DLA MIL-DTL-38999 21 C-2008 CONNECTORS ELECTRICAL CIRCULAR THREADED RECEPTACLE BOX MOUNTING FLANGE HERMETIC HERMETIC SOLDER CONTACTS SERIES III METRIC《III系列圆形螺纹型公制插座接头 以气密性法兰焊接于盒体内.pdf

《DLA MIL-DTL-38999 21 C-2008 CONNECTORS ELECTRICAL CIRCULAR THREADED RECEPTACLE BOX MOUNTING FLANGE HERMETIC HERMETIC SOLDER CONTACTS SERIES III METRIC《III系列圆形螺纹型公制插座接头 以气密性法兰焊接于盒体内.pdf》由会员分享，可在线阅读，更多相关《DLA MIL-DTL-38999 21 C-2008 CONNECTORS ELECTRICAL CIRCULAR THREADED RECEPTACLE BOX MOUNTING FLANGE HERMETIC HERMETIC SOLDER CONTACTS SERIES III METRIC《III系列圆形螺纹型公制插座接头 以气密性法兰焊接于盒体内.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、METRIC MIL-DTL-38999/21C 10 July 2008 SUPERSEDING MIL-DTL-38999/21B 11 June 2001 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, RECEPTACLE, BOX MOUNTING FLANGE, HERMETIC, HERMETIC SOLDER CONTACTS, SERIES III, METRIC This specification is approved for use by all Departments an

2、d Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-38999. FIGURE 1. Receptacle, classes N and Y . AMSC N/A FSC 5935 Provided by IHSNot for ResaleNo reproduction or networking permitted without lic

3、ense from IHS-,-,-MIL-DTL-38999/21C 2 Connector dimensions Shell size Shell size code P .20 PP .20 R1 (see note 3) R2 (see note 4) S .3 V max 9 A 3.25 (.128) 5.49 (.216) 18.26 (.719) 15.09 (.594) 23.8 (.937) 21.4 (.843) 11 B 3.25 (.128) 4.93 (.194) 20.62 (.812) 18.26 (.719) 26.2 (1.031) 21.4 (.843)

4、13 C 3.25 (.128) 4.93 (.194) 23.01 (.906) 20.62 (.812) 28.6 (1.126) 21.4 (.843) 15 D 3.25 (.128) 4.39 (.173) 24.61 (.969) 23.01 (.906) 31.0 (1.220) 21.4 (.843) 17 E 3.25 (.128) 4.93 (.194) 26.97 (1.062) 24.61 (.969) 33.3 (1.311) 21.4 (.843) 19 F 3.25 (.128) 4.93 (.194) 29.36 (1.156) 26.97 (1.062) 36

5、.5 (1.437) 21.4 (.843) 21 G 3.25 (.128) 4.93 (.194) 31.75 (1.250) 29.36 (1.156) 39.7 (1.563) 21.4 (.843) 23 H 3.91 (.154) 6.15 (.242) 34.93 (1.375) 31.75 (1.250) 42.9 (1.689) 21.4 (.843) 25 J 3.91 (.154) 6.15 (.242) 38.10 (1.500) 34.93 (1.375) 46.0 (1.811) 21.4 (.843) NOTES: 1. Dimensions are in mil

6、limeters. 2. Polarizing position N is shown. 3. Front or rear panel mounting. 4. Front panel mounting only. 5. Inch equivalents are given for information only. FIGURE 1. Receptacle, classes N and Y - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from

7、 IHS-,-,-MIL-DTL-38999/21C 3 REQUIREMENTS: Dimensions and configurations: See figure 1. Interface dimensions shall conform to MIL-DTL-38999. This connector mates with MIL-DTL-38999/26. Insert arrangements: See MIL-STD-1560. Part or identifying Number (PIN) example: D38999/ 21 Y A 35 P NDoD no. prefi

8、x Specification sheet no. Class Shell size code Insert arrangement Contact style Polarizing position N is required for normal position Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-38999/21C 4 Changes from previous issue. Marginal notations

9、 are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Referenced documents. In addition to MIL-STD-38999, this document references the following: MIL-DTL-38999/26 MIL-STD-1560 CONCLUDING MATERIAL Custodians: Preparing activity: Army C

10、R DLA - CC Navy - AS Air Force - 85 (Project 5935-2008-019) DLA - CC Review activities: Army - AR, MI Navy - EC, MC, OS Air Force - 19, 99 DLA - IS NOTE: The activities listed above were interested in this document as of this document. Since organization and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-