DLA DSCC-DWG-04023-2004 CONNECTOR HIGH DENSITY KEYING PIN AND BUSHING《输入密码及套管高密度连接器》.pdf

《DLA DSCC-DWG-04023-2004 CONNECTOR HIGH DENSITY KEYING PIN AND BUSHING《输入密码及套管高密度连接器》.pdf》由会员分享，可在线阅读，更多相关《DLA DSCC-DWG-04023-2004 CONNECTOR HIGH DENSITY KEYING PIN AND BUSHING《输入密码及套管高密度连接器》.pdf（5页珍藏版）》请在麦多课文档分享上搜索。

1、REVISIONS LTR DESCRIPTION DATE APPROVED Prepared in accordance with ASME Y14.100 REV PAGE REV REV STATUS OF PAGES PAGE 1 2 3 4 5 PREPARED BY PMIC * William Carpenter DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO 43216-5000 CHECKED BY TITLE Lee Surowiec APPROVED BY Richard L. Taylor CONNECTOR, HIGH

2、DENSITY, KEYING PIN AND BUSHING SIZE CAGE CODE 037Z3 DWG. NO. 04023 Original date of drawing 12 April2004 A REV PAGE 1 OF 5 AMSC N/A 5935-E748 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.Provided by IHSNot for ResaleNo reproduction or networking permitted without

3、 license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 04023 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV PAGE 2 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. FIGURE 1. “D” keying pin. NOTES: 1. Dimensions are in inches. 2. Metric equi

4、valents are given for general information only. FIGURE 2. “PIE” keying pin. Inches mm .0004 .02 .04 .05 .063 .0744 .0755 .1000 .160 .435 .555 .001 0.010 0.51 1.02 1.27 1.60 1.890 1.918 2.540 4.06 11.05 14.10 Inches mm .0004 .0005 .0065 .02 .03 .04 .05 .0744 .0950 .160 .435 .555 0.010 0.013 0.165 0.5

5、1 0.76 1.02 1.27 1.890 2.413 4.06 11.05 14.10 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 04023 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV PAGE 3 NOTES: 1. Dimensions are in inches. 2. Metric equiva

6、lents are given for general information only. FIGURE 3. “D” keying bushing. NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. FIGURE 4. “PIE” keying bushing. Inches mm .001 .002 .005 .010 .021 .116 .160 .166 0.02 0.05 0.13 0.25 0.53 2.95 4.06 4.23 Inch

7、es mm .001 .002 .003 .005 .010 .111 .160 .166 0.02 0.05 0.08 0.13 0.25 2.82 4.06 4.23 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 04023 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV PAGE 4 REQUIREMENTS

8、 Keying pins and bushings described in this drawing shall meet the requirements of DSCC drawing 89065. Dimensions and configuration: See figures 1 through 4 and table I. TABLE I Type designation. DSCC drawing PIN Key or bushing type 04023-01 “D” keying pin 04023-02 “PIE” keying pin 04023-03 “D” keyi

9、ng bushing 04023-04 “PIE” keying bushing Material: Keying pins shall be stainless steel 303Se (UNS designation 30323) condition A in accordance with ASTM A582. Keying bushings shall be sintered metal in accordance with Metal Powder Industries Federation (MPIF) SS-316 NI-25, or stainless steel in acc

10、ordance with ASTM A582. Finish: Keying pins and keying bushings shall be passivated in accordance with SAE-AMS-QQ-P-35. Interface: The keying pins and bushings are for use with connectors described in DSCC drawings 93002 through 93013, 02007, and 03032. Marking: The Part or Identifying Number (PIN)

11、shall be marked on the package in accordance with MIL-STD-1285. Size, surface conditions, and other design considerations do not allow for full marking on the part, marking on the package only required. The PIN shall include the complete DSCC PIN, manufacturers name or CAGE code, and date code. The

12、marking on the package shall be permanent and legible. The PIN shall be constructed using the follow format: 04023 - XX DSCC drawing Pin or bushing number (see table I) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 0402

13、3 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV PAGE 5 Approved sources of supply are listed herein. Additional sources will be added as they become available. The vendors listed on the requirements drawing have agreed to this drawing and a certificate of compliance has been submitte

14、d to DSCC-VAI. DSCC drawing PIN Vendor CAGE Number Vendor similar PIN 1/ 04023-01 61947 071-0012-171 04023-02 61947 071-0013-171 04023-03 61947 096-0010-171 04023-04 61947 096-0011-171 1/ Caution: Parts must be purchased to this DSCC PIN to assure that all performance requirements and tests are met. Vendor CAGE Vendor name number and address 61947 Itron Corporation 3131 S. Austin Avenue Cicero, IL 60804-3730 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-