DLA DSCC-DWG-08007 REV A-2008 MANIFOLD TWO 1 2 INCH PORTS 2 INCH INLET.pdf

《DLA DSCC-DWG-08007 REV A-2008 MANIFOLD TWO 1 2 INCH PORTS 2 INCH INLET.pdf》由会员分享，可在线阅读，更多相关《DLA DSCC-DWG-08007 REV A-2008 MANIFOLD TWO 1 2 INCH PORTS 2 INCH INLET.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、REVISIONS LTR DESCRIPTION DATE APPROVED A Change CAGE code from 037Z3 to 16236 and e-mail address for comments. Removed approved sources requirements. 4 June 2008 A. Abdouni Prepared in accordance with ASME Y14.100 Detail Drawing REV PAGE REV A A A A REV STATUS OF PAGES PAGE 1 2 3 4 PREPARED BY PMIC

2、 N/A William Carpenter DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO 43218-3990 CHECKED BY TITLE Ernest Brown APPROVED BY Abdonasser M. Abdouni MANIFOLD, TWO 1/2 INCH PORTS, 2 INCH INLET SIZE CAGE CODE 16236 DWG. NO.08007 Original date of drawing 6 March 2008 A REV A PAGE 1 OF 4 AMSC N/A 2520-M002-

3、000 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. .500 R 5 PLACES1.125.8441.688.469.563 , 4 HOLES3.0631.6881.0001.53223.8132.0002.0004.0001.250.625.500 - 14 DRYSEAL NPTF, 1.09 SPOT FACE, 2XSEE DETAIL ABREAK CORNERS.005 R.015.

4、025.187.1770-52 PL.107.101323PL 2.512125125+.000-.0252.500.125 X 45, 2 PLACESRFIGURE 1. Manifold. 16236 08007 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43218-3990 A REVA PAGE2 Inches mm .005 .015 .101 .107 .125 .177 .187 .469 .500 .563 .625 .844 1.000 1.09 1.125 1.250 1.532) 1.688 2.000 2.500 2.5

5、12 3.063 3.813 4.000 0.13 0.38 2.57 2.72 3.18 4.50 4.75 11.91 12.70 14.30 15.88 21.44 25.40 27.69 28.58 31.75 38.91 42.88 50.80 63.50 63.80 77.80 96.85 101.60 DETAIL A Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. NOTES: 1. D

6、imensions are in inches. 2. Metric equivalents are given for information only. 3. Unless otherwise specified tolerances for 3 place decimals is .010 inch (0.25 mm) and angular dimensions 5. 4. Remove all burrs and sharp edges. 5. Surface finish shall be in accordance with ASME B46.1. FIGURE 1. Manif

7、old - Continued. REQUIREMENTS: Dimensions and configurations: See figure 1. Material: Aluminum alloy 6061 temper T6 in accordance with SAE-AMS-QQ-A-200/8. Chemical film: In accordance with MIL-DTL-5541, type II, class 1A. Parts shall withstand 96 hours minimum of salt spray testing in accordance AST

8、M B117. Workmanship. Manifolds shall be free from cracks, laps, seams, burrs, longitudinal and spiral tool marks, or any other defects that may detrimentally affect their intended use. Marking: The manifold shall be marked with the DSCC drawing Part or Identifying Number (PIN), the manufacturers nam

9、e, trade mark, or CAGE code. The marking shall be permanent and legible in accordance with MIL-STD-130. Recycled, recovered, or environmentally preferable materials: Recycled, recovered, or environmentally preferable materials should be used to the maximum extent possible, provided that the material

10、 meets or exceeds the operational and maintenance requirements, and promotes economically advantageous life cycle costs. PIN: The complete PIN shall be constructed using the following format: 08007 -1 DSCC Dash Requirement number drawing Certification as an approved source of supply: In order to be

11、listed as an approved source of supply for connectors, a manufacturer shall: a. Agree to make available to DSCC, upon request, all pertinent test data on the subject part indicating compliance to the requirements herein. b. Provide to DSCC-VAI, or its designated agent, upon request, free of charge a

12、nd without obligation, a current production sample from its production line. 16236 08007 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43218-3990 A REVA PAGE3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. Packaging. For acquis

13、ition purposes, the packaging requirements shall be as specified in the contract or order. When actual packaging of material is to be performed by DoD or in-house contractor personnel, these personnel need to contact the responsible packaging activity to ascertain packaging requirements. Packaging r

14、equirements are maintained by the Inventory Control Points packaging activities within the Military Service or Defense Agency, or within the Military Departments System Command. Packaging data retrieval is available from the managing Military Departments or Defense Agencys automated packaging files,

15、 CD-ROM products, or by contacting the responsible packaging activity. DSCC drawing use. Manifolds in accordance with this drawing are intended for use when military specifications do not exist and qualified military manifolds that will perform the required function are not available for OEM applica

16、tion. This drawing is intended exclusively to prevent the proliferation of unnecessary duplicate specifications, drawings, and stock catalog listings. Acquisition requirements. Acquisition documents should specify the following: a. Complete PIN. b. Requirements for delivery of one copy of the qualit

17、y conformance inspection data pertinent to the manifold inspection lot to be supplied with each shipment by the manufacturer, if applicable. c. Requirements for certificate of compliance, if applicable. d. Requirements for notification of change of product or process to contracting activity, if appl

18、icable. e. Packaging requirements. Comments. Comments on this drawing should be directed to Defense Supply Center, Columbus, ATTN: DSCC-VAI, P.O. Box 3990 Columbus, Ohio 43218-3990 or telephone (614) 692-0565, facsimile (614) 692-6940 or emailed to FluidFlowdla.mil. Submission of certificate of comp

19、liance. The certificate of compliance submitted to DSCC-VAI, prior to listing as an approved source of supply, shall state that the manufacturers product meets the requirements of the applicable DSCC requirements drawings and stated herein. Supersession data. DSCC drawing 08007-1 replaces U S Army Tank Automotive Command (19207) drawing 10914794. 16236 08007 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43218-3990 A REVA PAGE4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-