DLA MIL-W-3970 10 D-2013 WAVEGUIDE ASSEMBLIES RIGID 90-DEGREE E-PLANE MITERED CORNER.pdf

《DLA MIL-W-3970 10 D-2013 WAVEGUIDE ASSEMBLIES RIGID 90-DEGREE E-PLANE MITERED CORNER.pdf》由会员分享，可在线阅读，更多相关《DLA MIL-W-3970 10 D-2013 WAVEGUIDE ASSEMBLIES RIGID 90-DEGREE E-PLANE MITERED CORNER.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、AMSC N/A FSC 5985 MIL-W-3970/10D 3 December 2013 SUPERSEDING MIL-W-3970/10C 3 February 2009 DETAIL SPECIFICATION SHEET WAVEGUIDE ASSEMBLIES, RIGID, 90-DEGREE E-PLANE MITERED CORNER This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements f

2、or acquiring the waveguide assemblies described herein shall consist of this document and the latest issue of MIL-DTL-3970. FIGURE 1. Assembly configuration. INCH-POUND Inactive for new design after 18 September 1998. Provided by IHSNot for ResaleNo reproduction or networking permitted without licen

3、se from IHS-,-,-TABLE I. Dash numbers, electrical, physical characteristics and dimensions. See footnotes at end of table I. Dash No. Wave- guide M85/ Flange Frequency Range TE10mode GHz Insertion loss max db VSWR max Pressuri- zation Ibf/in2 gage Dimensions 1/ 2/ 3/ 1 2 A B C Pin dia D E F G M3922/

4、 001 1-043 56-001 61-002 2.60-3.95 .05 1.07 15 3.405 (86.49) 0.020 (0.51) 2.280 (57.91) 0.015 (.38) 0.348 (8.84) 0.005 (0.13) 0.349 (8.86) 0.002 (0.05) 2.651 (67.34) 0.020 (0.51) .053 (1.35) .012 (.30) 002 1-055 57-002 62-002 3.95-5.85 .05 1.09 30 2.426 (61.62) 0.015 (0.38) 1.700 (43.18) 0.015 (0.38

5、) 0.226 (5.74) 0.005 (0.13) 0.227 (5.77) 0.002 (0.05) 1.734 (44.04) 0.015 (0.38) .037 (.94) .008 (.20) 003 1-067 55-001 60-001 5.85-8.20 .05 1.10 30 1.900 (48.26) 0.015 (0.38) 1.390 (35.31) 0.010 (0.25) 0.162 (4.11) 0.004 (0.10) 0.163 (4.14) 0.002 (0.05) 1.251 (31.78) 0.010 (0.25) .030 (.76) .006 (.

6、15) 004 1-073 53-002 59-007 7.05-10.0 .06 1.05 30 1.352 (34.34) +0.010 (0.25) 0.950 (24.13) 0.010 (0.25) 0.129 (3.28) 0.004 (0.10) 0.130 (3.30) 0.001 (0.03) 1.010 (25.65) 0.010 (0.25) .020 (.51) .005 (.13) 005 1-079 53-001 59-006 8.20-12.40 .06 1.10 30 1.113 (28.27) 0.010 (0.25) 0.820 (20.83) 0.010

7、(0.25) 0.104 (2.64) 0.003 (0.08) 0.0100 (2.54) 0.001 (0.03) 0.768 (19.51) 0.010 (0.25) .017 (.43) .004 (.10) 006 1-102 54-001 59-003 18.0-26.50 .11 1.07 30 0.790 (20.07) 0.010 (0.25) 0.650 (16.51) 0.010 (0.25) 0.044 (1.12) 0.002 (0.05) 0.0445 (1.13) 0.0005 (0.01) 0.375 (9.53) 0.010 (0.25) .011 (.28)

8、 .002 (.05) 007 1-106 54-001 59-003 18.0-26.50 .11 1.16 30 0.790 (20.07) 0.010 (0.25) 0.650 (16.51) 0.010 (0.25) 0.044 (1.12) 0.002 (0.05) 0.0445 (1.13) 0.0005 (0.01) 0.375 (9.53) 0.010 (0.25) .011 (.28) .002 (.05) 008 1-077 53- 001 59-008 8.20-12.40 .06 1.10 30 1.113 (28.27) 0.010 (0.25) 0.820 (20.

9、83) 0.010 (0.25) 0.104 (2.64) 0.003 (0.08) 0.100 (2.54) 0.001 0.03 0.768 (19.58) 0.010 (0.25) .017 (.43) .004 (.10) 2MIL-W-3970/10DProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TABLE I. Dash numbers, electrical, physical characteristics and dimensi

10、ons Continued. 1/ Dimensions are in inches. 2/ Metric equivalents (to the nearest .01 mm) are given for general information only and are based upon 1 inch = 25.4 mm. 3/ Metric equivalents are in parentheses. Dash No. Wave- guide M85/ Flange Frequency Range TE10mode GHz Insertion loss max db VSWR max

11、 Pressurei-zation Ibf/in2 gage Dimensions 1/ 2/ 3/ 1 2 A B C Pin dia D E F G M3922/ 009 1-071 53-004 59-009 7.05-10.0 .06 1.05 30 1.352 (34.34) 0.010 (0.25) 0.950 (24.13) 0.010 (0.25) 0.129 (3.28) 0.004 (0.10) 0.130 (3.30) 0.001 (0.03) 1.010 (25.65) 0.010 (0.25) .020 (.51) .005 (.13) 010 1-041 56-00

12、2 61-001 2.60-3.95 .05 1.07 15 3.405 (86.49) 0.020 (0.51) 2.280 (57.91) 0.015 (0.38) 0.348 (8.84) 0.005 (0.13) 0.349 (8.86) 0.002 (0.05) 2.651 (67.34) 0.020 (0.51) .053 (1.35) .012 (.30) 011 1-089 53-005 59-001 12.4-18.0 .07 1.10 30 0.893 (22.68) 0.010 (0.25) 0.730 (18.54) 0.010 (0.25) 0.080. (2.03)

13、 0.003 (0.08) 0.081 (2.06) 0.001 (0.03) 0.507 (12.88) 0.010 (0.25) .014 (.36) .003 (.08) 012 1-053 57-001 62-001 3.95-5.85 .05 1.09 30 2.426 (61.62) 0.015 (0.38) 1.700 (43.18) 0.015 (0.38) 0.226 (5.74) 0.005 (0.25) 0.227 (5.77) 0.002 (0.05) 1.734 (44.04) 0.015 (0.38) .037 (.94) .008 (.20) 013 3-006

14、54-003 59-005 26.5-40.0 .15 1.16 30 0.644 (16.36) 0.010 (0.25) 0.540 (13.72) 0.010 (0.25) 0.036 (0.91) 0.002 (0.05) 0.0365 (0.93) 0.0005 (0.01) 0.303 (7.70) 0.010 (0.25) .009 (.23) .001 (.08) 014 1-065 55-002 60-002 5.85-8.20 .05 1.10 30 1.900 (48.26) 0.015 (0.38) 1.390 (35.31) 0.010 (0.25) 0.162 (4

15、.11) 0.004 (0.10) 0.163 (4.14) 0.002 (0.05) 1.251 (31.78) 0.010 (0.25) .030 (.76) .006 (.15) 015 1-093 53-005 59-001 12.4-18.0 .07 1.10 30 0.893 (22.68) 0.010 (0.25) 0.730 (18.54) 0.010 (0.25) 0.080 (2.03) 0.003 (0.08) 0.081 (2.06) 0.001 (0.03) 0.507 (12.88) 0.010 (0.25) .014 (.36) .003 (.08) 016 1-

16、103 54-002 59-004 18.0-26.5 .11 1.07 30 0.790 (20.07) 0.010 (0.25) 0.650 (16.51) +0.010 (0.25) 0.044 (1.12) 0.002 (0.05) 0.0445 (1.13) 0.0005 (0.01) 0.375 (9.53) 0.010 (0.25) .011 (.28) .002 (.05) 3MIL-DTL-3970/10CDRAFTMIL-W-3970/10DProvided by IHSNot for ResaleNo reproduction or networking permitte

17、d without license from IHS-,-,-MIL-W-3970/10D 4 REQUIREMENTS: Dimensions and configuration: See table I and figure 1. Electrical characteristics: See table I. Part number: M3970/10- (dash number from table I). Cross reference: See table II. TABLE II Cross reference. Part number M3970/10- Type design

18、ation Part number M3970/10- Type designation 001 UG-893/U 009 UG-901/U 002 UG-894/U 010 UG-902/U 003 UG-895/U 011 UG-903/U 004 UG-896/U 012 UG-904/U 005 UG-897/U 013 UG-905/U 006 UG-898/U 014 UG-906/U 007 UG-899/U 015 UG-907/U 008 UG-900/U 016 UG-908/U Referenced documents. This specification sheet

19、only references MIL-DTL-3970. Marginal notations are not used on this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodians: Preparing activity: Army - CR DLA - CC Navy - EC Air Force - 85 (Project 5985-2014-006) DLA - CC Review activities Army

20、AR, MI Navy - AS, CG, MC, OS Air Force 19, 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-