurement specification. PhospRate coating in accordance with procurement specification. Passivation treatment in accordance with procurement specification, DIMENSIONS AND TOLERANCES: Dimensions and tolerances not shown shall be in accordance with

7、the SAE Standard for Flareless Tube Fittings (SAE 5514). THREADS: Threads shall be in accordance with Screw-Thread Standards for Federal Services, FED-STD-HZ8. PART NUMBER: The MS part number consists of the MS number, plus the dash number and (for complete assembly) the applicable MS51825 sleeve st

8、yle designator. A. For complete assembly (with nut and sleeve), cadmium plated, use the MS number, plus the assembly dash number and the sleeve style designator. Example: MS51813-1A or HS51813-1B. For the body only, cadmium plated, use the MS number and the body dash number. Example: MS51813-21. For

9、 zinc coating add “Z“ and (for complete assembly) the sleeve style designator to the dash number. Example: MS51813-1ZA or MS51813-1ZB or MS518 13-212. For phosphate coating add “Pit and (for complete assembly) the sleeve style designator to the dash number. Example: MS51813-1PA or MC51813-1PB or MS5

10、1813-21P. For corrosion-resisting steel add. “SS“ and (for complete assembly), the sleeve style designator to the dash number. Example: MS51813-1SSA or MS51813-1SSB or MS51813-21SS. B. C. D. E. For design feature purposes, this standard takes precedence over procurement documents refer- enced herein

11、. Reference documents shall be of the issue in effect on date of invitations for bid. The illustration is for identification and is not intended to restrict designs or shapes not dimensioned. After 22 NOV 1974 for maintenance. CRUTIONi tended to imply interchangeability. , bodies will be used for ro

12、duction only and SHALL NOT be stocked Existing stock of bodies should e used until depleted. The following data is furnished for the purpose of new design only and ia not in- MS51813 will replace MS39200 for new design after approval date on this document. type elbows. Table II below 3 gives referen

13、ce data for coordination of equivalent tube sizes, in both compression and hydraulic Assembly replacement is authorized. TABLE II (FOR INFORMATION ONLY) ASSEMBLY EQUIVALENCY 1 I PART NUMBER PART NUMBER PART NUMBER COMPRESSION I HYDRAULIC I COMPRESSION 1 HYDRAULIC I COMPRESSION I HYDRAULIC 539200-1 I

14、 MS51813-1 I MS39200-5 I MS51813-5 I MS39200-9 I MS51813-9 : I -4 I -6 -7 -8 1: I -8 -10 -12 -11 I -10 -11 -12 A. AR TITLE MILITARY STANDARD FEMALE PIPE END, FLARELESS TYPE, HYDRAULIC iricuit 99 ELBOW, PIPE TO TUBE, SO, M 5 5 18 I 3 1 SHEET 2 f 2 CNM6 in part OCUREYENT SPECIFICATION WPERSEDES: 3 I:, 672-1 (Coordinated) mntvioun aoirtom OP win POW AMI omnoLmrt. 4730-0079 MIL-F-18866 O a Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-