DLA MIL-DTL-43994 D-2008 MARKER IDENTIFICATION FIRE CHEMICAL HAZARD AND RESTRICTED AREA REFLECTIVE《防火 化学危险品和禁区反射标志》.pdf
《DLA MIL-DTL-43994 D-2008 MARKER IDENTIFICATION FIRE CHEMICAL HAZARD AND RESTRICTED AREA REFLECTIVE《防火 化学危险品和禁区反射标志》.pdf》由会员分享,可在线阅读,更多相关《DLA MIL-DTL-43994 D-2008 MARKER IDENTIFICATION FIRE CHEMICAL HAZARD AND RESTRICTED AREA REFLECTIVE《防火 化学危险品和禁区反射标志》.pdf(12页珍藏版)》请在麦多课文档分享上搜索。
1、 INCH-POUND MIL-DTL-43994D 15 APRIL 2008 SUPERSEDING MIL-M-43994C 2 January 1991 DETAIL SPECIFICATION MARKER, IDENTIFICATION, FIRE, CHEMICAL HAZARD, AND RESTRICTED AREA, REFLECTIVE This specification is approved for use by all Departments and Agencies of the Department of Defense. 1. Scope 1.1 Scope
2、. This specification covers markers processed on pressure-sensitive adhesive backed retroreflective sheeting. 1.2 Classification. The markers will be of the following types, marker numbers, sizes, and classes as specified (see 6.2): Type I - Fire Hazard Marker 1 - Hazard class 1.1 Marker 2 - Hazard
3、class 1.2 Marker 3 - Hazard class 1.3 Marker 4 - Hazard class 1.4 Size - 24 inch Size - 12 inch Type II - Chemical Hazard Marker 5 - Wear full protective clothing Class 1 - Red Class 2 - Yellow Class 3 - White Comments, suggestions, or questions on this document should be addressed to Defense Supply
4、 Center Philadelphia, ATTN: DSCP-NASA, 700 Robbins Avenue, Philadelphia, PA 19111-5096 or email to dscpg incorrect; illegible; of improper size, location, sequence, or method of application Materials Any component missing, damaged, or not as specified Workmanship Inadequate application of components
5、, such as: incomplete sealing or closure of flap. improper taping, loose strapping or inadequate stapling Bulged or distorted container Content Weight of contents per container exceeds specified limits 5. PACKAGING 5.1 Packaging. For acquisition purposes, the packaging requirements shall be as speci
6、fied in the contract or order (see 6.2). When packaging of material is to be performed by DoD or inhouse contractor personnel, these personnel need to contact the responsible packaging activity to ascertain packaging requirements. Packaging requirements are maintained by the Inventory Control Points
7、 packaging activities within the Military Services or Defense Agency, or within the military services system commands. Packaging data retrieval is available from the managing Military Departments or Defense Agencys automated packaging files, CD-ROM products, or by contacting the responsible packagin
8、g activity. 6. NOTES (This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.) 6.1 Intended use. Type I markers are intended to convey fire fighting personnel the kind of hazard presented by fires involving various types of ammunition and explo
9、sives in storage. Type II markers identify the type of chemical agent in storage and the type of precautions to be taken in fighting fires involving specific chemical agents (see 6.4). Type III markers (decals) are intended for use as a means of warning individuals as to the restrictions of the area
10、 they are entering. 6.2 Acquisition requirements. Acquisition documents must specify the following: a. Title, number, and date of this specification. b. Type, marker number, class, and size (see 1.2). c. When a first article is required (see 3.1, 4.2 and 6.3). d. Packaging requirements. Provided by
11、IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-43994D 76.3 First article. When a first article is required, it shall be inspected and approved under the appropriate provisions of FAR 52.209. The first article should be a preproduction sample. The contra
12、cting officer should specify the appropriate type of first article and the number of units to be furnished. The contracting officer should also include specific instructions in acquisition documents regarding arrangements for selection, inspection, and approval of the first article. 6.4 User informa
13、tion. When markers 8, 10, 11 or 12 are used, marker 5, class 1 (red) must also be used. When marker 9 is used, marker 5, class 2 (yellow) must also be used. When marker 7 is used, marker 6 must also be used. 6.5 Shelf-life. This specification covers items where the assignment of a Federal shelf-life
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- DLAMILDTL43994D2008MARKERIDENTIFICATIONFIRECHEMICALHAZARDANDRESTRICTEDAREAREFLECTIVE 防火 化学 危险品 禁区 反射

链接地址:http://www.mydoc123.com/p-690792.html