DLA MIL-S-11713C (1)-2002 STEEL STRIP CARBON SPRING FOR MECHANICAL TIME FUZE COMPONENTS《钟表引信部分的弹簧碳钢条》.pdf

《DLA MIL-S-11713C (1)-2002 STEEL STRIP CARBON SPRING FOR MECHANICAL TIME FUZE COMPONENTS《钟表引信部分的弹簧碳钢条》.pdf》由会员分享，可在线阅读，更多相关《DLA MIL-S-11713C (1)-2002 STEEL STRIP CARBON SPRING FOR MECHANICAL TIME FUZE COMPONENTS《钟表引信部分的弹簧碳钢条》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、1 of 2 AMSC N/A FSC 9515 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. MIL-S-11713C AMENDMENT 1 26 JUNE 2002 MILITARY SPECIFICATION STEEL STRIP, CARBON, SPRING: FOR MECHANICAL TIME FUZE COMPONENTS This amendment forms apart of MIL-S-11713C, dated 25 April 1983, an

2、d is approved for use by all Departments and Agencies of the Department of Defense. PAGE I 2.1 and 2.1.1: Delete. PAGE 2 2.2: Delete and Substitute: “2.2 Non-Government publications. The following document(s) form a part of this document to the extent specified herein. Unless otherwise specified, th

3、e issues of the documents which are DoD adopted are those listed in the issue of the DoDISS cited in the solicitation. Unless otherwise specified, the issues of documents not listed in the DoDISS are the issues of the documents cited in the solicitation (see 6.2). AMERICAN SOCIETY FOR TESTING AND MA

4、TERIALS ASTM E18 - Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials ASTM E290 - Standard Test Methods for Bend Testing of Material for Ductility ASTM E1282 - Standard Guide for Specifying the Chemical Compositions and Selecting Sampling Practices an

5、d Quantitative Analysis methods for Metals, Ores, and Related Materials (Application for copies of ASTM publications should be addressed to the American Society of Testing and Material, 100 Barr Harbor Dr., West Conshohocken, PA 19428.) SAE INTERNATIONAL (SAE) AMS-STD-66 - Steel: Chemical Compositio

6、n and hardenability AMS-STD- 185 - Identification Marking of Copper and Copper Base Alloy Mill Products (Application for copies should be addressed to the SAE International, 400 Commonwealth Drive, Warrendale, PA 15096.)” PAGE 3 3.2.1: Delete “Fed. Std. No. 66” and substitute “AMS-STD-66”. PAGE 4 3.

7、9: Delete “Fed. Std. No. 183” and substitute “AMS-STD - 183”. INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-S-11713C AMENDMENT 1 2 PAGE 5 4.3.1: Delete “method 111 or 112 of Fed. Test Method Std. No. 151” and substitute “ASTM E1282”.

8、 PAGE 6 4.5.1.1: Delete “method 111 or 112 of Fed. Test Method Std. No. 151, as applicable” and substitute “ASTM E1282”. 4.5.2.1: Delete “method 111 or 112 of Fed. Test Method Std. No. 151. Referee analysis shall be by method 111” and substitute “ASTM E1282”. 4.6.3: Delete. PAGE 7 5: Delete Section

9、5 entirely and substitute: “5. PACKAGING 5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the contract or order (see 6.2). When actual packaging of materiel is to be performed by DoD personnel, these personnel need to contact the responsible packaging acti

10、vity to ascertain requisite packaging requirements. Packaging requirements are maintained by the Inventory Control Points packaging activity within the Military Department or Defense Agency, or within the Military Departments System Command. Packaging data retrieval is available from the managing Mi

11、litary Departments or Defense Agencys automated packaging tiles, CD-ROM products, or by contacting the responsible packaging activity.” 6.2(i) and 6.2(j): Delete. Custodians: Preparing activity: Army - MR DLA - IS Navy - OS (Project 9515-1158) Review activities: Army AR, MI Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-