DLA A-A-55569 1 C-2011 FUSE INCLOSED LINK FAST ACTING 1 AMPERE (A) THROUGH 40 A AUTOMOTIVE BLADE TYPE.pdf

《DLA A-A-55569 1 C-2011 FUSE INCLOSED LINK FAST ACTING 1 AMPERE (A) THROUGH 40 A AUTOMOTIVE BLADE TYPE.pdf》由会员分享，可在线阅读，更多相关《DLA A-A-55569 1 C-2011 FUSE INCLOSED LINK FAST ACTING 1 AMPERE (A) THROUGH 40 A AUTOMOTIVE BLADE TYPE.pdf（6页珍藏版）》请在麦多课文档分享上搜索。

1、AMSC N/A FSC 5920 INCH-POUND A-A-55569/1C 12 October 2011 SUPERSEDING A-A-55569/1B 5 October 2006 COMMERCIAL ITEM DESCRIPTION SPECIFICATION SHEET FUSE, INCLOSED LINK, FAST ACTING, 1 AMPERE (A) THROUGH 40 A, AUTOMOTIVE BLADE TYPE The General Services Administration has authorized the use of this comm

2、ercial item description for all federal agencies. The complete requirements for procuring inclosed link fuses described herein shall consist of this document and the issue in effect of A-A-55569. CLASSIFICATION/PART OR IDENTIFICATION NUMBER (PIN). This commercial item description (CID) specification

3、 sheet uses a classification system which is included in the PIN as shown in the following example (see NOTES). AA55569 /01 - 001 CID number Applicable CID specification sheet (two digits) Dash number SALIENT CHARACTERISTICS. Interface and physical dimensions. Fuses supplied to this CID specificatio

4、n sheet shall be as specified herein, and shall meet the requirements of SAE J1284 for blade type, electrical fuses (see figure 1). Ampere rating. The ampere rating shall be as specified in table I. Voltage rating. The voltage rating shall be 32 V dc maximum. Opening time. The opening time shall be

5、as specified in table II. Accommodating fuseholder. Fuses supplied to this CID may be used with fuseholder CID A-A-55570/1. NOTES: PIN. The PIN should be used for Government purposes to buy commercial products to this CID specification sheet. See the classification section for PIN format example. Pr

6、ovided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55569/1C 2 NOTES: 1. Dimensions are in inches. 2. Tolerance is .005 inch (0.13 mm), unless otherwise specified. FIGURE 1. Interface and physical dimensions. Inches mm Inches mm .004 0.1 .197 5.0 .008

7、0.2 .205 5.2 .012 0.3 .217 5.5 .024 0.6 .236 6.0 .040 1.0 .571 14.5 .051 1.3 .748 19.0 .079 2.0 .768 9.58 .150 3.8 .787 20.0 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55569/1C 3 TABLE I. Electrical characteristics. CID dash number AA55569/0

8、1- Ampere rating Color code 1/ 001 1 Black 002 2 Grey 003 3 Violet 004 4 Pink 005 5 Tan 006 7.5 Brown 007 10 Red 008 15 Blue 009 20 Yellow 010 25 Natural 011 30 Green 012 35 Blue green 013 40 Amber 1/ Fuses are color-coded for easy amperage identification. TABLE II. Rating versus opening time. Perce

9、nt of rating Current rating Opening time Minimum Maximum 100 1 A - 40 A 100 hours N/A 135 1 A - 2 A .50 seconds 1,800 seconds 3 A - 40 A .75 seconds 1,800 seconds 200 1 A - 2 A .10 seconds 5 seconds 3 A - 40 A .15 seconds 5 seconds 350 1 A - 2 A .020 seconds .5 seconds 3 A - 40 A .080 seconds .5 sec

10、onds Source of documents. COMMERCIAL ITEM DESCRIPTION A-A-55570/1 - Fuseholder, Extractor Post, In-Line Type, Accommodates Fast Acting, Automotive Blade Type, Inclosed Link Fuses. (Copies of this documents is available online at https:/assist.daps.dla.mil/quicksearch/ or https:/assist.daps.dla.mil o

11、r from the DLA Document Services Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55569/1C 4 Other Publications SOCIETY OF AUTOMOTIVE ENGINEERS (SAE) SAE J1284 - Blade Type

12、 Electric Fuses, Standard. (Copies of this document is available online at http:/www.sae.org/ or from the Society of Automotive Engineers, 400 Commonwealth Drive, Warrendale, PA 15096-0001.) (Industry association specifications and standards are generally available for reference from libraries. They

13、 are also distributed among technical groups and using Federal agencies.) Commercial products. As part of the market analysis and research effort, this CID specification sheet was coordinated with the following manufacturers of commercial products. At the time of CID specification sheet preparation

14、and coordination, these manufacturers were known to have commercial products that would meet the requirements of this CID specification sheet. (NOTE: This information should not be considered as a list of approved manufacturers or be used to restrict procurement to only the manufacturers shown.) MFR

15、s CAGE MFRs name and address 71400 Cooper Bussmann, Incorporated P. O. Box 14460 St. Louis, MO 63178-4460 Phone number (636) 394-2877 Facsimile number (800) 544-2570 E-mail: mailto: Uniform Resource Locator (URL): http:/ 75915 Littelfuse Incorporated 8755 West Higgins Road, Suite 500 Chicago, IL 606

16、31-2701 Phone number (773) 628-1000 E-mail: mailto: URL: http:/ Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55569/1C 5 Part number (P/N) supersession data. These CID specification sheet PINs supersede the following MFRs P/Ns as shown. This in

17、formation is being provided to assist in reducing proliferation in the Government inventory system. TABLE III. P/N supersession data. CID dash number AA55569/01- (see table I) MFRs CAGE MFRs P/N 1/ MFRs CAGE MFRs P/N 1/ 001 N/A N/A 75915 257001 002 N/A N/A 75915 257002 003 71400 ATC-3 75915 257003 0

18、04 71400 ATC-4 75915 257004 005 71400 ATC-5 75915 257005 006 71400 ATC-7.5 75915 257007.5 007 71400 ATC-10 75915 257010 008 71400 ATC-15 75915 257015 009 71400 ATC-20 75915 257020 010 71400 ATC-25 75915 257025 011 71400 ATC-30 75915 257030 012 N/A N/A 75915 257035 013 71400 ATC-40 75915 257040 1/ Th

19、e manufacturers P/N shall not be used for acquisition to the requirements of this CID specification sheet. At the time of preparation of this CID specification sheet, the aforementioned commercial products were reviewed and could be replaced by the CID PIN shown. For actual part marking requirements

20、, see the marking paragraph of A-A-55569. National stock number (NSN). The following is a list of NSNs assigned which correspond to this CID specification sheet. The list is for information only and may not be indicative of all possible NSNs associated with the CID specification sheet. For up to dat

21、e information on assigned NSNs, please contact the aforementioned DLA Land and Maritime office listed in A-A-55569. TABLE IV. NSNs. Dash number (see table I) AA55569/01- NSN Dash number (see table I) AA55569/01- NSN 001 5920-01-382-4861 008 5920-01-149-6952 002 N/A 009 5920-01-085-0825 003 5920-01-1

22、23-5210 010 5920-01-149-6953 004 5920-01-369-1801 011 5920-01-188-6294 005 5920-01-123-5212 012 N/A 006 5920-01-253-1494 013 N/A 007 5920-01-123-5211 Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extens

23、iveness of the changes. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55569/1C 6 MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: GSA - FAS Custodians: Navy - EC Preparing activity: DLA - CC DLA-CC Project 5920-2011-002 NOTE: The activit

24、ies listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-