DLA AN531 REV 5 (1)-1996 SCREW TAPPING THREAD FORMING OR THREAD CUTTING 82 DEG FLAT HEAD SPACED THREAD《宽螺距平头82度螺纹切削或螺纹成型的自攻螺针》.pdf

《DLA AN531 REV 5 (1)-1996 SCREW TAPPING THREAD FORMING OR THREAD CUTTING 82 DEG FLAT HEAD SPACED THREAD《宽螺距平头82度螺纹切削或螺纹成型的自攻螺针》.pdf》由会员分享，可在线阅读，更多相关《DLA AN531 REV 5 (1)-1996 SCREW TAPPING THREAD FORMING OR THREAD CUTTING 82 DEG FLAT HEAD SPACED THREAD《宽螺距平头82度螺纹切削或螺纹成型的自攻螺针》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、I INCH-POUND I AN531 RW. 5 AMENDMENT 1 20 May 1996 AIR FORCE - NAVY AERONAUTICAL STANDARD SCREW, TAPPING, THREAD FORMING OR THREAD CUTTING, 82 DEGREE, FLAT HEAD, SPACED THREAD This amendment forms a part of AN531 REV. 5, dated , 17 February 1959 and is approved for use by all Departments and Agencie

2、s of the Department of Defense. PAGES 1, 2 and 3 In Procurement Specification Block delete: “MIL-S-6033“ and substitute: “FF- S-107“. PAGE 3 The fifth and sixth sentences under part number examples “Subject to AND10087 limitations . .I8 delete: “AND1008788 and substitute: “MS.33749“. Custodians: Navy - AS Air Force - 99 Preparing Activity: DU-IS (Project 53 05 -2 13 3 1 AMSC N/A FCC 5305 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-