DLA DSCC-DWG-10003-2010 FITTING HEXAGON PIPE NIPPLE 4-INCH LENGTH.pdf

《DLA DSCC-DWG-10003-2010 FITTING HEXAGON PIPE NIPPLE 4-INCH LENGTH.pdf》由会员分享，可在线阅读，更多相关《DLA DSCC-DWG-10003-2010 FITTING HEXAGON PIPE NIPPLE 4-INCH LENGTH.pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、REVISIONS LTR DESCRIPTION DATE APPROVED Prepared in accordance with ASME Y14.100 Altered item drawing REV PAGE REV STATUS OF PAGES REV PAGE 1 2 3 PMIC N/A PREPARED BY DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO 43218-3990 William Carpenter Original date of drawing 4 March 2010 CHECKED BY TITLE Er

2、nest Brown FITTING, HEXAGON PIPE NIPPLE, 4-INCH LENGTH APPROVED BY Abdo Abdouni SIZE CAGE CODE DWG. NO. 10003 A 037Z3 REV PAGE 1 OF 3 AMSC N/A 4730-F005-001 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH

3、43218-3990 SIZE CAGE CODE DWG NO. A 037Z3 10003 REV PAGE 2 Inches mm .02 2.5 4.00 0.51 63.5 101.6 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. Dimensions not specified shall be in accordance with SAE J514 12-12 140137. FIGURE 1. Nipple. SCOPE Scope. Th

4、is drawing outlines the requirements for an SAE J514 12-12 140137 S that is altered from the SAE-J514 standard part. The differences are the overall length, hex head dimension, see figure 1, and corrosion resistant steel (CRES) 304. Qualification inspection. Qualification inspection for the pipe nip

5、ple specified herein shall not be required. REQUIREMENTS Design configuration. The design, construction, and physical dimensions shall be as specified on figure 1 and SAE-J514. Material: CRES alloy 304. Solution anneal Marking: The Part or Identifying Number (PIN) shall be marked on the package in a

6、ccordance with MIL-STD-1285. The marking shall include the complete DSCC PIN, manufacturers name or CAGE code, and date code. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43218-3990 SIZE CAGE CODE DWG N

7、O. A 037Z3 10003 REV PAGE 3 The PIN shall be constructed using the following format: 10003 -12-12 DSCC Nipple Requirement Drawing NOTES: 1. CRES alloy 304 is susceptible to stress corrosion cracking (SCC) in halides because of its relatively low nickel content. Conditions which cause SCC are: (1) pr

8、esence of halide ions (generally chloride), (2) residual tensile stresses, and (3) temperatures in excess of 120F (49C). 2. Avoid acids such as hydrofluoric or hydrochloric. 3. For material exposed inland, light industrial, or milder service, minimum maintenance is required. Only sheltered areas nee

9、d occasional washing with a stream of pressurized water. In heavy industrial areas, frequent washing is advisable to remove dirt deposits which might eventually cause corrosion. PACKAGING Packaging. For acquisition purposes, the packaging requirements shall be as specified in the contract or order.

10、When packaging of material is to be performed by DoD or in-house contractor personnel, these personnel need to contact the responsible packaging activity to ascertain packaging requirements. Packaging requirements are maintained by the Inventory Control Points packaging activities within the Militar

11、y Service or Defense Agency, or within the Military Departments System Command. Packaging data retrieval is available from the managing Military Departments or Defense Agencys automated packaging files, CD-ROM products, or by contacting the responsible packaging activity. DSCC drawing use. Nipples i

12、n accordance to this drawing are intended for use when military specifications do not exist and qualified military connectors that will perform the required function are not available for OEM application. This drawing is intended exclusively to prevent the proliferation of unnecessary duplicate spec

13、ifications, drawings, and stock catalog listings. Acquisition requirements. Acquisition documents should specify the following: a. Complete PIN. b. Requirements for certificate of compliance, if applicable. c. Packaging requirements. Comments. Comments on this drawing should be directed to Defense Supply Center, Columbus, ATTN: DSCC-VAI, P.O. Box 3990 Columbus, Ohio 43218-3990 or telephone (614) 692-0565, facsimile (614) 692-6940 or emailed to FluidFlowdscc.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-