DLA MIL-DTL-15098 11 C-2010 LAMPS GLOW INDICATOR TYPES C7A C9A A1G AND A1H.pdf

《DLA MIL-DTL-15098 11 C-2010 LAMPS GLOW INDICATOR TYPES C7A C9A A1G AND A1H.pdf》由会员分享，可在线阅读，更多相关《DLA MIL-DTL-15098 11 C-2010 LAMPS GLOW INDICATOR TYPES C7A C9A A1G AND A1H.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、AMSC N/A FSC 6240 INCH-POUND MIL-DTL-15098/11C 23 August 2010 SUPERSEDING MIL-L-15098/11B 16 December 1977 DETAIL SPECIFICATION SHEET LAMPS, GLOW, INDICATOR, TYPES C7A, C9A, A1G, AND A1H This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirem

2、ents for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-15098, “Lamps, Glow, General Specification for“.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-15098/11C 2 NOTES: 1. Dimensions are in inch

3、es. 2. Metric equivalents are given for general information only and are based upon 1 inch = 25.4 mm. 3. No portion of the bulb shall be more than .125 (3.18 mm) from the extended lamp base axis. FIGURE 1. Indicator glow lamp, types C7A, C9A, A1G, and A1H. Provided by IHSNot for ResaleNo reproductio

4、n or networking permitted without license from IHS-,-,-MIL-DTL-15098/11C 3 REQUIREMENTS: Design and construction: See figure 1 and table I. Vibration: See table I. Shock: Method II of MIL-DTL-15098. Part number: M15098/11 - (Dash number from table I). TABLE I. Dash numbers and characteristics. Dash

5、no. Characteristic 001 002 003 004 Bulbs shape and size T2 T2 T2 T2 Maximum overall length (inch) 0.938 0.938 0.755 0.755 Base SMF SMF SMF SMF Electrode shape W11 W11 W11 W11 Electrode length (millimeter, nominal) 7 7 5 5 Distance from end of electrode to end of bulb (inch, nominal) 0.188 0.188 0.15

6、6 0.156 Series resistor Ohms 100,000 30,000 220,000 47,000 Location External External External External Characteristic gas Neon Neon Neon Neon Glow color Red Red Red Red Watts (nominal) 0.083 0.250 0.040 0.144 Application Indicator Indicator Indicator Indicator Brightness Standard High Standard High

7、 Nominal circuit voltage (volts) 120 AC 120 AC, 150 DC 120 AC or DC 120 AC, 150 DC Maximum voltage (volts) 65 AC, 90 DC 95 AC, 135 DC 65 AC, 90 DC 95 AC, 135 DC Design current (milliamperes) 0.7 1.9 0.3 1.2 Initial light output (lumens) 0.03 0.20 0.020 0.100 Vibration Not applicable Not applicable A

8、pplicable Applicable Average life at design current (hours) 25,000 25,000 25,000 25,000 Industry number ANSI C7A C9A A1G A1H Former lamp number NE-2D NE-2J - - CHANGES FROM PREVIOUS ISSUE. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to

9、the extent of the changes. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-15098/11C 4 Custodians: Preparing Activity: Army - CR Navy - SH Air Force - 99 DLA - GS DLA - GS2 (Project 6240-2010-013) Review Activities: Army - AR, CR4, MI Navy -

10、AS, CG Air Force - 71 DLA - IS NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST database at https:/assist.daps.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-