DLA DSCC-DWG-92028 REV A-2002 CONNECTORS RECEPTACLE ELECTRICAL FLEX-CIRCUIT TERMINATION ( 032) DOUBLE ROW DUAL ENTRY 100 CENTERS 025 POSTS《绕性电路终端( 032)双排 100中枢 025 POSTS插座连接器》.pdf

《DLA DSCC-DWG-92028 REV A-2002 CONNECTORS RECEPTACLE ELECTRICAL FLEX-CIRCUIT TERMINATION ( 032) DOUBLE ROW DUAL ENTRY 100 CENTERS 025 POSTS《绕性电路终端( 032)双排 100中枢 025 POSTS插座连接器》.pdf》由会员分享，可在线阅读，更多相关《DLA DSCC-DWG-92028 REV A-2002 CONNECTORS RECEPTACLE ELECTRICAL FLEX-CIRCUIT TERMINATION ( 032) DOUBLE ROW DUAL ENTRY 100 CENTERS 025 POSTS《绕性电路终端( 032)双排 100中枢 025 POSTS插座连接器》.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、REVISIONS LTR DSCCRIPTION DATE APPROVED A Change CAGE 14933 to 037Z3. Replace MIL-G-45204 with ASTM B488. Editorial changes throughout. 05/14/02 Robert M. Heber Prepared in accordance with ASME Y14.100 REV PAGE REV PAGE REV A A A A A A A A REV STATUS OF PAGES PAGE 1 2 3 4 5 6 7 8 PREPARED BY PMIC N/

2、A William Carpenter DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO 43216-5000 CHECKED BY TITLE James P. Donohue APPROVED BY Randy Larson CONNECTORS, RECEPTACLE, ELECTRICAL, FLEX-CIRCUIT TERMINATION (.032), DOUBLE ROW, DUAL ENTRY, .100 CENTERS, .025 POSTS SIZE CAGE CODE 037Z3 DWG. NO. 92028 Original

3、date of drawing 1 July 1994 A REV A PAGE 1 OF 8 AMSC N/A 5935-E643-41 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 92028 DEFENSE SUPPLY C

4、ENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV A PAGE 2 Inches mm .003 0.08 .004 0.10 .010 0.25 .013 0.33 .029 0.74 .030 0.76 .034 0.86 .047 1.19 .050 1.27 .100 2.54 .147 3.73 .200 5.08 .276 7.01 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. 3. Unle

5、ss otherwise specified tolerances shall be .005 inch (0.13 mm). 4. Contact design is optional. 5. Position of contact tail is optional provided it has a minimum thickness of .006 inch (0.15 mm) and a typical reference width of .030 inch (0.076 mm). FIGURE 1. Dimensions and configuration. .100 TYP (A

6、S REQD) NON-ACCUM .100 .035 .003 TYP DIA SEE NOTE 4 .276 REF DIM B REF .100 TYP .147 AT HOUSING .050 .010 .047 REF (2 PLS) .100 SEE NOTE 5 SEE NOTE 5 SEE NOTE 4 DIM A .004 .100 .004 .013 REF .200 .034 TYP SQ .100 REF Provided by IHSNot for ResaleNo reproduction or networking permitted without licens

7、e from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 92028 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV A PAGE 3 Dimensions A and B. 1/ 2/ Dash number Dimension A center to center Dimension B overall length Number of contacts Inches mm Inches mm 01 .000 0.00 .100 2.54 2 02 .100 2.54 .200 5.0

8、8 4 03 .200 5.08 .300 7.62 6 04 .300 7.62 .400 10.16 8 05 .400 10.16 .500 12.70 10 06 .500 12.70 .600 15.24 12 07 .600 15.24 .700 17.78 14 08 .700 17.78 .800 20.32 16 09 .800 20.32 .900 22.86 18 10 .900 22.86 1.000 25.40 20 11 1.000 25.40 1.100 27.94 22 12 1.100 27.94 1.200 30.48 24 13 1.200 30.48 1

9、.300 33.02 26 14 1.300 33.02 1.400 35.56 28 15 1.400 35.56 1.500 38.10 30 16 1.500 38.10 1.600 40.64 32 17 1.600 40.64 1.700 43.18 34 18 1.700 43.18 1.800 45.72 36 19 1.800 45.72 1.900 48.26 38 20 1.900 48.26 2.000 50.80 40 21 2.000 50.80 2.100 53.34 42 22 2.100 53.34 2.200 55.88 44 23 2.200 55.88 2

10、.300 58.42 46 24 2.300 58.42 2.400 60.96 48 25 2.400 60.96 2.500 63.50 50 26 2.500 63.50 2.600 66.04 52 27 2.600 66.04 2.700 68.58 54 28 2.700 68.58 2.800 71.12 56 29 2.800 71.12 2.900 73.66 58 30 2.900 73.66 3.000 76.20 60 31 3.000 76.20 3.100 78.48 62 32 3.100 78.48 3.200 81.28 64 33 3.200 81.28 3

11、.300 83.82 66 34 3.300 83.82 3.400 86.36 68 35 3.400 86.36 3.500 88.90 70 36 3.500 88.90 3.600 91.44 72 37 3.600 91.44 3.700 93.98 74 38 3.700 93.98 3.800 96.52 76 39 3.800 96.52 3.900 99.06 78 40 3.900 99.06 4.000 101.06 80 1/ Dimensions are in inches. 2/ Metric equivalents are given for general in

12、formation only. FIGURE 1. Dimensions and configurations - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 92028 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV A PAGE 4 TABLE I. Contact finishes.

13、PIN designator Contact PC Tail plating C 30 microinches gold (0.76 m) 1/ Tin/lead D 50 microinches gold (1.27 m) 1/ Tin/lead E 50 microinches gold (1.27 m) 2/ Tin/lead 1/ Thickness of gold in contact area, gold flash on remainder of contact. 2/ Thickness of gold in contact area, 50 microinches (1.27

14、 m) of gold on entire contact. TABLE II. Number of positions. Dash numbers Number of positions Dash numbers Number of positions 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 2X1 2X2 2X3 2X4 2X5 2X6 2X7 2X8 2X9 2X10 2X11 2X12 2X13 2X14 2X15 2X16 2X17 2X18 2X19 2X20 21 22 23 24 25 26 27

15、28 29 30 31 32 33 34 35 36 37 38 39 40 2X21 2X22 2X23 2X24 2X25 2X26 2X27 2X28 2X29 2X30 2X31 2X32 2X33 2X34 2X35 2X36 2X37 2X38 2X39 2X40 TABLE III. Temperature range. PIN Designator Temperature range C Blank -40 to +105 M -55 to +125 H -65 to +220 Provided by IHSNot for ResaleNo reproduction or ne

16、tworking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 92028 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV A PAGE 5 REQUIREMENTS: Shall meet the requirements of drawing number 92024. Design and construction: Dimensions and configurations: See figure 1, and table

17、s I, II, and III. Materials: Housing: The insulator shall be glass-mineral-filled nylon in accordance with ASTM D4066 or glass filled thermoplastic in accordance with MIL-M-24519. All plastic shall be rated V-0 in accordance with UL-94. Contact body: Copper alloy in accordance with C770, 1/4 hard br

18、ass or beryllium copper. Spring: Heat treated beryllium copper. NOTE: When contact body and spring are an integral part of the contact design they shall be of the same material. Plating: See table II for contact and tail platings. Spring: Gold flash on spring in accordance with ASTM B488, code C, ty

19、pe 2, class 0.25 minimum. Electrical: Body: Dielectric withstanding voltage: 1,250 volts rms, 60 Hz at sea level. Contact: Maximum current rating: 3 amperes rms at sea level. Environmental: Operating temperature range: See table III. Resistance to soldering heat: Only applicable to “H” temperature r

20、ange, see table III. Mechanical: Body: Contact retention: 1.5 pounds (0.68 kg) minimum, per position. Contact: Durability: 50 cycles (mating and unmating). Interface: Mates to .025 inch (0.63 mm) square pin on .100 inch (2.54 mm) true centers. See DSCC drawings 89042, 86102, and 92023. Mating pin le

21、ngth: .190 inch (4.83 mm) minimum, .240 inch (6.10 mm) maximum. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 92028 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV A PAGE 6 Flex-circuit board: Board thickn

22、ess: .032 (0.81 mm). Hole pattern: See figure 1. Marking: The Part or Identifying Number (PIN) shall be marked on the package in accordance with MIL-STD-1285. The PIN shall include the complete DSCC PIN, manufacturers name or CAGE code, and date code. The marking shall be permanent and legible in ac

23、cordance with method 215 of MIL-STD-202. The PIN shall be constructed in the following format: 92028 X XX Z DSCC drawing Plating Number of positions Temp. range number (see table I) (see table II) designator (see table III) Provided by IHSNot for ResaleNo reproduction or networking permitted without

24、 license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 92028 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV A PAGE 7 Approved sources of supply are listed herein. Additional sources will be added as they become available. The vendors listed on the requirements drawing have agreed to this

25、drawing and a certificate of compliance has been submitted to DSCC-VAI. Vendors PIN 1/ DSCC PIN Vendor CAGE 8N187 2/ Vendor CAGE 67720 3/ 4/ 92028-X-X-01Z 92028-X-X-02Z 92028-X-X-03Z 92028-X-X-04Z 92028-X-X-05Z 92028-X-X-06Z 92028-X-X-07Z 92028-X-X-08Z 92028-X-X-09Z 92028-X-X-10Z 92028-X-X-11Z 92028

26、-X-X-12Z 92028-X-X-13Z 92028-X-X-14Z 92028-X-X-15Z 92028-X-X-16Z 92028-X-X-17Z 92028-X-X-18Z 92028-X-X-19Z 92028-X-X-20Z 92028-X-X-21Z 92028-X-X-22Z 92028-X-X-23Z 92028-X-X-24Z 92028-X-X-25Z 92028-X-X-26Z 92028-X-X-27Z 92028-X-X-28Z 92028-X-X-29Z 92028-X-X-30Z 92028-X-X-31Z 92028-X-X-32Z 92028-X-X-3

27、3Z 92028-X-X-34Z 92028-X-X-35Z 92028-X-X-36Z 92028-X-X-37Z 92028-X-X-38Z 92028-X-X-39Z 92028-X-X-40Z 68776-802 68776-803 68776-804 68776-804 68776-805 68776-806 68776-807 68776-808 68776-809 68776-810 68776-811 68776-812 68776-813 68776-814 68776-815 68776-816 68776-817 68776-818 68776-819 68776-820

28、 68776-821 68776-822 68776-823 68776-824 68776-825 68776-826 68776-827 68776-828 68776-829 68776-830 68776-831 68776-832 68776-833 68776-834 68776-835 68776-836 - - - - *-121-02-4 *-121-04-4 *-121-06-4 *-121-08-4 *-121-10-4 *-121-12-4 *-121-14-4 *-121-16-4 *-121-18-4 *-121-20-4 *-121-22-4 *-121-24-4

29、 *-121-26-4 *-121-28-4 *-121-30-4 *-121-32-4 *-121-34-4 *-121-36-4 *-121-38-4 *-121-40-4 *-121-42-4 *-121-44-4 *-121-46-4 *-121-48-4 *-121-50-4 *-121-52-4 *-121-54-4 *-121-56-4 *-121-58-4 *-121-60-4 *-121-62-4 *-121-64-4 *-121-66-4 *-121-68-4 *-121-70-4 *-121-72-4 *-121-74-4 *-121-76-4 *-121-78-4 *-

30、121-80-4 1/ Parts must be purchased to this DSCC PIN to assure that all performance requirements and tests are met. 2/ Vendor PIN covers “C” contact finish. 3/ Vendor PIN covers “Blank” and “M” temperatures only. 4/ Asterisks replaced by the number 36 for “C” contact finish, 56 for “D” contact finis

31、h, and 556 for “E” contact finish. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 92028 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV A PAGE 8 Vendor CAGE Vendor name number and address 67720 Cristek Interconnects, Incorporated 1301 South Lewis Street Anaheim, CA 92805-6431 8N187 T.T.I. 4033 East Bellknap Street Fort Worth, TX 76111-6600 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-