DLA DSCC-VID-V62 04613 REV C-2012 MICROCIRCUIT DIGITAL PC CARD CONTROLLERS MONOLITHIC SILICON.pdf
《DLA DSCC-VID-V62 04613 REV C-2012 MICROCIRCUIT DIGITAL PC CARD CONTROLLERS MONOLITHIC SILICON.pdf》由会员分享,可在线阅读,更多相关《DLA DSCC-VID-V62 04613 REV C-2012 MICROCIRCUIT DIGITAL PC CARD CONTROLLERS MONOLITHIC SILICON.pdf(14页珍藏版)》请在麦多课文档分享上搜索。
1、 REVISIONS LTR DESCRIPTION DATE APPROVED A Add new device case outline Y. Update boilerplate to current revision. - CFS 04-08-24 Thomas M. Hess B Correct lead finish on last page. -CFS 05-11-08 Thomas M. Hess C Update boilerplate paragraphs to current requirements. - phn 12-02-14 Thomas M. Hess CURR
2、ENT DESIGN ACTIVITY CAGE CODE 16236 HAS CHANGED NAMES TO: DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 Prepared in accordance with ASME Y14.24 Vendor item drawing REV PAGE REV PAGE REV STATUS OF PAGES REV C C C C C C C C C C C C C C PAGE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PMIC N/A PREPARED BY Phu H
3、. Nguyen DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO 43218-3990 Original date of drawing CHECKED BY Phu H. Nguyen TITLE MICROCIRCUIT, DIGITAL, PC CARD CONTROLLERS, MONOLITHIC SILICON YY MM DD 04-02-12 APPROVED BY Thomas M. Hess SIZE A CODE IDENT. NO. 16236 DWG NO. V62/04613 REV C PAGE 1 OF 14 AMS
4、C N/A 5962-V030-12 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO SIZE A CODE IDENT NO. 16236 DWG NO. V62/04613 REV C PAGE 2 1. SCOPE 1.1 Scope. This drawing documents the general requirements of a high
5、 performance PC Card controllers microcircuit, with an operating temperature range of -40C to +85C. 1.2 Vendor Item Drawing Administrative Control Number. The manufacturers PIN is the item of identification. The vendor item drawing establishes an administrative control number for identifying the ite
6、m on the engineering documentation: V62/04613 - 01 X E Drawing Device type Case outline Lead finish number (See 1.2.1) (See 1.2.2) (See 1.2.3) 1.2.1 Device type(s). 1/ Device type Generic Circuit function 01 PCI1520-EP PC card controllers 1.2.2 Case outline(s). The case outlines are as specified her
7、ein. Outline letter Number of pins JEDEC PUB 95 Package style X 209 Plastic ball grid array Y 208 JEDEC MO-136 Plastic quad flatpack 1.2.3 Lead finishes. The lead finishes are as specified below or other lead finishes as provided by the device manufacturer: Finish designator Material A Hot solder di
8、p B Tin-lead plate C Gold plate D Palladium E Gold flash palladium Z Other 1.3 Absolute maximum ratings. 2/ Supply voltage range, (VCC) . -0.5 V to +4.6 V Clamping voltage range, (VCCP, VCCA, VCCB) . -0.5 V to +6.0 V Input voltage range, (VI): PCI, miscellaneous . -0.5 V to VCCP+0.5 V Card A -0.5 V
9、to VCCA+0.5 V Card B -0.5 V to VCCB+0.5 V Fail safe . -0.5 V to VCC+0.5 V Output voltage range (VO): PCI, miscellaneous . -0.5 V to VCCP+0.5 V Card A -0.5 V to VCCA+0.5 V Card B -0.5 V to VCCB+0.5 V Fail safe . -0.5 V to VCC+0.5 V Input clamp current, IIK(VIVCC) . 20 mA 3/ Output clamp current, IOK(
10、VOVCC) . 20 mA 4/ Storage temperature range, (TSTG) -65C to +150C 1/ Users are cautioned to review the manufacturers data manual for additional user information relating to this device. 2/ Stresses beyond those listed under “absolute maximum rating” may cause permanent damage to the device. These ar
11、e stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. Provided by IHSNot for Resa
12、leNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO SIZE A CODE IDENT NO. 16236 DWG NO. V62/04613 REV C PAGE 3 1.4 Recommended operating conditions. 5/ Operation Min Max Unit Core voltage, (VCC) Commercial 3.3 V 3.0 3.6 V PCI and misc
13、ellaneous I/O clamp voltage, (VCCP) Commercial 3.3 V 3.0 3.6 V 5.0 V 4.75 5.25 PC Card I/O clamp voltage, (VCCA, VCCB) Commercial 3.3 V 3.0 3.6 V 5.0 V 4.75 5.25 High level input voltage, (VIH) 6/ PCI 3.3 V 0.5VCCPVCCPV 5.0 V 2.0 VCCPPC Card 3.3 V 0.475VCC(A/B)VCC(A/B)5.0 V 2.4 VCC(A/B)Miscellaneous
14、 7/ 2.0 VCCLow level input voltage, (VIL) 6/ PCI 3.3 V 0 0.3VCCPV 5.0 V 0 0.8 PC Card 3.3 V 0 0.325VCC(A/B)5.0 V 0 0.8 Miscellaneous 7/ 0 0.8 Input voltage, (VI) PCI 0 VCCPV PC Card 0 VCC(A/B)Miscellaneous 7/ 0 VCCOutput voltage, (VO) 8/ PCI 0 VCCV PC Card 0 VCCMiscellaneous 7/ 0 VCCInput transition
15、 time, (tt) (trand tf) PCI and PC Card 1 4 ns Miscellaneous 7/ 0 6 Operating ambient temperature range, (TA) PCI15201 -40 85 C 3/ Applies for external input and bidirectional buffers. VI VCCdoes not apply to fail safe terminals. PCI terminals and miscellaneous terminals are measured with respect to
16、VCCPinstead of VCC. PC Card terminals are measured with respect to VCCAor VCCB. The limit specified applies for a dc conditions. 4/ Applies for external output and bidirectional buffers. VO VCCdoes not apply to fail safe terminals. PCI terminals and miscellaneous terminals are measured with respect
17、to VCCPinstead of VCC. PC Card terminals are measured with respect to VCCAor VCCB. The limit specified applies for a dc conditions. 5/ Unused terminals (input or I/O) must be held high or low to prevent them from floating. 6/ Applies to external inputs and bidirectional buffers without hysteresis. 7
18、/ Miscellaneous terminals are 15, 56, 68, 75, 83, 124, 137, 144, 158, and 177 for the PDV packaged device, and C11, C15, G18, H05, J15, L18, P07, P09, U08, and U11 for the GHK packaged device ( SUSPEND , GRST , CDx , and VSx terminals). 8/ Applies to external output buffers. Provided by IHSNot for R
19、esaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO SIZE A CODE IDENT NO. 16236 DWG NO. V62/04613 REV C PAGE 4 2. APPLICABLE DOCUMENTS JEDEC SOLID STATE TECHNOLOGY ASSOCIATION (JEDEC) JEDEC PUB 95 Registered and Standard Outlines f
20、or Semiconductor Devices (Copies of these documents are available online at http:/www.jedec.org or from JEDEC Solid State Technology Association, 3103 North 10th Street, Suite 240S, Arlington, VA 22201.) 3. REQUIREMENTS 3.1 Marking. Parts shall be permanently and legibly marked with the manufacturer
21、s part number as shown in 6.3 herein and as follows: A. Manufacturers name, CAGE code, or logo B. Pin 1 identifier C. ESDS identification (optional) 3.2 Unit container. The unit container shall be marked with the manufacturers part number and with items A and C (if applicable) above. 3.3 Electrical
22、characteristics. The maximum and recommended operating conditions and electrical performance characteristics are as specified in 1.3, 1.4, and table I herein. 3.4 Design, construction, and physical dimension. The design, construction, and physical dimensions are as specified herein. 3.5 Diagrams. 3.
23、5.1 Case outlines. The case outlines shall be as shown in 1.2.2 and figure 1. 3.5.2 Terminal connections. The terminal connections shall be as shown in figure 2. 3.5.3 Block diagram. The block diagram shall be as specified in figure 3. Provided by IHSNot for ResaleNo reproduction or networking permi
24、tted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO SIZE A CODE IDENT NO. 16236 DWG NO. V62/04613 REV C PAGE 5 TABLE I. Electrical performance characteristics. 1/ Test Symbol Test condition -40C TA+85C 3.0 V VCC 3.6 V 3.0 V VCC(P/A/B) 3.6 V 2/ 4.75 V VCC(P/A/B) 5.25 V 3/
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- DLADSCCVIDV6204613REVC2012MICROCIRCUITDIGITALPCCARDCONTROLLERSMONOLITHICSILICONPDF

链接地址:http://www.mydoc123.com/p-689112.html