DLA MIL-DTL-32439 D-2013 CLOTH DUCK TEXTURED NYLON [Cancelled DLA MIL-DTL-43734E ADMIN NOTICE 1 DLA MIL-DTL-43734E DLA MIL-C-43734D DLA MIL-C-43734C (1) DLA MIL-C-43734C DLA MIL-C-.pdf

《DLA MIL-DTL-32439 D-2013 CLOTH DUCK TEXTURED NYLON [Cancelled DLA MIL-DTL-43734E ADMIN NOTICE 1 DLA MIL-DTL-43734E DLA MIL-C-43734D DLA MIL-C-43734C (1) DLA MIL-C-43734C DLA MIL-C-.pdf》由会员分享，可在线阅读，更多相关《DLA MIL-DTL-32439 D-2013 CLOTH DUCK TEXTURED NYLON [Cancelled DLA MIL-DTL-43734E ADMIN NOTICE 1 DLA MIL-DTL-43734E DLA MIL-C-43734D DLA MIL-C-43734C (1) DLA MIL-C-43734C DLA MIL-C-.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、 INCH-POUND MIL-DTL-32439 19 February 2013 SUPERSEDING MIL-C-43734D 20 August 1987 DETAIL SPECIFICATION CLOTH, DUCK, TEXTURED NYLON This specification is approved for use by all Departments and Agencies of the Department of De-fense. 1. SCOPE 1.1 Scope. This specification covers the requirements for

2、 textured nylon duck cloth, dyed or printed with a camouflage pattern. 1.2 Classification. The cloth covers the following Types, Classes and Styles as specified (see 6.2): Type I - 1000 denier Class 1 - 9.5 oz/sq yd, Untreated Class 2 - 9.5 oz/sq yd, Water repellent Class 3 - 12.0 oz/sq yd, Water re

3、pellent/back coated Class 4 - 12.0 oz/sq yd, Water repellent/flame retardant Type II - 725 denier Class 1 - 7.5 oz/sq yd Untreated Class 2 - 7.5 oz/sq yd, Water repellent Class 3 - 10.0 oz/sq yd, Water repellent/back coated Comments, suggestions, or questions on this document should be addressed to

4、Attn: DLA Troop Support Standardization Team, 700 Robbins Avenue, Philadelphia, PA 19111-5096. Since contact information can change, you may want to verify the currency of the address information using Acquisition Streamlining and Standardization Information System (ASSIST) online database https:/as

5、sist.dla.mil AMSC NA FSC 8305 DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-32439 2 Type III - 500 denier Class 1 - 7.0 oz/sq yd Untreated Class 2 - 7.0 oz/sq

6、 yd, Water repellent Class 3 - 8.0 oz/sq yd, Water repellent/back coated Class 4 - 9.5 oz/sq yd, Water repellent/flame retardant Type IV - 330 denier Class 1 - 4.0 oz/sq yd Untreated Class 2 - 4.0 oz/sq yd, Water repellent Class 3 - 5.5 oz/sq yd, Water repellent/back coated Style A - Solid shade Sty

7、le B - Woodland Camouflage printed Style C - Desert Camouflage printed (3 Color) Style D - Universal Camouflage printed (UCP) Style E - Woodland Camouflage printed Marine Pattern (MARPAT) Style F - Desert Camouflage printed, Marine Pattern (MARPAT) Style G - Operation Enduring Freedom Camouflage Pat

8、tern (OCP) 2. APPLICABLE DOCUMENTS 2.1 General. The documents listed in this section are specified in sections 3, 4 or 5 of this specification. This section does not include documents cited in other sections of this specifica-tion, or recommended for additional information or as examples. While ever

9、y effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4 or 5 of this specification whether or not they are listed. 2.2 Government documents. 2.2.1 Specifications, standards, and ha

10、ndbooks. The following specifications, standards, and handbooks form a part of this specification to the extent specified herein. Unless otherwise spec-ified, the issues of these documents shall be those cited in the solicitation or contract (see 6.2). FEDERAL STANDARDS FED-STD-4 - Glossary of Fabri

11、c Imperfections COMMERCIAL ITEM DESCRIPTIONS A-A-59826 - Thread Nylon Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-32439 3 DEPARTMENT OF DEFENSE STANDARDS MIL-STD-1487 - Glossary of Cloth Coating Imperfections (Copies of these documents ar

12、e available online at https:/assist.dla.mil/quicksearch/ or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) 2.2.2 Other Government documents, drawings, and publications. The following other Gov-ernment documents, drawings, and publications

13、 form a part of this document to the extent speci-fied herein. Unless otherwise specified, the issues are those cited in the solicitation or contract. (See 6.2). DRAWINGS U.S. ARMY NATICK SOLDIER, RESEARCH, DEVELOPMENT, AND ENGINEERING CENTER 2-1-1516 - Woodland Camouflage Pattern 2-1-2240 - Desert

14、Camouflage Pattern (3 color) 2-1-2519 - Universal Camouflage Pattern 2-1-2519-1 - ARPAT Camouflage Pattern, Desert Sand 500 2-1-2519-2 - ARPAT Camouflage Pattern, Urban Gray 501 2-1-2519-3 - ARPAT Camouflage Pattern, Foliage Green 502 2-1-2525 - Woodland MARPAT Pattern 4 color (Coyote 476) 2-1-2526

15、- Woodland MARPAT Pattern 4 color (Green 474 with EGA symbol) 2-1-2527 - Woodland MARPAT Pattern 4 color (Black 477) 2-1-2528 - Woodland MARPAT Pattern 4 color (Kahki 475) 2-1-2529 - Desert MARPAT Pattern 4 color (Light Tan 479) 2-1-2530 - Desert MARPAT Pattern 4 color (Urban Tan 478) 2-1-2531 - Des

16、ert MARPAT Pattern 4 color (Light Coyote 481 with EGA symbol) 2-1-2532 - Desert MARPAT Pattern 4 color (Highland 480) (Copies of drawings are available from the U.S. Army Natick Research Development and Engi-neering Center, Natick Soldier Center, ATTN: -RDNS-WPC, Natick, MA 01760.) CODE OF FEDERAL R

17、EGULATIONS 27 CFR Part 21 - Formula for Denatured alcohol 40 CFR Parts (150 180) Protection of Environment (Copies of these documents are available on-line at http:/www.gpoaccess.gov/cfr/index.html or from U.S. Government Printing Office, Superintendent of Documents, Mail Stop, Washington, DC 20402-

18、9328). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-32439 4 ENVIRONMENTAL PROTECTION AGENCY EPA Pollutants/toxins subtopics Federal Insecticide, Fungicide and Rodenticide Act. (Copies are available online at http:/www.epa.gov/pesticides or

19、 from the Environmental Protection Agency, 1200 Pennsylvania Avenue, N.W., Washington, D.C. 20460.) FEDERAL TRADE COMMISION Rules and Regulations Under the Textile Fiber Products Identification Act (Copies are available online at http:/www.ftc.gov or from the Federal Trade Commission, 600 Pennsylvan

20、ia Avenue, N.W., Washington, DC 20580-0001.) 2.3 Non-Government publications. The following documents form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract (see 6.2). AMERICAN ASSOCIATION

21、 OF TEXTILE CHEMISTS AND COLORISTS (AATCC) AATCC Test Method 8 - Colorfastness to Crocking: AATCC Crockmeter Method AATCC Test Method 15 - Colorfastness to Perspiration AATCC Test Method 16 - Colorfastness to Light AATCC Test Method 20 - Fiber Analysis: Qualitative AATCC Test Method 22 - Water Repel

22、lency: Spray Test AATCC Test Method 61 - Colorfastness to Laundering, Accelerated AATCC Test Method 70 - Water Repellency: Tumble Jar Dynamic Absorption Test AATCC Test Method 81 - pH of the Water-Extract from Wet Processed Textiles AATCC Test Method 96 - Dimensional Changes in Commercial Laundering

23、 of Woven and Knitted Fabrics Except Wool AATCC Test Method 118 - Oil Repellency: Hydrocarbon Resistance Test AATCC Test Method 119 - Color Change Due to Flat Abrasion (Frosting): Screen Wire Method AATCC Test Method 127 - Water Resistance: Hydrostatic Pressure Test AATCC Test Method 135 - Dimension

24、al Changes of Fabrics after Home Laundering AATCC Test Method 169 - Weather Resistance of Textiles Xenon Lamp Exposure AATCC Evaluation Procedure 1 Gray Scale for Color Change AATCC Evaluation Procedure 2 Gray Scale for Staining AATCC Evaluation Procedure 8 AATCC 9-Step Chromatic Transference Scale

25、AATCC Evaluation Procedure 9 Visual Assessment of Color Difference of Textiles Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-32439 5 (Copies are available on line at http:/www.aatcc.org or from the American Association of Textile Chemists a

26、nd Colorists, P.O. Box 12215, Research Triangle Park, NC 27709-2215.) ASTM INTERNATIONAL ASTM D 276 - Standard Test Methods for Identification of Fibers in Textiles ASTM D 737 - Test Method for Air Permeability of Textile Fabrics ASTM D 747 - Standard Test Method for Apparent Bending Modulus of Plas

27、tics by Means of a Cantilever Beam ASTM D 751 - Standard Test Method for Coated Fabrics ASTM D 1424 - Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus ASTM D 1776 - Standard Practice for Conditioning and Testing Textiles ASTM D 1907 - Standard Test

28、Method for Linear Density of Yarn (Yarn Number) by the Skein Method ASTM D 2582 - Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting ASTM D 3775 - Standard Test Method for Warp (End) and Filling (Pick) Count of Woven Fabrics ASTM D 3776 - Standard Test Me

29、thods for Mass Per Unit Area (Weight) of Fabric ASTM D 3884 - Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method ASTM D 5034 - Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) ASTM D 6413 - Standard Test Method for F

30、lame Resistance of Textiles (Vertical Test) (Copies of documents are available online at http:/www.astm.org or from the ASTM INTERNATIONAL, 100 Barr Harbor Drive, P.O. Box 700C, West Conshohocken, PA 19428-2959.) OTHER PUBLICATIONS Repeat Insult Patch Test-Modified Draize Procedure- Principles and M

31、ethods of Toxicology, (fourth edition), 2001, A. Wallace Hayes (editor), pp 1057-1060. (Copies are available online at http:/www.taylorandfrancis.co.uk/ or from the Taylor and Francis Group, 325 Chestnut St., Philadelphia, PA 19106.) Sears Fabric Defect Replica Scales (Copies are available from Sear

32、s Roebuck and Co. “Fabric Defect Replica Kit” at SHGS Hong Kong Textile Testing Laboratory, 49/F, office Tower, Langham Place, 8 Argyle Street, Mongkok, Kowloon, Hong Kong.) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-32439 6 (Copies of d

33、ocuments required by contractors in connection with specific acquisition functions should be obtained from the contracting activity or as directed by the contracting activity.) 2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between the text of t

34、his document and the references cited herein (except for related specification sheets), the text of this document takes precedence. 3. REQUIREMENTS 3.1 First article. When specified (see 6.2), a sample shall be subjected to first article inspec-tion (see 6.3) in accordance with 4.2. 3.2 Standard sam

35、ple. The finished cloth shall match the standard sample for shade and ap-pearance, and shall, be equal to or better than the standard sample with respect to all characteris-tics for which the standard sample is referenced (see 6.4). 3.3 Recycled, recovered, or environmentally preferable materials. R

36、ecycled, recovered, or environmentally preferable materials should be used to the maximum extent possible, provided that the material meets or exceeds the operational and maintenance requirements, and promotes economically advantageous life cycle costs. 3.4 Material. 3.4.1 Yarn. The yarn shall be te

37、xtured continuous filament nylon. Testing shall be as speci-fied in 4.4.5. 3.4.1.1 Yarn denier. The yarn denier shall be 1000 for Type I, 725 for Type II, 500 for Type III and 330 for Type IV. Testing shall be as specified in 4.4.5. 3.5 Color. 3.5.1 Style A, solid shades. The Style A finished cloth

38、shall be dyed in one of the following shades or as otherwise specified in the contract or purchase order: Camouflage Green 483, Foli-age Green 504, Urban Gray 505. Coyote 498, Coyote Brown 3758, Tan 380 and Arctic White (see 6.2). 3.5.2 Style B, Woodland Camouflage print. The Style B finished cloth

39、shall be dyed to a ground shade either matching or approximating Light Green 354 and then overprinted with the applicable Woodland Camouflage colors by roller or screen printing. When the ground shade is dyed to match Light Green 354, the remaining colors shall be obtained by subsequent printing usi

40、ng three rollers or screens, as appropriate for the Dark Green 355, Brown 356 and Black 357 areas of the pattern. When the ground shade is dyed to approximate Light Green 354, all four colors of the camouflage pattern shall be obtained by subsequent printing using four rollers or screens to match al

41、l four colors. The dyeing of the ground shade approximating Light Green 354 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-32439 7 and the printing shall be accomplished by using a combination of acid dyes except for Black 357 only, carbon b

42、lack alone or in combination with acid dyes shall be used. Resin bonded pigments shall not be used. 3.5.3 Style C, Desert Camouflage print (3 color). The Style C finished cloth shall be dyed to a ground shade either matching or approximating Light Tan 492 and then overprinted with the applicable Des

43、ert Camouflage colors by roller or screen printing. When the ground shade is dyed to match Light Tan 492, the remaining colors shall be obtained by subsequent printing us-ing two rollers or screens, as appropriate for the Light Brown 493 and Light Khaki 494 areas of the pattern. When the ground shad

44、e is dyed to approximate Light Tan 492, all three colors of the camouflage pattern shall be obtained by subsequent printing using three rollers or screens to match all three colors. Resin bonded pigments shall not be used. 3.5.4 Style D, Universal Camouflage print. The Style D finished cloth shall b

45、e dyed to a ground shade either matching or approximating Desert Sand 500 and then overprinted with the camouflage pattern by roller or screen printing. When the ground shade is dyed to match Desert Sand 500, the remaining colors shall be obtained by subsequent printing using two rollers or screens,

46、 as appropriate for the Urban Gray 501 and Foliage Green 502 areas of the pattern. When the ground shade is dyed to approximate Desert Sand 500, all three colors of the camou-flage pattern shall be obtained by subsequent printing using three rollers or screens to match all three colors. Resin bonded

47、 pigments shall not be used. 3.5.5 Style E, MARPAT Woodland Camouflage print. The Style E finished cloth shall be dyed to a ground shade either matching or approximating Khaki 475 and then overprinted with the camouflage pattern by roller or screen printing. When the ground shade is dyed to match Kh

48、aki 475, the remaining colors shall be obtained by subsequent printing using three rollers or screens, as appropriate for the Green 474, Coyote 476 and Black 477 areas of the pattern. When the ground shade is dyed to approximate Khaki 475, all four colors of the camouflage pattern shall be obtained

49、by subsequent printing using four rollers or screens to match all four colors. Resin bonded pigments shall not be used. 3.5.6 Style F, MARPAT Desert Camouflage print. The Style F finished cloth shall be dyed to a ground shade either matching or approximating Light Tan 479 and then overprinted with the camouflage pattern by roller or screen