DLA DSCC-DWG-89086 REV H-2009 CAPACITORS CERAMIC SINGLE IN-LINE PACKAGE NETWORK (4 CAPACITOR SECTIONS) CG.pdf

《DLA DSCC-DWG-89086 REV H-2009 CAPACITORS CERAMIC SINGLE IN-LINE PACKAGE NETWORK (4 CAPACITOR SECTIONS) CG.pdf》由会员分享，可在线阅读，更多相关《DLA DSCC-DWG-89086 REV H-2009 CAPACITORS CERAMIC SINGLE IN-LINE PACKAGE NETWORK (4 CAPACITOR SECTIONS) CG.pdf（7页珍藏版）》请在麦多课文档分享上搜索。

1、 REVISIONS LTR DESCRIPTION DATE APPROVED A Added suggested source of supply. 10 Jan 90 David E. Moore B Deleted suggested source of supply. 29 Jun 90 David E. Moore C Deleted and added suggested sources of supply. Modified 3.1.2 and figure 1. Added note for standoff. Editorial changes throughout. 24

2、 Feb 92 David E. Moore D Changes in accordance with NOR 5910-R019-96 23 May 96 Andrew R. Ernst E Added and removed suggested sources of supply. 25 August 99 Kendall A. Cottongim F Removed suggested source of supply. 10 May 00 Kenneth A. Bernier G Editorial changes made throughout. 6 October 2004 Ken

3、dall A. Cottongim H Changed drawing to source control with approved sources of supply. Added pure tin prohibition paragraph 3.1.3 and manufacturer eligibility paragraph 3.14. Editorial changes. 15 Dec 09 Michael A. Radecki Prepared in accordance with ASME Y14.100 Source control drawing REV STATUS RE

4、V H H H H H H H OF PAGES PAGES 1 2 3 4 5 6 7 PMIC N/A PREPARED BY ROBERT E. GRILLOT DESIGN ACTIVITY DEFENSE ELECTRONIC SUPPLY CENTER DAYTON, OH 45444-5000 Original date of drawing: 27 June 1989 CHECKED BY HERALDINE JOHNSON TITLE CAPACITORS, CERAMIC, SINGLE IN-LINE PACKAGE, NETWORK, (4 CAPACITOR SECT

5、IONS) CG APPROVED BY DAVID E. MOORE SIZE A CODE IDENT. NO. 14933 DWG NO. 89086 REV H PAGE 1 OF 7 AMSC N/A 5910-E453CURRENT DESIGN ACTIVITY CAGE CODE 037Z3 DEFENSE LOGISTICS AGENCY DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 Provided by IHSNot for ResaleNo reproduction or networking perm

6、itted without license from IHS-,-,-DEFENSE ELECTRONICS SUPPLY CENTER DAYTON, OHIO SIZE A CODE IDENT NO. 14933 DWG NO. 89086 REV H PAGE 2 1. SCOPE 1.1 Scope. This drawing and MIL-PRF-20 describe the complete requirements for single-in-line packaged multilayer ceramic capacitor networks. 1.2 Part or I

7、dentifying Number (PIN). The complete PIN shall be as follows: 2. APPLICABLE DOCUMENTS 2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This section does not include documents cited in other sections of this specification or recommended for a

8、dditional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents in sections 3 and 4 of this specification, whether or not they are listed. 2.2 Government documents

9、. 2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. DEPARTMENT OF DEFENSE SPECI

10、FICATIONS MIL-PRF-20 - Capacitors, Fixed, Ceramic Dielectric (Temperature Compensating), Established Reliability and Non-Established Reliability, General Specification for. DEPARTMENT OF DEFENSE STANDARDS MIL-STD-202 - Electronics and Electrical Component Parts. MIL-STD-1285 - Marking of Electrical

11、and Electronic Parts. (Copies of these documents are available online at https:/assist.daps.dla.mil/quicksearch/ or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) 2.3 Order of precedence. Unless otherwise noted herein or in the contract,

12、in the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3. REQUIREMENTS 3.1 Interface and phy

13、sical dimensions. The interface and physical dimensions shall be as specified in MIL-PRF-20 and herein (see figure 1). 3.1.1 Leads. Leads shall be as specified on figure 1. 3.1.2 Case. Molded or conformally coated. 3.1.3 Pure tin. The use of pure tin, as an underplate or final finish is prohibited b

14、oth internally and externally. Tin content of capacitor components and solder shall not exceed 97 percent, by mass. Tin shall be alloyed with a minimum of 3 percent lead, by mass (see 6.3). 3.1.4 Operating temperature range. The operating temperature range shall be -55C to +125C. 89086- XX Drawing n

15、umber Dash number (see table I) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE ELECTRONICS SUPPLY CENTER DAYTON, OHIO SIZE A CODE IDENT NO. 14933 DWG NO. 89086 REV H PAGE 3 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given

16、for general information only. 3. Standoff shape is optional. The minimum height of the standoff shall be .015 (0.38 mm). 4. Lead spacing .100 .010 (25.4 0.25 mm) noncumulative. FIGURE 1. Case dimensions and configuration. Inches mm Inches mm .002 .003 .004 .010 .012 .015 .018 0.05 0.08 0.10 0.25 0.3

17、0 0.38 0.46 .058 .060 .100 .115 .135 .300 .850 1.47 1.52 2.54 2.92 3.43 7.62 21.59 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE ELECTRONICS SUPPLY CENTER DAYTON, OHIO SIZE A CODE IDENT NO. 14933 DWG NO. 89086 REV H PAGE 4 3.2 Electrical ch

18、aracteristics. 3.2.1 Rated voltage. The rated voltage shall be 100 V dc at +85C, 50 V dc at +125C. 3.2.2 Dielectric type. CG (0 30ppm/C), in accordance with MIL-PRF-20. 3.2.3 Temperature coefficient and capacitance drift. In accordance with MIL-PRF-20. 3.2.4 Capacitance. See table I. Measured in acc

19、ordance with method 305 of MIL-STD-202, 1 kHz at 1.0 V rms at +25C. 3.2.5 Dissipation factor (+25C). 0.1 percent maximum (measured under the same conditions as capacitance). 3.2.6 Insulation resistance. Measured in accordance with method 302 of MIL-STD-202. At +25C, rated voltage: 100,000 megohms or

20、 1,000 megohms microfarad, whichever is less. 3.2.7 Dielectric withstanding voltage. Capacitors shall withstand a dc test potential of 250 percent of rated voltage for a period of not less than 1 second nor more than 5 seconds at +25C. The charging current shall not exceed 50 milliamperes. 3.2.8 Q f

21、actor. 1000 or greater (measured under the same conditions as capacitance). 3.2.9 Capacitance tolerance. J = 5 percent, K = 10 percent. 3.3 Solderability of terminals. In accordance with MIL-PRF-20. 3.4 Vibration. In accordance with method 204 of MIL-STD-202, test condition B (10 to 20,000 Hz, 15 gs

22、). 3.5 Shock. In accordance with MIL-PRF-20. 3.6 Immersion cycling. In accordance with MIL-PRF-20. 3.7 Moisture resistance. In accordance with MIL-PRF-20. 3.8 Life. 200 percent of rated voltage applied at +125C for 1,000 hours. 3.9 Thermal shock. In accordance with method 107 of MIL-STD-202, test co

23、ndition B except low temperature is -55C. 3.10 Voltage conditioning. In accordance with MIL-PRF-20, 200 percent of rated voltage. 3.11 Terminal strength. Capacitors shall withstand a steady pull of 5 pounds for 5 seconds in a direction parallel to the leads. 3.12 Marking. Marking shall be in accorda

24、nce with MIL-STD-1285 except the capacitors shall be marked with the PIN as specified herein (see 1.2), the manufacturers name or Commercial and Government Entity (CAGE) code, and date lot code as a minimum. 3.13 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or e

25、nvironmentally preferable materials should be used to the maximum extent possible provided that the material meets or exceeds the operational and maintenance requirements, and promotes economically advantageous life cycle costs. 3.14 Manufacturer eligibility. To be eligible for listing as an approve

26、d source of supply, a manufacturer shall be listed on the MIL-PRF-20, MIL-PRF-123, or MIL-PRF-49470 Qualified Products Database for at least one part, or perform the group A and group B inspections specified herein on a sample of parts agreed upon by the manufacturer and DSCC-VA. 3.15 Certificate of

27、 compliance. A certificate of compliance shall be required from manufacturers requesting to be an approved source of supply. 3.16 Workmanship. Capacitors shall be uniform in quality and free from any defects that will affect life, serviceability, or appearance. Provided by IHSNot for ResaleNo reprod

28、uction or networking permitted without license from IHS-,-,-DEFENSE ELECTRONICS SUPPLY CENTER DAYTON, OHIO SIZE A CODE IDENT NO. 14933 DWG NO. 89086 REV H PAGE 5 4. VERIFICATION 4.1 Sampling and inspection. Qualification sampling and inspection are not required. 4.2 Conformance inspection. 4.2.1 Ins

29、pection of product for delivery. Inspection of product for delivery shall consist of all tests specified in group A (ER) and group B inspections of MIL-PRF-20, provided they are listed in this drawing. PPM testing and calculation is not applicable. 4.2.2 Certification. The acquiring activity, at its

30、 discretion, may accept a certificate of compliance with group B requirements in lieu of performing group B tests (see 6.2d). TABLE I. Electrical characteristics. DSCC drawing 89086- Capacitance Capacitance tolerance DSCC drawing 89086- Capacitance Capacitance tolerance 01 02 03 04 05 06 07 08 09 10

31、 11 12 13 14 15 16 17 18 19 20 21 22 23 24 10 pF 10 pF 12 pF 12 pF 15 pF 15 pF 18 pF 18 pF 22 pF 22 pF 27 pF 27 pF 33 pF 33 pF 39 pF 39 pF 47 pF 47 pF 56 pF 56 pF 68 pF 68 pF 82 pF 82 pF J K J K J K J K J K J K J K J K J K J K J K J K 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46

32、 47 48 100 pF 100 pF 120 pF 120 pF 150 pF 150 pF 180 pF 180 pF 220 pF 220 pF 270 pF 270 pF 330 pF 330 pF 390 pF 390 pF 470 pF 470 pF 560 pF 560 pF 680 pF 680 pF 820 pF 820 pF J K J K J K J K J K J K J K J K J K J K J K J K 5. PACKAGING 5.1 Packaging. For acquisition purposes, the packaging requireme

33、nts shall be as specified in the contract or order (see 6.2). When packaging of materiel is to be performed by DoD or in-house contractor personnel, these personnel need to contact the responsible packaging activity to ascertain packaging requirements. Packaging requirements are maintained by the In

34、ventory Control Points packaging activities within the Military Service or Defense Agency, or within the military services system commands. Packaging data retrieval is available from the managing Military Departments or Defense Agencys automated packaging files, CD-ROM products, or by contacting the

35、 responsible packaging activity. 6. NOTES (This section contains information of a general or explanatory nature which may be helpful, but is not mandatory.) 6.1 Intended use. Capacitors conforming to this drawing are intended for use when military specifications do not exist and qualified military d

36、evices that will perform the required function are not available for original equipment manufacturer application. This drawing is intended exclusively to prevent the proliferation of unnecessary duplicate specifications, drawings, and stock catalog listings. When Provided by IHSNot for ResaleNo repr

37、oduction or networking permitted without license from IHS-,-,-DEFENSE ELECTRONICS SUPPLY CENTER DAYTON, OHIO SIZE A CODE IDENT NO. 14933 DWG NO. 89086 REV H PAGE 6 a military specification exists and the product covered by this drawing has been qualified for listing, this drawing becomes obsolete an

38、d will not be used for new design. 6.2 Ordering data. The contract or purchase order should specify the following: a. Complete PIN (see 1.2). b. Requirements for delivery of one copy of the conformance inspection data or certificate of compliance that parts have passed conformance inspection with ea

39、ch shipment of parts by the manufacturer. c. Requirements for packaging and packing. d. Whether the manufacturer performs the group B tests or provides certification of compliance with group B requirements. e. Requirements for notification of change of product to acquiring activity, if applicable. 6

40、.3 Tin whisker growth. The use of alloys with tin content greater than 97 percent, by mass, may exhibit tin whisker growth problems after manufacture. Tin whiskers may occur anytime from a day to years after manufacture and can develop under typical operating conditions, on products that use such ma

41、terials. Conformal coatings applied over top of a whisker-prone surface will not prevent the formation of tin whiskers. Alloys of 3 percent lead, by mass, have shown to inhibit the growth of tin whiskers. For additional information on this matter, refer to ASTM-B545 (Standard Specification for Elect

42、rodeposited Coatings of Tin). 6.4 Replaceability. Capacitors covered by this drawing will replace the same commercial device covered by contractor prepared specification or drawing. 6.5 Users of record. Coordination of this document for future revisions is coordinated only with the approved sources

43、of supply and the users of record of this document. Requests to be added as a recorded user of this drawing may be achieved online at capacitorfilterdla.mil or if in writing to: Defense Supply Center, Columbus, ATTN: DSCC-VAT, Post Office Box 3990, Columbus OH 43218-3990 or by telephone (614) 692-05

44、61 or DSN 850-0561. 6.6 Approved sources of supply. Approved sources of supply are listed herein. Additional sources will be added as they become available. Assistance in the use of this drawing may be achieved online at capacitorfilterdla.mil or by contacting Defense Supply Center, Columbus, ATTN:

45、DSCC-VAT, Post Office Box 3990, Columbus OH 43218-3990 or by telephone (614) 692-0561 or DSN 850-0561. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE ELECTRONICS SUPPLY CENTER DAYTON, OHIO SIZE A CODE IDENT NO. 14933 DWG NO. 89086 REV H PAGE

46、 7 DSCC drawing PIN 89086- Vendor similar type 1/ DSCC drawing PIN 89086- Vendor similar type 1/ Vendor CAGE Vendor name and address 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 N/A SPB11A100KH8 N/A SPB11A120KH8 N/A SPB11A150KH8 N/A SPB11A180KH8 SPB11A220JH8 SPB11A220KH8 S

47、PB11A270JH8 SPB11A270KH8 SPB11A330JH8 SPB11A330KH8 SPB11A390JH8 SPB11A390KH8 SPB11A470JH8 SPB11A470KH8 SPB11A560JH8 SPB11A560KH8 SPB11A680JH8 SPB11A680KH8 SPB11A820JH8 SPB11A820KH8 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 SPB11A101JH8 SPB11A101KH8 SPB11A121JH8 SPB11A12

48、1KH8 SPB11A151JH8 SPB11A151KH8 SPB11A181JH8 SPB11A181KH8 SPB11A221JH8 SPB11A221KH8 SPB11A271JH8 SPB11A271KH8 SPB11A331JH8 SPB11A331KH8 SPB11A391JH8 SPB11A391KH8 SPB11A471JH8 SPB11A471KH8 SPB11A561JH8 SPB11A561KH8 SPB11A681JH8 SPB11A681KH8 SPB11A821JH8 SPB11A821KH8 96095 Olean Advanced Products A Division of AVX Corporation 1695 Seneca Avenue Olean NY 14760-3736 1/ Parts must be purchased to this DSCC PIN to assure that all performance requirements and tests are met. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-