DLA DSCC-DWG-87028 REV C-2001 ADAPTER CONNECTOR COAXIAL RADIO FREQUENCY T SERIES SMA《射频同轴电缆连接器的适配器》.pdf

《DLA DSCC-DWG-87028 REV C-2001 ADAPTER CONNECTOR COAXIAL RADIO FREQUENCY T SERIES SMA《射频同轴电缆连接器的适配器》.pdf》由会员分享，可在线阅读，更多相关《DLA DSCC-DWG-87028 REV C-2001 ADAPTER CONNECTOR COAXIAL RADIO FREQUENCY T SERIES SMA《射频同轴电缆连接器的适配器》.pdf（6页珍藏版）》请在麦多课文档分享上搜索。

1、REVISIONS LTR DESCRIPTION DATE APPROVED A Add source 00795. Editorial changes. 6 July 1987 R Marbais B This drawing is inactive for new design. Future acquisitions are to be made to MIL-A-55339/30. 18 May 1995 Randy Larson C PIN and source update. 16 Nov 2001 Robert M. Heber REQUIREMENTS OF DRAWING

2、85017 ARE APPLICABLE. Prepared in accordance with DOD-STD-100 REV PAGE REV C C C C C C REV STATUS OF PAGES PAGE 1 2 3 4 5 6 PREPARED BY PMIC N/A Ron Gary DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO 43216-5000 CHECKED BY TITLE James P. Donohue APPROVED BY Richard Marbais ADAPTER, CONNECTOR, COAXIA

3、L, RADIO FREQUENCY, “T” SERIES SMA SIZE CAGE CODE 037Z3 DWG. NO. 87028 Original date of drawing 22 January 1987 A REV C PAGE 1 OF 6 AMSC N/A 5935-E621 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.INACTIVE FOR NEW DESIGN. FUTURE ACQUISTIONS ARE TO BE MADE TO MIL-PR

4、F-55339/30. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 87028 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV C PAGE 2 Part or Identifying Number (PIN): 8702815TP - 1 8702815TP - 5 (with safety wire hole

5、s) PIN 8702815TP - 2 Reference Series see note 4 Contact A B SMA SMA Socket Pin FIGURE 1. Adapter configuration .Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 87028 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-500

6、0 A REV C PAGE 3 PIN 8702815TP - 3 8702815TP - 6 (with safety wire holes) PIN 8702815TP - 4 8702815TP - 7 (with safety wire holes) NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. 3. All undimensioned pictorial representations are for reference purpos

7、es only. 4. Interfaces shall be in accordance with MIL-STD-348. FIGURE 1. Adapter configuration - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 87028 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A

8、REV C PAGE 4 ENGINEERING DATA: General configuration: See figure 1. Impedance: 50 ohms, nominal. Working voltage: Sea level: 335 V rms. 70,000 feet: 85 V rms. Frequency range: 0 to 12.4 GHz. Temperature range: -65C to +165C. REQUIREMENTS: Requirements of drawing 85017 are applicable. Dimensions: See

9、 figure 1. Center contact retention: Axial force: 6 pounds, minimum. Torque: 4 ounce- inches, minimum. Force to engage and disengage: Longitudinal force: Not applicable. Torque: 2 inch-pounds, maximum. Coupling proof torque: 15 pounds, minimum. Mating characteristics: Center contact (socket): Oversi

10、ze test pin diameter: .0375 +.0001 inch, minimum. Pin finish: 16 microinches. Insertion depth; .030/.045 inch, minimum. Number of insertions: 3. Maximum test pin (insertion force test): Steel test pin diameter: .0370 +.0001 inch, minimum. Pin finish: 16 microinches. Insertion depth: .050/.075 inch,

11、minimum. Insertion force: 3 pounds, maximum. Number of insertions: 1. Minimum test pin (withdrawal force): Steel test pin diameter: .0355 -.0001 inch, minimum. Pin finish: 16 microinches. Insertion depth: .050/.075 inch, minimum. Withdrawal force: 1 ounce, minimum. Number of withdrawals: 1. Outer co

12、ntact: See figure 310-1 of MIL-STD-348 for dimensions. Permeability: 2.0. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 87028 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV C PAGE 5 Seal: Pressurized: Not

13、 applicable. Weatherproof: Not applicable. Insulation resistance: 5,000 megohms, minimum. VSWR: Not applicable. RF leakage (total): Not applicable. RF insertion loss: Not applicable. Durability: 500 cycles minimum at 12 cycles per minute, maximum. The connector shall meet the mating characteristics

14、and force to engage and disengage requirements. Dielectric withstanding, test voltage: 1,000 V rms, minimum (sea level). Contact resistance (milliohms, maximum): Contact Initial After Center 6.0 8.0 Outer 2.0 Not applicable Vibration, high frequency, interruptions: 1s, maximum, test condition D. Sho

15、ck: Test condition I. Thermal shock: Test condition C. Moisture resistance: 200 megohms, minimum. Corona level: Voltage: 250 V, minimum. Altitude: 70,000 feet, minimum. RF high potential withstanding voltage: RF voltage: 670 V rms, minimum. Frequency: 5 MHz, minimum. Salt spray (corrosion): Test con

16、dition B. Coupling mechanism retention force: 60 pounds, minimum. Marking: 8702815TP-1 through 8702815TP-7. Application: These connectors are for use in RF applications only. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z

17、3 87028 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV C PAGE 6 Approved sources of supply are listed herein. Additional sources will be added as they become available. The vendors listed on the requirements drawing have agreed to this drawing and a certificate of compliance has been

18、submitted to DSCC-VAI. DSCC drawing PIN 1/ Vendor CAGE number Vendor reference PIN 8702815TP-1 00795 95077 1350-000-K000 SF2996-6008 8702815TP-2 00795 95077 1349-000-K000 SF2996-6001 8702815TP-3 00795 95077 1342-000-K000 SF2996-6016 8702815TP-4 00795 95077 1394-000-K000 SF2996-6018 8702815TP-5 00795

19、 95077 1350-000-K000-1 SF2996-6009 8702815TP-6 00795 95077 1342-000-K000-1 SF2996-6019 8702815TP-7 00795 95077 1394-000-K000-1 SF2996-6017 1/ Parts must be purchased to this DSCC PIN to assure that all performance requirements and tests are met. Vendor CAGE Vendor name number and address 00795 Delta Electronics 416 Cabot Street Beverly, MA 01915 95077 Soliton/Vector Microwave Products 3301 Electronics Way West Palm Beach, FL 33407 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-