DLA DSCC-DWG-92027 REV A-2002 CONNECTORS RECEPTACLE FLEX-CIRCUIT TERMINATION ( 032) TOP ENTRY DOUBLE ROW 100 CENTERS 025 POSTS《绕性终端( 032)双排 100中枢 025 POSTS插座连接器》.pdf

《DLA DSCC-DWG-92027 REV A-2002 CONNECTORS RECEPTACLE FLEX-CIRCUIT TERMINATION ( 032) TOP ENTRY DOUBLE ROW 100 CENTERS 025 POSTS《绕性终端( 032)双排 100中枢 025 POSTS插座连接器》.pdf》由会员分享，可在线阅读，更多相关《DLA DSCC-DWG-92027 REV A-2002 CONNECTORS RECEPTACLE FLEX-CIRCUIT TERMINATION ( 032) TOP ENTRY DOUBLE ROW 100 CENTERS 025 POSTS《绕性终端( 032)双排 100中枢 025 POSTS插座连接器》.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、REVISIONS LTR DSCCRIPTION DATE APPROVED A Change CAGE 14933 to 037Z3. Replace MIL-G-45204 with ASTM B488. Editorial changes throughout. 05/14/02 Robert M. Heber Prepared in accordance with ASME Y14.100 REV PAGE REV PAGE REV A A A A A A A A REV STATUS OF PAGES PAGE 1 2 3 4 5 6 7 8 PREPARED BY PMIC N/

2、A William Carpenter DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO 43216-5000 CHECKED BY TITLE James P. Donohue APPROVED BY Randy Larson CONNECTORS, RECEPTACLE, FLEX-CIRCUIT TERMINATION (.032), TOP ENTRY, DOUBLE ROW, .100 CENTERS, .025 POSTS SIZE CAGE CODE 037Z3 DWG. NO. 92027 Original date of drawi

3、ng 1 July 1994 A REV A PAGE 1 OF 8 AMSC N/A 5935-E643-42 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 92027 DEFENSE SUPPLY CENTER, COLUMB

4、US COLUMBUS, OH 43216-5000 A REV A PAGE 2 Inches mm .003 0.08 .004 0.10 .010 0.25 .013 0.33 .029 0.74 .034 0.86 .035 0.89 .047 1.19 .050 1.27 .100 2.54 .240 6.10 .325 8.26 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. 3. Unless otherwise specified

5、tolerances shall be .005 inch (0.13 mm). 4. Contact design is optional. 5. Position of contact tail is optional provided it has a minimum thickness of .006 inch (0.15 mm) and a typical reference width of .030 inch (0.076 mm) inch. FIGURE 1. Dimensions and configuration. SEE NOTE 4 .035 .003 TYP DIA

6、.100 TYP (AS REQD) NON-ACCUM .100 DIM B REF .100 TYP .047 REF (2 PLS) .050 .010 .325 .010 .013 REF SEE NOTE 5 .100 AT HOUSING SEE NOTE 5 SEE NOTE 4 DIM A .004 .100 .004 .034 TYP SQ .200 .100 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE C

7、ODE DWG NO. 037Z3 92027 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV A PAGE 3 Dimensions A and B. 1/ 2/ Dash number Dimension A center to center Dimension B overall length Number of contacts Inches mm Inches mm 01 .000 0.00 .100 2.54 2 02 .100 2.54 .200 5.08 4 03 .200 5.08 .300 7.62

8、 6 04 .300 7.62 .400 10.16 8 05 .400 10.16 .500 12.70 10 06 .500 12.70 .600 15.24 12 07 .600 15.24 .700 17.78 14 08 .700 17.78 .800 20.32 16 09 .800 20.32 .900 22.86 18 10 .900 22.86 1.000 25.40 20 11 1.000 25.40 1.100 27.94 22 12 1.100 27.94 1.200 30.48 24 13 1.200 30.48 1.300 33.02 26 14 1.300 33.

9、02 1.400 35.56 28 15 1.400 35.56 1.500 38.10 30 16 1.500 38.10 1.600 40.64 32 17 1.600 40.64 1.700 43.18 34 18 1.700 43.18 1.800 45.72 36 19 1.800 45.72 1.900 48.26 38 20 1.900 48.26 2.000 50.80 40 21 2.000 50.80 2.100 53.34 42 22 2.100 53.34 2.200 55.88 44 23 2.200 55.88 2.300 58.42 46 24 2.300 58.

10、42 2.400 60.96 48 25 2.400 60.96 2.500 63.50 50 26 2.500 63.50 2.600 66.04 52 27 2.600 66.04 2.700 68.58 54 28 2.700 68.58 2.800 71.12 56 29 2.800 71.12 2.900 73.66 58 30 2.900 73.66 3.000 76.20 60 31 3.000 76.20 3.100 78.48 62 32 3.100 78.48 3.200 81.28 64 33 3.200 81.28 3.300 83.82 66 34 3.300 83.

11、82 3.400 86.36 68 35 3.400 86.36 3.500 88.90 70 36 3.500 88.90 3.600 91.44 72 37 3.600 91.44 3.700 93.98 74 38 3.700 93.98 3.800 96.52 76 39 3.800 96.52 3.900 99.06 78 40 3.900 99.06 4.000 101.06 80 1/ Dimensions are in inches. 2/ Metric equivalents are given for general information only. FIGURE 1.

12、Dimensions and configurations - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 92027 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV A PAGE 4 TABLE I. Contact finishes. PIN designator Contact PC

13、Tail plating B 10 microinches gold (0.25 m) 1/ Tin/lead C 30 microinches gold (0.76 m) 2/ Tin/lead D 50 microinches gold (1.27 m) 2/ Tin/lead E 50 microinches gold (1.27 m) 3/ Tin/lead 1/ Thickness of gold in contact area, 10 microinches (0.25 m) gold on entire contact. 2/ Thickness of gold in conta

14、ct area, gold flash on remainder of contact. 3/ Thickness of gold in contact area, 50 microinches (1.27 m). TABLE II. Number of positions. Dash numbers Number of positions Dash numbers Number of positions 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 2X1 2X2 2X3 2X4 2X5 2X6 2X7 2X8 2X9

15、 2X10 2X11 2X12 2X13 2X14 2X15 2X16 2X17 2X18 2X19 2X20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 2X21 2X22 2X23 2X24 2X25 2X26 2X27 2X28 2X29 2X30 2X31 2X32 2X33 2X34 2X35 2X36 2X37 2X38 2X39 2X40 TABLE III. Temperature range. PIN designator Temperature range C Blank -40 to +105 M

16、 -55 to +125 H -65 to +220 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 92027 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV A PAGE 5 REQUIREMENTS: Shall meet the requirements of drawing number 92024. De

17、sign and construction: Dimensions and configurations: See figure 1, and tables I, II, and III. Materials: Housing: The insulator shall be glass-mineral-filled nylon in accordance with ASTM D4066 or glass filled thermoplastic in accordance with MIL-M-24519. All plastic shall be rated V-0 in accordanc

18、e with UL-94. Contact body: Copper alloy in accordance with C770, 1/4 hard brass or beryllium copper. Spring: Heat treated beryllium copper. NOTE: When contact body and spring are an integral part of the contact design they shall be of the same material. Plating: See table II for contact and tail pl

19、atings. Spring: Gold flash on spring in accordance with ASTM B488, code C, type 2, class 0.25 minimum. Electrical: Body: Dielectric withstanding voltage: 1,250 volts rms, 60 Hz at sea level. Contact: Maximum current rating: 3 amperes rms at sea level. Environmental: Operating temperature range: See

20、table III. Resistance to soldering heat: Only applicable to “H” temperature range, see table III. Mechanical: Body: Contact retention: 1.5 pounds (0.68 kg) minimum, per position. Contact: Durability: 50 cycles (mating and unmating). Interface: Mates to .025 inch (0.63 mm) square pin on .100 inch (2.

21、54 mm) true centers. See DSCC drawings 89042, 86102, and 92023. Mating pin length: .190 inch (4.83 mm) minimum, .240 inch (6.10 mm) maximum. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 92027 DEFENSE SUPPLY CENTER, COL

22、UMBUS COLUMBUS, OH 43216-5000 A REV A PAGE 6 Flex-circuit board: Board thickness: .032 (0.81 mm). Hole pattern: See figure 1. Marking: The Part or Identifying Number (PIN) shall be marked on the package in accordance with MIL-STD-1285. The PIN shall include the complete DSCC PIN, manufacturers name

23、or CAGE code, and date code. The marking shall be permanent and legible in accordance with method 215 of MIL-STD-202. The PIN shall be constructed in the following format: 92027 X XX Z DSCC drawing Plating Number of positions Temp. range number (see table I) (see table II) designator (see table III)

24、 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 92027 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV A PAGE 7 Approved sources of supply are listed herein. Additional sources will be added as they become a

25、vailable. The vendors listed on the requirements drawing have agreed to this drawing and a certificate of compliance has been submitted to DSCC-VAI. Vendors PIN 1/ DSCC PIN Vendor CAGE 8N187 2/ Vendor CAGE 67720 3/ 4/ 92027-X-01Z 92027-X-02Z 92027-X-03Z 92027-X-04Z 92027-X-05Z 92027-X-06Z 92027-X-07

26、Z 92027-X-08Z 92027-X-09Z 92027-X-10Z 92027-X-11Z 92027-X-12Z 92027-X-13Z 92027-X-14Z 92027-X-15Z 92027-X-16Z 92027-X-17Z 92027-X-18Z 92027-X-19Z 92027-X-20Z 92027-X-21Z 92027-X-22Z 92027-X-23Z 92027-X-24Z 92027-X-25Z 92027-X-26Z 92027-X-27Z 92027-X-28Z 92027-X-29Z 92027-X-30Z 92027-X-31Z 92027-X-32

27、Z 92027-X-33Z 92027-X-34Z 92027-X-35Z 92027-X-36Z 92027-X-37Z 92027-X-38Z 92027-X-39Z 92027-X-40Z 68429-802 68429-803 68429-804 68429-804 68429-805 68429-806 68429-807 68429-808 68429-809 68429-810 68429-811 68429-812 68429-813 68429-814 68429-815 68429-816 68429-817 68429-818 68429-819 68429-820 68

28、429-821 68429-822 68429-823 68429-824 68429-825 68429-826 68429-827 68429-828 68429-829 68429-830 68429-831 68429-832 68429-833 68429-834 68429-835 68429-836 - - - - *-121-02-3 *-121-04-3 *-121-06-3 *-121-08-3 *-121-10-3 *-121-12-3 *-121-14-3 *-121-16-3 *-121-18-3 *-121-20-3 *-121-22-3 *-121-24-3 *-

29、121-26-3 *-121-28-3 *-121-30-3 *-121-32-3 *-121-34-3 *-121-36-3 *-121-38-3 *-121-40-3 *-121-42-3 *-121-44-3 *-121-46-3 *-121-48-3 *-121-50-3 *-121-52-3 *-121-54-3 *-121-56-3 *-121-58-3 *-121-60-3 *-121-62-3 *-121-64-3 *-121-66-3 *-121-68-3 *-121-70-3 *-121-72-3 *-121-74-3 *-121-76-3 *-121-78-3 *-121

30、-80-3 1/ Caution: Parts must be purchased to this DSCC PIN to assure that all performance requirements and tests are met. 2/ Vendor PIN covers “C” contact finish. 3/ Vendor PIN covers “Blank” and “M” temperatures only. 4/ Asterisks replaced by the number 16 for “B” contact finish 36 for “C” contact

31、finish, 56 for “D” contact finish, and 556 for “E” contact finish. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 92027 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV A PAGE 8 Vendor CAGE Vendor name number and address 67720 Cristek Interconnects, Incorporated 1301 South Lewis Street Anaheim, CA 92805-6431 8N187 T.T.I. 4033 East Bellknap Street Fort Worth, TX 76111-6600 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-