DLA MIL-DTL-38999 46 B-2008 CONNECTORS ELECTRICAL CIRCULAR PLUG BREECH COUPLING EMI GROUNDING REMOVABLE CRIMP CONTACTS SERIES IV METRIC《IV系列 可移动压接触电EMI接地 闩锁接合圆形插头电气连接器》.pdf

《DLA MIL-DTL-38999 46 B-2008 CONNECTORS ELECTRICAL CIRCULAR PLUG BREECH COUPLING EMI GROUNDING REMOVABLE CRIMP CONTACTS SERIES IV METRIC《IV系列 可移动压接触电EMI接地 闩锁接合圆形插头电气连接器》.pdf》由会员分享，可在线阅读，更多相关《DLA MIL-DTL-38999 46 B-2008 CONNECTORS ELECTRICAL CIRCULAR PLUG BREECH COUPLING EMI GROUNDING REMOVABLE CRIMP CONTACTS SERIES IV METRIC《IV系列 可移动压接触电EMI接地 闩锁接合圆形插头电气连接器》.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、METRIC MIL-DTL-38999/46B 30 July 2008 SUPERSEDING MIL-DTL-38999/46A 11 June 2001 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, CIRCULAR, PLUG, BREECH COUPLING, EMI GROUNDING, REMOVABLE CRIMP CONTACTS, SERIES IV, METRIC This specification is approved for use by all Departments and Agencies of th

2、e Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-38999. FIGURE 1. Plug, classes F, K, P, R, S, T, W, X and Z. AMSC N/A FSC 5935 Provided by IHSNot for ResaleNo reproduction or networking permitted without licen

3、se from IHS-,-,-MIL-DTL-38999/46B Z max Shell size Shell size code C min E dia. max S dia. max W max Mated Unmated 11 B 19.7 (.776) 26.6 (1.047) 13 C 22.9 (.902) 31.0 (1.220) 15 D 26.4 (1.039) 34.2 (1.346) 17 E 29.2 (1.150) 37.4 (1.472) 19 F 32.4 (1.276) 40.2 (1.583) 21 G 35.6 (1.402) 43.3 (1.705) 2

4、3 H 38.8 (1.528) 46.5 (1.831) 25 J 4.8 (.189) 41.9 (1.650) 49.7 (1.957) 27.0 (1.063)36.5 (1.437) 38.9 (1.531) NOTES: 1. Dimensions are in millimeters. 2. Inches equivalents are given for information only. FIGURE 1. Plug, classes F, K, P, R, S, T, W, X and Z - Continued. 2 Provided by IHSNot for Resa

5、leNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-38999/46B REQUIREMENTS: Dimensions and configurations: See figure 1. Interface dimensions shall conform to MIL-DTL-38999. This connector mates with: MIL-DTL-38999/40, /42 and /44. Main key color: Blue. For insert arrangem

6、ents: See MIL-STD-1560. Class K is not for Air Force use. Part or Identifying Number (PIN) example: D38999/46 F J 35 P N Specification sheet number Class Shell size code Insert arrangement Contact style Polarizing position: N is required for normal position Coupling rings of class F plugs shall have

7、 anodic finish in accordance with MIL-A-8625, type III, .025 millimeter minimum thickness. Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. 3 Provided by IHSNot for ResaleNo reproduc

8、tion or networking permitted without license from IHS-,-,-MIL-DTL-38999/46B Referenced documents. In addition to MIL-DTL-38999, this document references the following. MIL-DTL-38999/40 MIL-DTL-38999/42 MIL-DTL-38999/44 MIL-STD-1560 MIL-A-8625 CONCLUDING MATERIAL Custodians: Preparing activity: Army

9、CR DLA - CC Navy - AS Air Force 85 (Project 5935-2006-068) DLA - CC Review activities: Army - AR, MI Navy - EC, MC Air Force - 19, 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-