DLA MIL-DTL-38999 23 C-2008 CONNECTORS ELECTRICAL CIRCULAR THREADED RECEPTACLE JAM-NUT MOUNTING HERMETIC HERMETIC SOLDER CONTACTS SERIES III METRIC《III系列圆形螺纹型公制插座接头 以I气密性锁紧螺帽焊接方式连接.pdf

《DLA MIL-DTL-38999 23 C-2008 CONNECTORS ELECTRICAL CIRCULAR THREADED RECEPTACLE JAM-NUT MOUNTING HERMETIC HERMETIC SOLDER CONTACTS SERIES III METRIC《III系列圆形螺纹型公制插座接头 以I气密性锁紧螺帽焊接方式连接.pdf》由会员分享，可在线阅读，更多相关《DLA MIL-DTL-38999 23 C-2008 CONNECTORS ELECTRICAL CIRCULAR THREADED RECEPTACLE JAM-NUT MOUNTING HERMETIC HERMETIC SOLDER CONTACTS SERIES III METRIC《III系列圆形螺纹型公制插座接头 以I气密性锁紧螺帽焊接方式连接.pdf（6页珍藏版）》请在麦多课文档分享上搜索。

1、 METRIC MIL-DTL-38999/23C 10 July 2008 SUPERSEDING MIL-DTL-38999/23B 11 June 2001 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, RECEPTACLE, JAM-NUT MOUNTING, HERMETIC, HERMETIC SOLDER CONTACTS, SERIES III, METRIC This specification is approved for use by all Departments and

2、Agencies of the Department of Defense. The requirements for acquiring the connectors described herein shall consist of this specification sheet and MIL-DTL-38999. FIGURE 1. Receptacle, classes N and Y. AMSC N/A FSC 5935 Provided by IHSNot for ResaleNo reproduction or networking permitted without lic

3、ense from IHS-,-,-MIL-DTL-38999/23C Connector dimensions Shell size Shell size code A Dia .3 B Flat + .10 - .15 C Dia + .1 - .2 D + .13 - .03 E Dia .3 F Dia max G thread 9 A 30.2 (1.189) 16.53 (.651) 17.4 (.685)2.39 (.094)15.3 (.602)15.9 (.626) M17X1-6g 0.100R 11 B 34.9 (1.374) 19.07 (.751) 20.6 (.8

4、11)2.39 (.094)18.4 (.724)18.8 (.740) M20X1-6g 0.100R 13 C 38.1 (1.500) 23.82 (.938) 25.4 (1.000)2.39 (.094)21.6 (.850)23.8 (.937) M25X1-6g 0.100R 15 D 41.3 (1.626) 26.97 (1.062) 28.5 (1.122) 2.39 (.094)24.8 (.976)26.8 (1.055)M28X1-6g 0.100R 17 E 44.5 (1.752) 30.15 (1.187) See note 62.39 (.094)28.0 (

5、1.102)30.8 (1.213)M32X1-6g 0.100R (see note 2) 19 F 49.2 (1.937) 33.32 (1.312) See note 63.58 (.141)31.2 (1.228)33.8 (1.331)M35X1-6g 0.100R 21 G 52.4 (2.063) 36.50 (1.437) See note 63.58 (.141)34.3 (1.350)36.8 (1.449)M38X1-6g 0.100R 23 H 55.6 (2.189) 39.67 (1.562) 41.2 (1.622) 3.58 (.141)37.5 (1.476

6、)39.8 (1.567)M41X1-6g 0.100R 25 J 58.7 (2.311) 42.85 (1.687) 44.4 (1.748) 3.58 (.141)40.7 (1.602)42.8 (1.685)M44X1-6g 0.100R FIGURE 1. Receptacle, classes N and Y- Continued. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-38999/23C K max S

7、hell size Shell size code H .13 J + .0 - .71 With pin With socket L max 9 A 1.14 (.045) 1.5 (.059) 5.3 (.209) 5.9 (.232) 9.1 (.358) 11 B 1.14 (.045) 1.5 (.059) 5.3 (.209) 5.9 (.232) 9.1 (.358) 13 C 1.14 (.045) 1.5 (.059) 5.1 (.201) 5.7 (.224) 9.1 (.358) 15 D 1.14 (.045) 1.5 (.059) 5.1 (.201) 5.7 (.2

8、24) 9.1 (.358) 17 E 1.14 (.045) - 5.1 (.201) 5.7 (.224) 9.1 (.358) 19 F 1.91 (.075) - 5.1 (.201) 5.7 (.224) 9.7 (.382) 21 G 1.91 (.075) - 5.1 (.201) 5.7 (.224) 9.7 (.382) 23 H 1.91 (.075) 1.5 (.059) 5.1 (.201) 5.7 (.224) 9.7 (.382) 25 J 1.91 (.075) 1.5 (.059) 5.1 (.201) 5.7 (.224) 9.7 (.382) FIGURE

9、1. Receptacle, classes N and Y - Continued. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-38999/23C Shell size Shell Size code M Dia +.3, -.0 P +.4 -.1 S .4 W +.3 -.1 Z Max Recommended O-ring SAE-AS3578 (see note 5) 9 A 16.3 (.642) 14.1 (

10、.555) 27.0 (1.063)2.6 (.102) 29.2 (1.150)019 11 B 19.4 (.764) 14.1 (.555) 31.8 (1.252)2.6 (.102) 29.2 (1.150)022 13 C 22.7 (.894) 14.3 (.563) 34.9 (1.374)2.6 (.102) 29.3 (1.154)024 15 D 25.9 (1.020) 14.3 (.563) 38.1 (1.500)2.6 (.102) 29.3 (1.154)026 17 E 29.0 (1.142) 14.3 (.563) 41.3 (1.626)2.6 (.10

11、2) 29.3 (1.154)028 19 F 32.2 (1.268) 14.3 (.563) 46.0 (1.811)3.4 (.134) 30.1 (1.185)128 21 G 35.4 (1.394) 14.3 (.563) 49.2 (1.937)3.4 (.134) 30.1 (1.185)130 23 H 38.6 (1.520) 14.3 (.563) 52.4 (2.063)3.4 (.134) 30.1 (1.185)132 25 J 41.7 (1.642) 14.3 (.563) 55.6 (2.189)3.4 (.134) 30.1 (1.185)134 NOTES

12、: 1. Dimensions are in millimeters. 2. Modified major diameter: 31.95 - 31.80 mm. 3. Panel thickness: 3.2 - 1.58 mm. 4. Polarizing position N is shown. 5. Alternate “0-ring” material may be SAE-AMS3325. 6. C and J dimensions define feature required for proper fit in type E panel. 7. F diameter defin

13、es thread start. 8. This dimension applies to sizes 17, 19, and 21 only (C diameter and G diameter are the same). 9. Inch equivalents are given for general information only. FIGURE 1. Receptacle, classes N and Y - Continued. 4 Provided by IHSNot for ResaleNo reproduction or networking permitted with

14、out license from IHS-,-,-MIL-DTL-38999/23C REQUIREMENTS: Dimensions and configurations: See figure 1. Interface dimensions shall conform to MIL-DTL-38999. This connector mates with MIL-DTL-38999/26. O-ring shall be provided with jam-nut receptacles. For insert arrangements: See MIL-STD-1560. Connect

15、ors accessories: See SAE-AS85049. Part or Identifying Number (PIN) example: D38999/ 23 Y A 35 P NDoD no. prefix Specification sheet no. Class Shell size code Insert arrangement Contact style Polarizing position N is required for normal position Eyelet contact termination: See MIL-DTL-38999. Changes

16、from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Referenced documents. In addition to MIL-DTL-38999, this document references the following: MIL-DTL-38999/28 MIL-DTL-38999/26 MIL-STD-1560 SA

17、E-AS85049 SAE-AMS3325 SAE-AS3578 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-38999/23C CONCLUDING MATERIAL Custodians: Preparing activity: Army CR DLA - CC Navy - AS Air Force - 85 (Project 5935-2008-066) DLA - CC Review activities: Arm

18、y - AR, MI Navy - EC, MC, OS Air Force - 19, 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-